Knowledge workers are struggling in the information flood. There is a growing interest in intelligent desktop environments that help knowledge workers organize their daily life. Intelligent desktop environments allow the desktop user to define a set of “activities” that characterize the user’s desktop work. These environments then attempt to identify...
Partial programming is a field of study where users specify an outline or skeleton of a program, but leave various parts undefined. The undefined parts are then completed by an external mechanism to form a complete program. Adaptation-Based Programming (ABP) is a method of partial programming that utilizes techniques from...
The broadband wireless interference in a computer platform is resulted by multiple electro-magnetic emission sources. This non-Gaussian interference is proved to be double-sided K-distributed in previous research. With the limitation of transmission power and dimension of the device, interference mitigation is an efficient way to improve received signal bit error...
This thesis presents an adaptive modulation scheme using a Walsh-code modulator. The Walsh-code modulator consists of a dynamic demultiplexer and predetermined sets of orthogonal Walsh-Hadamard codes. The demultiplexer can demultiplex the input bit stream into a maximum of thirty-two sub-streams. The Walsh- Hadamard codes are used to spread the spectrum...
As the number of mobile devices accessing large-scale WLANs such as campus
and metropolitan area networks increases, the need for load balancing among the
cells becomes crucial. In addition, the network must also support some minimum
handoff tolerance defined by an application.
A number of load balancing techniques have been...
Movement intent decoders, which interpret volitional movement intent from human bioelectric signals, can be incorporated into modern neuroprostheses to offer people living with limb loss or paralysis the potential to regain their lost motor control. Machine learning methods have become the research standard for continuous decoders with high degrees of...
Rapid advances in wireless networking have led to more mobile phones, PDAs, and other digital mobile devices becoming ubiquitously connected to the Internet. As the demand of delay sensitive real-time applications for these portable devices increases, providing seamless connectivity to wireless networks becomes a critical issue. For this reason, a...
The ubiquity of high quality video and proliferation of mobile devices has contributed to an unprecedented rise in video consumption. HTTP, in conjunction with adaptive streaming, has become the de facto mechanism for delivering the vast majority of video as it readily caters to heterogeneous networks and devices. This dissertation...
Heatmap regression has became one of the mainstream approaches to localize facial landmarks. As Convolutional Neural Network (CNN) and Recurrent Neural Network (RNN) are becoming popular in solving computer vision tasks, extensive research has been done on these architectures. However, the loss function for heatmap regression is rarely studied. In...
The exponential rate of advances in modern communication devices in the last several years have brought us higher levels of functionality and performance as well as reductions in physical size and power consumption. To continue this rate of advancement, next generation systems require wider bandwidth and higher resolution ADCs. Additionally,...
The Internet is growing rapidly in terms of websites, users and uses. People use the Internet for reference, shopping, social networking, communications, business and much more. Though the Internet is useful, there are many risks associated with its use, like malicious websites, identity theft, hateful content and fraudulent practices. Online...
Markov Decision Process (MDP) is a well-known framework for devising the optimal decision making strategies under uncertainty. Typically, the decision maker assumes a stationary environment which is characterized by a time-invariant transition probability matrix. However, in many real-world scenarios, this assumption is not justified, thus the optimal strategy might not...
In modern on-chip memories, an increasing demand for higher performance, lower power, reduced area, and improved robustness creates a rising need for advanced microarchitecture and circuit design techniques. Particularly in large-signal multi-ported register files, these advanced design techniques include: (i) multi-banked arrays, (ii) multi-frequency arrays, (iii) multi-bit width gating, (iv)...
Traditionally linear actuator applications are addressed by the use of hydraulic systems. The high maintenance cost and poor reliability will always be the most critical problem in the real applications. Benefited from both the high mechanical advantage of the roll screw and the simple structure of the switched reluctance motor,...
The appropriate separation of concerns is a fundamental engineering principle. A concern, for software developers, is that which must be represented by code in a program; by extension, separation of concerns is the ability to represent a single concern in a single appropriate programming language construct. Advanced separation of concerns...
This dissertation proposes the use of advanced time-varying approaches for modeling the dynamics of the multipath channel in wireless communication networks. These advanced time-varying approaches include linear Kalman innovation models in observable block companion form, and neural network-based models. The e˙ectiveness of these type of models is evaluated through three...
Preventative methods for software reverse engineering have been given greater attention in recent times due to the increase in computational resources and tools available to the public. The inherent security provided by encoding source into machine code (executable form) can no longer be assumed, given the availability of effective automated...
Cryptographic devices leak timing and power consumption information that is easily measurable, radiation of various levels, and more. Such devices also have additional inputs, other than plaintext and keys, like voltage, which can be modified to force the device to produce certain faulty outputs that can be used to reveal...
Simultaneous translation, which translates concurrently with the source language speech, is widely used in many scenarios including multilateral organizations. However, it is well known to be one of the most challenging tasks for humans due to the simultaneous perception and production in two languages. On the other hand, simultaneous translation...
Global Positioning Systems have allowed for precise timing of power system measurements over wide areas. This newly found capability has the potential to provide much greater insight into the operation of the power system and its response to contingencies, but few analytical techniques currently exist that provide enough robustness and...
Question Answering in natural language processing has achieved significant progress in recent years. Yet, training and testing set methodology to evaluate the language models has proved inadequate. Adversarial examples aid us in finding loopholes inside these models and provide insights into their inner workings. In this work, an evaluation based...
We consider the problem of strategic adversarial planning in a Real-Time Strategy (RTS) game. Strategic adversarial planning is the generation of a network of high-level tasks to satisfy goals while anticipating an adversary's actions. In this thesis we describe an abstract state and action space used for planning in an...
Increased penetration of renewable energy sources results in higher operating reserve requirements, due to the inherent variability and uncertainty of these resources. Many studies, primarily focusing on wind and solar, have determined that geographic diversity of variable renewables substantially reduces system variability and uncertainty. The Pacific Northwest is well suited...
The tools and infrastructure used in tech, including Open Source Software (OSS), can embed “inclusivity bugs”—features that disproportionately disadvantage particular groups of contributors. To see whether OSS developers have existing practices to ward off such bugs, we surveyed 266 OSS developers. Our results show that a majority (77%) of developers...
The aim of the research undertaken for this thesis was to develop a new high-performance amorphous oxide semiconductor (AOS) for use as a channel layer in a thin-film transistor (TFT). AOS TFTs offer higher electron mobility than the established amorphous silicon based technology. A new channel material comprised of aluminum...
This thesis presents algorithms and tools for the automated design of RF LC CMOS voltage controlled oscillators (VCOs) with low phase noise given a set of specifications. The electromagnetic solver, ASITIC, combined with the circuit simulator, SpectreRF, allows optimization of the VCO circuit parameters and inductor layout. This approach gives...
Within the past several years the technology of high-throughput sequencing has transformed the study of biology by offering unprecedented access to life's fundamental building block, DNA. With this transformation's potential a host of brand-new challenges have emerged, many of which lend themselves to being solved through computational methods. From de...
The research presented herein represents an effort to combine the ultra-smooth surface of an amorphous metal thin film (AMTF) with a solution-processed dielectric synthesized via prompt inorganic condensation (PIC). Analysis of dielectric film quality is carried out via electrical measurements of metal-insulator-metal (MIM) diodes. Anneals at 500 and 700 °C...
The objective of this thesis is to provide an initial demonstration of two-terminal and three-terminal electronic devices employing amorphous multi-component metallic film
(AMMF) electrodes. Such a demonstration is successfully achieved in the fabrication of metal-insulator-metal (MIM) diode and hot electron transistor (HETs) structures employing ZrCuAlNi AMMF electrodes. The ultra-smooth surface...
Amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) constitute the central theme of this thesis. Within this theme, three primary areas of focus are pursued.
The first focus is the realization of a transparent three-stage ring oscillator with buffered output and an output frequency in the megahertz range. This leads to...
The focus of this thesis is the investigation of thin-film transistors (TFTs) based on amorphous oxide semiconductors (AOSs) in two circuit applications. To date, circuits implemented with AOS-based TFTs have been primarily enhancement-enhancement inverters, ring oscillators based on these inverters operating at peak frequencies up to ~400 kHz, and two-transistor...
In this thesis, convergence of time inhomogeneous Markov chains is studied using an adiabatic approach. The adiabatic framework considers slowly changing systems and the adiabatic time quantifies the time required for the change such that the final state of the system is close to some equilibrium state. This approach is...
Renewable energy, particularly wind power, has increased dramatically over the past two decades. In the Pacific Northwest, the power system has accommodated a large amount of new wind power. The variability of wind power has introduced many challenges, requiring additional reserve generation to be available to maintain system stability. The...
Students’ success is one of the foremost objectives in higher education, and their self-efficacy plays a prominent role in students’ achieving their full potentials. It is especially important in STEM fields, which often suffer from higher attrition rates. Therefore, it is important to understand students’ self-efficacy levels at an early...
This thesis considers the problem of training convolutional neural networks for online visual tracking. A major challenge for single object visual tracking is that most training sets with frame-level track annotations are quite small, due to the prohibitive cost of manual annotation. Current training approaches either supplement the annotations with...
The Internet of Things (IoT) paradigm brought an ever-increasing dependence on low-power devices to collect sensor data and transmit that information to the cloud, placing greater demand on connectivity and lifespan. In response, rapid worldwide innovation demonstrates the trade-offs in processing, communication, and energy consumption with diverse approaches to low-power...
Smart home devices, such as voice assistants, smart lights, and smart video doorbells have become a part of end users' daily lives. Many of these devices combine their features with other services and smart devices to create a simple and efficient user experience. This is partly because of the contribution...
Protecting end-users privacy and building trust are the two most important factors needed to support the growth of ecommerce. The increased dependence on the Internet for a wide variety of daily transactions causes a corresponding loss in privacy for many users, as virtually all websites collect data from users directly...
This thesis presents a Z-parameter based model to predict the substratenoise coupling between two contacts in a heavily doped substrate for frequenciesless than 2 GHz. The empirical model is scalable with contact size and spacingsbetween the contacts and model parameters can be readily extracted from simu-lated or measured data. The...
As more features are being integrated into mobile platforms, the demand for
long battery life during standby mode has been increasing. Light load efficiency
becomes one of essential features in today's DC-DC converter. The most effective
method to improve light load efficiency is to operate the DC-DC converter under
pulse-frequency-modulation...
We model the popular board game of Clue as an MDP and evaluate Monte-Carlo policy rollout in a simulated environment pitting different agents and policies against each other. We describe the choices we made in the representation, along with some of the problems we encountered along the way. We find...
An enhanced swing differential Colpitts VCO (ESDC-VCO) dramatically improves
the swing of a Colpitts VCO by allowing the signal to swing below ground and above the
supply voltage. Fabricated in a 1P8M 0.13 um CMOS process, the ESDC-VCO operates
at 4.9GHz with a 0.475-V supply and consumes 2.7mW. The measured...
Macrosomia is a medical term describing a new baby born with an excessive birth weight (greater than 4000g). Fetal macrosomia may lead to both pregnancy complications, and increased risk of mother's and baby's health problems after birth. But the potential complications may be mitigated by a cesarean delivery. As such,...
There is a growing interest in bringing online and streaming content to the television. Gaming platforms such as the PS3, Xbox 360 and Wii are at the center of this digital convergence; platforms for accessing new media services. This presents a number of interface challenges, as controllers designed for gaming...
Forward Error Correction and retransmission are two approaches used to reliably broadcast data in a network with poor quality of service. Taking some assumptions, it has been suggested that a retransmission based reliable broadcasting scheme using network coding should in theory provide an increase in bandwidth efficiency by combining packets...
This work presents an inductor less switched capacitor based energy harvester, which can simultaneously harvest from 2 energy sources (Solar + Piezo). The proposed harvester employs 2D maximum power point tracking algorithm, by changing the conversion ratios of the charge pumps for piezo and solar sources, and 1D voltage regulation...
Merge conflicts have long plagued software development. With larger and more dispersed teams comes greater risk of developers working on the same code at the same time. While merge conflicts are known to be painful, their exact impact on software is still largely unknown. Are merge conflicts an isolated problem,...
This paper presents an overview of cogeneration, also known as combined heat and power (CHP). The technology of cogeneration is described and the three primary cogeneration processes are discussed. The transition between parallel operation with the utility and stand-alone operation is discussed. The tradeoff between a synchronous and an induction...
An ultra low power crystal oscillator that provides a frequency reference for battery
powered timekeeping applications is presented. An amplitude control circuit is employed to ensure that minimum current is consumed. A subthreshold voltage regulator provides a supply voltage for the oscillator with minimum current consumption. The oscillator and regulator...
A fully integrated CMOS GPS receiver RF front end optimized for low power operation is presented. The system operates with a supply voltage down to 250 mV. A prototype has been fabricated in a 0.13μm CMOS process and includes a low voltage LNA, quadrature oscillators, and quadrature mixers. It exhibits...
This dissertation focuses on the analysis, design, and application of inductor-capacitor (LC) oscillators for wireless sensor networks (WSNs).
First an analysis and design optimization approach for enhanced swing, low power CMOS LC oscillators is presented. A phasor based analysis is used for determining the amplitude and phase noise of these...
High speed serial links are critical components for addressing the growing demand for I/O bandwidth in next-generation computing applications, such as many-core systems, backplane and optical data communications. Due to continued process scaling and circuit innovations, today's CMOS serial link transceivers can achieve tens of Gb/s per pin. However, most...
The release of the IEEE802.15.6 standard has led to increased interest in low-power technologies for wireless body-area-networks (WBANs). The power dissipation, supply voltage, and die area are some of the most important criteria for successful WBAN implementations. Digital-intensive RX architectures can potentially result in sub-1V operation with significant reductions in...
The electrical behavior of on-chip interconnects has become a dominant factor in silicon-based high speed, RF, and mixed-signal integrated circuits. In particular, the frequency-dependent loss mechanisms in heavily-doped silicon substrates can have a large influence on the transmission characteristics of on-chip interconnects. To optimize the performance of the integrated circuit,...
Passive components, including spiral inductors and transformers, fabricated on silicon-based substrates are placing an increasing demand on radio-frequency integrated circuit (RFIC) design. Performance of the RFIC suffers from several non-ideal effects that must be taken into account in order to create a successful design. In particular, monolithic transformers can be...
A novel method for modeling bends in coplanar waveguides (CPWs) is described. The CPW can be viewed as a pair of parallel coupled quasi-slot lines. Bends in the CPW are modeled as a non-uniform coupled line system in terms of their even- and odd- mode characteristics. This modeling approach is...
A new comprehensive wide-band compact modeling methodology for single-ended spiral inductors and differential spiral inductors is presented. The new modeling methodology creates an equivalent circuit model consisting of frequency-independent circuit elements for use in circuit simulators. A fast automated extraction procedure is developed for determining the circuit element values from...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
Modern wind energy is the technology of choice with a short payback period for increasing renewable energy portfolios. Bonneville Power Administration (BPA), a United States power authority in the Pacific Northwest expects to increase their wind energy capacity from 2,000 megawatts to 6,000 megawatts within the next five years. Currently...
A fundamental problem in computer vision is to partition an image into meaningful segments. While image segmentation is required by many applications, the thesis focuses on segmentation of computed tomography (CT) images for analysis and quality control of composite materials. The key research contribution of this thesis is a novel...
As the future electrical power systems tend towards smarter and greener technology, thedeployment of self-sufficient networks, or microgrids, becomes more likely. Microgridsmay operate on their own or synchronized with the main grid, thus control methodsneed to take into account islanding and reconnecting said networks. Isolation of subnetworks may be necessary...
Causal inference is an important analytical tool to bridge the gap between prediction and decision-making. However, learning a causal network solely from data is a challenging task. In this work, various techniques have been explored for a better and improved causal network learning from data. Firstly, the problem of learning...
This M.S thesis presents an interactive software tool that I have developed in the course of the past two years. This interactive tool is called AISO. AISO is aimed at interactive image segmentation and annotation tool designed to allow users to segment an image – such as those produced with...
Advances in sensor technology are greatly expanding the range of quantities that can be measured while simultaneously reducing the cost. However, deployed sensors drift out of calibration and fail, so every sensor network requires quality control procedures to promptly detect these failures. To address these problems, we propose a two-level...
Anomaly detection has been used in variety of applications in practice, including cyber-security, fraud detection and detecting faults in safety critical systems, etc. Anomaly detectors produce a ranked list of statistical anomalies, which are typically examined by human analysts in order to extract the actual anomalies of interest. Unfortunately, most...
Question answering forums like Reddit have been quite effective in improving social interaction and disseminating useful information. Community members ask a variety of questions related to a subject which are answered by other community members. The answers are given ratings by other members. In this thesis we study the problem...
We present an approach for generating a character’s response in anticipation of an impending impact. Protective anticipatory movement is built upon several simple actions that have been identified as response mechanisms in monkeys and in humans. These actions are parameterized by a model of the interaction based on the approaching...
This work addresses the application of Nonlinear Model Predictive Control (NMPC) to a class of ocean wave energy conversion systems in which the cost functional is not in a standard quadratic form, and the WEC model includes the nonlinear effects, such as the hydrodynamic viscous drag. The NMPC implementation is...
As a general solution to the problem of managing structural and content variability in relational databases, in previous work we have introduced the Variational Database Management System (VDBMS). VDBMS consists of a representation of a variational database (VDB) and a corresponding typed query language (v-query). However, since this is a...
The US military is evaluating the capabilities of emerging technologies based on IEEE 802.16 standard as a potential commercial off-the-shelf solution to support the communication requirements of the future war.
In the last few years, development in military and telecommunication industries have focused on an intensive use of broadband systems,...
The topic of species distribution modelling has been on of increasing interest in
recent years. As climate change is becoming of even more interest to researchers,
more tools are needed to better analyze and predict various climate change scenarios.
One particular area of interest is that of species distribution modeling....
Magnetic materials can be used in modern soft robotics as a method for external stimulus actuation and motion control. By combining aspects of biology and mechanics, devices are fabricated to create a structure capable of complex movement. Applications that these devices are subject to can be broken down into four...
The quality of a digital image pipeline relies greatly on its color reproduction which should at a minimum handle the color constancy, and the final judgment of the excellence of the pipeline is made through subjective observations by humans.
This dissertation addresses a few topics surrounding the color processing of...
Tensor mathematics provides a powerful language to visualize and analyze physical phenomena. In the last three decades, tensors have been used in various application areas. The visualization and analysis of tensors fields have seen much advance, both in 2D and 3D. However, the physical interpretations of the topological analysis are...
Urban green space is associated with multiple physical and mental health outcomes. Several benefits of green space, such as stress reduction and attention restoration, are dependent on visual perception of green space exposures. However, traditional green space exposure measures do not capture street-level exposures. In this project, we apply deep...
This dissertation explores the idea of applying machine learning technologies to help computer users find information and better organize electronic resources, by presenting the research work conducted in the following three applications: FolderPredictor, Stacking Recommendation Engines, and Integrating Learning and Reasoning.
FolderPredictor is an intelligent desktop software tool that helps...
In the ever-evolving field of computer science (CS) education, the significance of teachers and their backgrounds have often been overshadowed by the predominant focus on students. Teachers in the K-12 often lack the necessary expertise and have limited support provided by existing CS-based curricula. While research on CS education effectiveness...
There are growing interests in designing polynomial-time approximation schemes (PTAS) for optimization problems in planar graphs. Many NP-hard problems are shown to admit PTAS in planar graphs in the last decade, including Steiner tree, Steiner forest, two- edge-connected subgraphs and so on. We follow this research line and study several...
Modern datacenters are constructed with multirooted tree topologies and support multiple service queues per switch port. They support a wide variety of applications and services with stringent performance needs and conflicting requirements. To meet these requirements, recent works focus on load balancing or ECN marking approaches. Though existing load-balancing approaches...
This project is a custom output stage for a two-channel signal source design project at Oregon State. Starting in January, I began leading a team tasked with the development of an arbitrary waveform generator via the CreateIT Collaboratory at OSU. Undergraduate students interview into the CreateIT Collaboratory and are assigned...
Delta-sigma analog-to-digital converters (ADCs) are suitable for many applications due to several advantages such as relaxed anti-aliasing filter, high signal-to noise and distortion ratio (SNDR) and most important of all, reduced sensitivity to
analog imperfections.This thesis introduces several structures to overcome loop imperfections and stability issues in delta-sigma modulators. First,...
For today’s ubiquitous portable devices, innovative integrated circuits with high performance
yet very low power are necessary. As these devices are used to communicate and sense real world signals in the environment, analog-to-digital converters (ADC) and systems are the key interface circuits needed to digitize the sensed information and they...
Analog-to-Digital Data Converters (ADCs) used in instrumentation and measurements often require high absolute accuracy, including excellent linearity and negligible dc offset. Incremental data converters (IDCs) provide a solution for such measurement applications. Since IDCs are essentially delta-sigma converters with reset operation before each conversion, they retain most of the advantages...
Throughput-oriented processors, such as graphics processing units (GPUs), have been increasingly used to accelerate general purpose computing, including machine learning models that are being utilized in numerous disciplines. Thousands of concurrently running threads in a GPU demand a highly efficient memory subsystem for data supply in GPUs. In this dissertation,...
Most of today’s Internet of Things (IoT) applications assume that data will be moved offdevices into centralized cloud platforms. While existing IoT systems leverage cloud-based analytics for meaningful data reasoning, the assumption that data should always be moved off the devices is problematic. The amount of data to be moved...
With the advent of Artificial Intelligence (AI) in every sphere of life in today's day and age, it has become increasingly important for non-AI experts to be able to comprehend the underlying logic of how AI systems work, assess them and find faults in these systems, particularly when they are...
While there are many ways to evaluate a user interface design, the user's mental workload and situation awareness (SA) are particularly important considerations in the supervisory control of safety-critical systems. Typically, operators of these systems must monitor high-volume, time-sensitive status information. Interface design for this domain can be challenging and...
Programmers often have to choose components online for reuse based on software quality. To help with this choice, most component repositories (SourceForge, CodeProject, etc.) provide information such as user ratings and reviews of components. However, the reusability of components is not immediately obvious from
this material. To make things worse,...
As scaling of silicon (Si) based devices approaches fundamental limits, thin film metal-insulator-metal (MIM) tunnel diodes are attracting interest due to their potential for high speed operation. Because operation of these devices is based on tunneling, electrode / interfacial roughness is critical. Recently, it was shown that combining ultra-smooth bottom...
The trend towards higher resolution, faster refresh rate active-matrix liquid-crystal displays (AMLCDs) as well as the emergence of active-matrix organic light-emitting diode (AMOLED) displays is driving the demand for amorphous oxide semiconductor thin-film transistors (AOS TFTs) with higher mobility. A physics-based model for carrier transport in an amorphous semiconductor is...
Accreditation Board for Engineering and Technology, Inc. (ABET) is the primary organization responsible for monitoring, evaluating and certifying the quality of engineering, engineering technology, computing and applied sciences education in the United States. In 2000, ABET changed the way computer science (and engineering) programs are accredited from a ‘checklist’ approach...
Conventional register files spread porting resources uniformly across all registers. This paper proposes a method called Asymmetric Clustering using a Register Cache (ACRC). ACRC utilizes a fast register cache that concentrates valuable register file ports to the most active registers thereby reducing the total register file area and power consumption....
Tensor field topology is of importance to research areas of medicine, science, and engineering. Degenerate curves are one of the crucial topological features that provide valuable insights for tensor field visualization. In this thesis, we study the atomic bifurcations of degenerate curves in 3D linear second-order symmetric tensor fields, and...
Transparent conductive oxides (TCOs), primarily indium doped tin oxide, have been widely used in numerous fields since decades ago, such as solar cells, displays, OLEDs and ‘smart windows’ etc. Owing to the scarcity of indium, there is a great demand for new alternative materials. Metal/insulator/metal (MIM) diodes are a critical...
Back end of line (BEOL) metal-insulator-metal capacitors (MIMCAPs) have become a core passive component in modern integrated circuits. International Technology Roadmap for Semiconductors (ITRS) projections for scaling of analog/mixed-signal MIMCAP applications require simultaneously increasing capacitance density while maintaining low leakage current density and low voltage nonlinearity (characterized by the quadratic...
Nanolaminate dielectrics combine two or more insulating materials in a many-layered film. These structures can be made to significantly outperform films composed of a single one of their constituent materials by adjusting the composition ratio, arrangement, and size of the component layers. In this work, atomic layer deposition (ALD) is...
Atomic layer deposition (ALD) is an enabling technique for many new micro- and nanoscale technologies. The self-limiting surface chemical reactions by which ALD fundamentally operates give rise to uniquely high precision (atomic) control over deposited film thickness, uniformity over large areas, and conformality over complex and extreme topographies. One such...
The atomic solid state energy (SSE) scale is introduced as a tool for inorganic materials design. The SSE scale is obtained by assessing an average electron affinity (EA) (for a cation) or an average ionization potential (IP) (for an anion) for each atom using data from compounds having that specific...