Search Constraints

Start Over
Filtering by: Creator Schram, Julie B. Remove constraint Creator: Schram, Julie B. Academic Affiliation Mechanical, Industrial, and Manufacturing Engineering Remove constraint Academic Affiliation: Mechanical, Industrial, and Manufacturing Engineering Resource Type Masters Thesis Remove constraint Resource Type: Masters Thesis

Search Results

  • Microstructural Characterization of Porosity in U-Mo Low Enriched Uranium Plate Fuel

    Creator:
    Westman, Bjorn E.
    Abstract:
    New low enriched uranium (LEU) fuels are being developed for replacement of high enriched uranium (HEU) fuels in high power research reactors. U-Mo LEU plate fuels have been identified as a candidate for replacement of current HEU fuels. However, U-Mo fuels tend to exhibit accelerated swelling typically at fission densities...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: ______________________________________________________ Julie D

  • Corrosion Resistance of Alloys in Seawater and Supercritical Carbon Dioxide Environments

    Creator:
    Repukaiti, Reyixiati
    Abstract:
    The corrosion resistances of several alloys were investigated to optimize performance and cost in seawater and supercritical CO2 environments. Many alloys are prone to corrosion in seawater and/or supercritical CO2 containing impurity environments. Exposure and electrochemical experiments were conducted in both environments to evaluate alloys’ corrosion resistance. In seawater corrosion...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: ______________________________________________________ Julie Tucker The corrosion

  • Exploring the Ductility Minimum of Niobium C103 at Intermediate Temperatures using Triaxial Tensile Specimens

    Creator:
    Wood, Thomas N., II
    Abstract:
    This work explores the mechanical properties of single-phase niobium alloy C103 from room temperature to 600°C for the purpose of expanding safe uses of the material into new applications. The study utilizes a symmetrically notched triaxial tensile specimens to manipulate the internal stress field in order to observe the changes...
    Resource Type:
    Masters Thesis
    Full Text:
    Julie D. Tucker This work explores the mechanical properties of single-phase niobium alloy C103

  • The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

    Creator:
    Bozeman, Scott C.
    Abstract:
    Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
    Resource Type:
    Masters Thesis
    Full Text:
    Deposition. Abstract approved: _____________________________________________________ Julie D

  • Heat Treatment Effects on the Mechanical Properties and Microstructure of CPM-M4 Tool Steel

    Creator:
    Fast, Cody P.
    Abstract:
    Variations in heat treatments have significant effects on the microstructure of tool steels. For CPM-M4 tool steel, the changes in microstructure and mechanical properties were observed based off of variations in temperature. Five heat treatments with constant exposure time and variable austenitizing and tempering temperatures were performed on samples of...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: ______________________________________________________ Julie D. Tucker

  • Acceleration of Long-Range Ordering in NiCrFe Alloys Via Proton Irradiation

    Creator:
    Evered, Cole E.
    Abstract:
    This work explores the hypothesis that proton irradiation is a feasible alternative to simulate accelerated thermal aging for Ni2Cr long-range ordered phase formation within NiCr and NiCrFe alloys. In this study, various model alloys and commercial alloys 690 and 690+P (0.01 wt.% P) were subject to 2 MeV proton irradiation...
    Resource Type:
    Masters Thesis
    Full Text:
    Irradiation Abstract approved: ______________________________________________________ Julie D

  • Artificial Swarm Control Through Learning Based Leadership

    Creator:
    Tuzel, Ovunc
    Abstract:
    Collective migration in animal groups is often guided by distributed leader agents that influence their peers by modulating their motion behaviors. Distributed leadership is a promising navigation strategy for artificial swarms, but designing the leaders’ controllers is difficult due to the swarm’s collective emergent behaviors. The presented research formulates a...
    Resource Type:
    Masters Thesis
    Full Text:
    Based Leadership Abstract approved: Julie A. Adams Collective migration in animal groups is often

  • Impact of Hot Isostatic Pressing Parameters on Interface Evolution in Uranium Molybdenum Monolithic Plate Fuel

    Creator:
    Koziol, Adam
    Abstract:
    The monolithic (plate type) Uranium 10 wt.\% Molybdenum (U-10Mo) fuel system is promising for a variety of applications, most notably for the replacement of highly enriched uranium (HEU) fuels with low enriched uranium (LEU) fuel in United State High Performance Research Reactors (U.S. HPRRs). Phase transformations and secondary phase formation...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: Samuel A. Briggs Julie D. Tucker The monolithic (plate type) Uranium 10 wt.% Molybdenum (U-10Mo

  • Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

    Creator:
    Quintana, Xavier A.
    Abstract:
    Molten salts have been targeted as a promising coolant for next generation reactors due to their high boiling point, heat capacity, and thermal conductivity. Despite these benefits, molten salt systems present unique materials compatibility issues, highlighted by the aggressive corrosion attack and dealloying typically seen on materials in these environments....
    Resource Type:
    Masters Thesis
    Full Text:
    Technique Abstract approved: Samuel A. Briggs Julie Tucker Molten salts have been targeted as a promising

  • Time-Dependent Crack Growth Mechanisms in Alloy 617 at 800°C in Air

    Creator:
    Addison, Dylan, A.
    Abstract:
    Time-dependent crack growth mechanisms in Alloy 617 at 800°C in air were studied using compact tension samples machined in the L-T direction, cracked at temperature using an induction furnace and servo-hydraulic load frame. The application of different loading waveforms, including triangular, hold time, and sustained loading, were studied with relation...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Jamie J. Kruzic Julie D. Tucker Time-dependent crack growth