This thesis presents a comparison of time-domain and frequency-domain algorithms for phase noise calculation in oscillators. Floquet theory provides the mathematical foundation for these calculations and the numerical methods employ perturbation projection vectors (PPVs). The PPVs are an estimate of an oscillator's sensitivity to noise.
The in-house circuit simulator SPICE3...
Designing spectral efficient, high-speed wireless links that offer high quality-
of-service and range capability has been a critical research and engineering challenge. In this thesis, we mainly address the complexity and performance issues of
channel estimation and data detection in multiple-input multiple-output (MIMO)
orthogonal frequency division multiplexing (OFDM) systems over...
Functional programming is concerned with referential transparency, that is, given a certain function and its parameter, that the result will always be the same. However, it seems that this is violated in applications involving uncertainty, such as rolling a dice. This thesis defines the background of probabilistic programming and domain-specific...
This thesis presents new, compact configurations for RF/microwave bandstop and lowpass filters for embedded passive applications. A simple design methodology is presented for designing the folded-transmission line filters on a microstrip platform. Unlike the conventional stub-loaded filter designs, the proposed folded-line filters will have practical dimensions for a wide range...
The purpose of this thesis is to explore dependency speculation in Dynamic Simultaneous Multi-Threading (DSMT). DSMT is a microprocessor architecture which attempts to extract Thread Level Parallelism (TLP) from single-threaded programs at run-time. This is accomplished by running multiple iterations of program loops in parallel. The DSMT architecture was originally...
Continuously tunable diode laser sources coupled to single-mode fiber are useful sources for fiber Bragg grating (FBG) strain sensors. This paper describes the
development and fabrication of such a device. An introduction is given describing
applications of tunable lasers and some of the different methods of creating a tunable
diode...
Commonly proposed ocean wave energy converters (OWEC) use inefficient and maintenance demanding intermediate hydraulic and pneumatic systems. We propose a novel rotary direct-drive OWEC that eliminates these intermediate stages. The new device employs a contactless force transmission system (CFTS) comprising a “piston” and a “cylinder” and a ball screw to...
Digital-to-analog converters (DACs) suffer from static and dynamic nonlinearity problems, which degrade their accuracy and performance. Mismatch errors in the analog components restrict the maximum achievable linearity.
This thesis presents various techniques for correcting these errors. It describes a correction process for the nonlinear behavior of DACs, on three different...
There is a large and growing market for portable consumer audio products
with very small size. As the size of these products is reduced, the area occupied
by batteries becomes significant and hence limits the number of batteries to one.
In order to build such small products, high levels of...
Active contour models have been widely applied to image segmentation and
analysis. It has been successfully used in contour detection for object recognition,
computer vision, computer graphics, and biomedical image processing such as X-ray,
MRI and Ultrasound images.
The energy-minimizing active contour models or snakes were developed by Kass,
Witkin...
Previous research has revealed gender differences that impact females’ willingness to adopt software features in end users’ programming environments. Since these features have separately been shown to help end users problem solve, it is important to female end users’ productivity that we find ways to make these features more acceptable...
Recently, continuous-time ΔΣ modulators are appearing increasingly often in both the literature and the marketplace due to their features of inherent antialiasing and relaxed requirements for opamp and so on. However, several nonideal factors such as clock jitter, excess loop delay, inter-symbol interference and so on, degrade the SNR performance...
A large number of sequential decision-making problems in uncertain environments
can be modeled as Markov Decision Processes (MDPs). In such settings, an agent
can observe at each time step the state of the environment and then executes an
action, causing a stochastic transition to a new state of the environment...
The design of a 10-bit pipelined charge redistribution DAC employing MOSCAPs biased in their accumulation mode is presented in this thesis. A switched capacitor filter and output buffer have also been designed for the system. The effect of MOSCAP nonlinearity on the performance of the pipelined charge redistribution DAC has...
With the ever-increasing demand for portable devices used in applications
such as wireless communication, mobile computing, consumer electronics, etc.,
the scaling of the CMOS process to deep submicron dimensions becomes more
important to achieve low-cost, low-power and high-performance digital systems.
However, this downscaling also requires similar shrinking of the supply...
End-user programmers, because they are human, make mistakes. However, past research has not considered how visual end-user debugging devices could be designed to ameliorate the effects of mistakes. This paper empirically examines oracle mistakes mistakes users make about which values are right and which are wrong to reveal differences in...
Ultra-wideband (UWB) radio is the transmission of data using an extremely wide bandwidth and very low power spectral density. In this thesis, the mereits and challenges of UWB architectures versus conventional narrowband architectures will be compared. Pulsed UWB systems can be implemented with very simple architectures. These advantages make UWB...
Ferrites have been used for various high frequency applications as bulk
materials. These applications, however, are limited to large dimension devices. In
this thesis, thin film ferrites were deposited from a low temperature solution-based
deposition process that is suitable for micro-scale high frequency applications. The
low temperature nature of this...
A discrete trap model is developed and employed for elucidation of thin-film transistor (TFT) device physics trends. An attractive feature of this model is that only two model parameters are required, the trap energy depth, E[subscript T], and the trap density, N[subscript T]. The most relevant trends occur when E[subscript...
Digital phase-locked loops (PLLs) have been receiving increasing attention recently due to their ease of integration, scalability and performance comparable to their analog counterparts. In digital PLLs, increased resolution in time-to-digital conversion is desirable for improved noise performance. This work describes the design and simulation of a stochastic time-to-digital converter...
The detection of motor faults at their incipient stage is of prime importance to any industrial plant. The introduction of adjustable speed drives has improved the control and the efficiency of induction motors, however, this has changed the nature of motor faults and how they can be detected.
Current signature...
Circuits operating outside the earth’s atmosphere are more vulnerable to cosmic radiation and require special design consideration. The purpose of this work is to explore methods of mitigating the effect of radiation in phase locked loop (PLL) circuits. Several voltage controlled oscillators (VCOs) and two complete PLLs are designed and...
This thesis presents a Z-parameter based model to predict the substratenoise coupling between two contacts in a heavily doped substrate for frequenciesless than 2 GHz. The empirical model is scalable with contact size and spacingsbetween the contacts and model parameters can be readily extracted from simu-lated or measured data. The...
Spacecrafts experience radiation in the course of their operation
and all electronic equipment on board these spacecrafts has to
be designed to withstand the effects of this radiation.
This thesis describes the effects of total ionization dose (TID)
and single event transients (SET) in phase-locked loops - an
important circuit...
Spiral inductors are a key component of mixed-signal and analog integrated circuits (IC's). Such circuits are often fabricated using silicon-based technology, owing to the inherent low-cost and high volume production aspects. However, semiconducting substrate materials such as silicon can have adverse effects on spiral inductor performance due to the lossy...
Successful software systems evolve over their lifetimes through the cumulative changes made by software maintainers. As software evolves, the problems resulting from software change worsen, exacerbated by increased system size and complexity, lack of program understanding, amount of effort required to make changes, and number of personnel involved. Experience shows...
The world market for sensors is several hundred million dollars growing at an annual rate of 20 percent with accelerometers comprising 19 percent of the market. With an increasing market, a wide range of applications with varying degrees of resolution are in demand. Therefore, there is sufficient motivation for developing...
At frequencies exceeding 1-2 GHz, the substrate network models used in substrate coupling simulation must account for the reactive nature of the substrate. Unlike at low frequencies, where the purely resistive substrate models can be validated through DC resistance measurements, these high-frequency models, comprising reactive components, must be validated through...
This work focusses on the modeling and the development of efficient coupled simulation techniques for MEMS based RF oscillators. High-level models for MEMS based varactors have been discussed and their accuracy issues are identified, based on comparisons with numerical simulations. A faster simulation approach based on the time-domain shooting method...
A methodology for rapid estimation of substrate noise generated by digital circuitry in mixed-signal circuits is presented. This methodology is incorporated into the Silencer! framework, and also provides for future improvements including pre-layout noise estimation. Measurements of a test chip fabricated in the TSMC o.25[mu]m heavily doped logic process validate...
The primary focus of this thesis involves modeling and development of p-type thin-film transistors (p-TFTs), moving towards the realization of a filly transparent thin-film transistor (TTFT). The modeling portion of this thesis emphasizes the development of physics-based TFT models, specifically focusing on the elucidation of non-ideal current-voltage characteristic behavior. A...
The long-term goal of this research project is the development of solution-based inorganic dielectric and semiconductor materials for inkjet printed electronics. The main focus of this thesis involves testing of the materials and devices under development. A new solution-based inorganic dielectric material (HfOSO₄), given the name hafsox, is developed and...
Authenticated-Encryption modes of operation have recently received great atten- tion amongst researchers. Such modes of operation provide both privacy and authentic- ity. A proposed mode in this category is the Offset Codebook mode (OCB) by Rogaway et al. This mode shows great substantial advantages over conventional modes. In the past...
As more advanced hybrid electric vehicles begin emerging onto the commercial market, design algorithms for their control become increasingly more complicated. One major hurdle for designers is the mitigation and control of the created high frequency harmonics caused from switching the dc voltage into an ac voltage by use of...
Passive components, including spiral inductors and transformers, fabricated on silicon-based substrates are placing an increasing demand on radio-frequency integrated circuit (RFIC) design. Performance of the RFIC suffers from several non-ideal effects that must be taken into account in order to create a successful design. In particular, monolithic transformers can be...
Time of Arrival (TOA) is a popular technique used for geolocation. This thesis evaluates the use of TOA techniques indoors. The accuracy of measuring distances using TOA is dependent on the bandwidth of the system and the multipath conditions between the receiver and transmitter. System bandwidth has a significant effect...
The focus of this work is on developing algorithms for frequency domain steady-state analysis of oscillators. Convergence problems associated with the frequency domain harmonic balance simulation of oscillators have been examined. Globally convergent homotopy methods have been combined with the harmonic balance method for robust high-Q oscillator simulation. Various homotopy...
AES (Advanced Encryption Standard), also known as Rijndael, is a symmetric key block cipher adopted as an encryption standard by the US government and used extensively in cryptographic applications worldwide. ARM is the most popular processor core used in embedded applications. This thesis surveys the available public implementations of AES...
Preventative methods for software reverse engineering have been given greater attention in recent times due to the increase in computational resources and tools available to the public. The inherent security provided by encoding source into machine code (executable form) can no longer be assumed, given the availability of effective automated...
Modular arithmetic is a basic operation for many cryptography applications such as public key cryptography, key exchange algorithms, digital signatures, and elliptic curve cryptography. Therefore, fast and efficient hardware design of modular division and multiplication is proposed for implementation of cryptography system with intent to achieve information security. The hardware...
Spatial Supervised Learning seeks to learn how to assign a label to each pixel in a spatial grid
such as the pixels of remote-sensed images. The standard approach is to treat each grid cell
separately and to use only the measured features of the grid cell to determine the assigned...
A class of high-performance thin-film transistor (TFT) channel materials has emerged
involving oxides composed of heavy-metal cations (HMCs) with (n-1)d¹⁰ns⁰ (n≥4)
electronic configurations. This thesis is devoted to the pursuit of three topics involving
the development of these materials for TFT applications: modeling TFT currentvoltage
characteristics, an exploratory method for...
We have developed a framework for Web-based GIS/database (WebGD) applications
that allow users to insert, query, and delete data with map interfaces displayed by Web
browsers. The framework uses such open source software packages as Minnesota
MapServer, PostGIS, and PostgreSQL. With this framework, we can create the map
interface of...
Digital libraries are digitally accessible, organized collections of knowledge. Although under this broad definition any digitally accessible data set might be considered a digital library, the term is generally reserved for collections whose structures are carefully documented and made available in the form of so-called metadata. There is no specific...
New video-conference devices based on omnidirectional multi-camera systems have been emerging in the last few years. These devices require innovative and automated video quality assessment in the earlier stages of their design in order to guarantee competitive product development and quality monitoring. Current quality assessment techniques are not adequate since...
Industry today is pushing personal portable handheld communication de- vices, from cellular telephones to personal navigation systems, and society is embracing the push. The goal is to make compact multi-functional handheld products that can transfer information to those around us through high bandwidth mobile communications. These modules rely heavily on...
Current database systems apply access control mostly on tables and columns.
However, many applications require access control on individual rows in database
tables. Therefore, we have implemented a row-based access control mechanism. In
our model for access control, object groups, in addition to user groups, are used to
reduce the...
In many areas of engineering and applied mathematics, spectral methods provide very powerful tools for solving and analyzing problems. For instance, large to extremely large sizes of numbers can efficiently be multiplied by using discrete Fourier transform and convolution property. Such computations are needed when computing π to millions of...
Symmetric key block ciphers, such as AES, are well known and frequently used. There are five confidentiality modes of operation that are currently recommended for use with a symmetric key block cipher algorithm: Electronic Codebook (ECB), Cipher Block Chaining (CBC), Cipher Feedback (CFB), Output Feedback (OFB), and Counter (CTR). This...
Advanced Encryption Standard (AES) is one of the secret key algorithms used in Cryptography. It is applied in a variety of applications including smart cards, internet web servers, automated teller machines (ATMs), etc. Both hardware and software implementations are taken into consideration while addressing AES algorithms. In addition to reaching...