The United States generates over 70 million tonnes of wood waste annually, with over 27 million tonnes still available for recovery. Current recycling rates for wood waste are in the range of 10% to 15%, which is much lower than other common building materials and indicative of an underutilized resource....
Using plant fibers as a potential renewable material to substitute for glass fibers in fiber-reinforced polymer composites has been growing since the late 1990s. Due to high demand, there has been a shift towards ‘green concept’ material in many applications. Numerous secondary plant fibers have been explored as a source...
Existing strategies and policies have emphasized the need for cross-sector collaboration as a means for the forest sector to be more competitive. Cross-sector collaboration initiatives of forest sector companies with neighboring industries such as energy, chemicals, plastics, textiles, and packaging are gaining increasing attention as a necessary element for a...
In recent years, multiple historic and contemporary timber buildings have been instrumented with sensors to monitor the performance of wood products and novel engineering systems. While literature states the potential of structural health monitoring (SHM) data to inform decision-making process of key stakeholders in the architects, engineers, contractors and manufacturers...
The objective of this study was to investigate load paths in an existing light-frame wood structure with complex geometry, using previously established computer modeling methods. The structural model is derived from an existing, multi-level residence located in Corvallis, Oregon. For the purpose of this study, the existing structure was simplified...
Cross-laminated timber (CLT) panels have been gaining popularity as diaphragm elements in mid- to high-rise construction projects. In addition, CLT-concrete composite (CCC) diaphragms have been implemented to expand the use of CLT diaphragms. To understand the behavior of CLT and CCC diaphragms, this research effort sought to characterize the cyclic,...
Cross-Laminated Timber (CLT) is one of the latest engineered wood products to show promising structural features for a variety of structural purposes including resisting lateral loads. For CLT to be widely adopted, its modal behavior needs to be fully evaluated through experimental and numerical methods. It is important to the...
The sustainable use of wood for rail ties requires chemical treatment to increase service life and maintain structural integrity. Treatment can only be applied after lengthy air-seasoning to reduce moisture content in wood, but seasoning leaves ties exposed to attack by decay fungi for up to a year. One factor...
Wood plays a key role in modern electrical infrastructure; crossarms and power poles utilize the high strength to weight ratio, availability and low cost of wood to facilitate the access of power to millions of Americans. However, wood presents a variety of challenges as a material. In structural applications, one...
Connections in mass timber structural systems dissipate energy and transfer lateral forces from mass timber elements such as shear walls and diaphragms, providing critical load paths. Cross-laminated timber (CLT) is a prominent mass timber material used to manufacture wall and floor assemblies. Fire performance research of CLT walls and floors...
The global Cross-Laminated Timber (CLT) industry has changed dramatically within the past decade, with expansion outside of its start in Alpine Europe. The societal focus on more sustainable options within the built environment has led to an increased use of mass timber construction and its products including cross-laminated timber. Examining...
Timber engineering is currently in the midst of a significant evolution due to the rise of mass timber products, like cross-laminated timber (CLT). Increasing numbers of structural engineers are facing the challenge of designing lateral-force-resisting systems (LFRS) for multistory CLT structures. LFRS solutions such as steel frames, concrete cores, or...
Fungi from the genus Chlorociboria are known for their production of the blue-green quinonic pigment xylindein. Extracted xylindein has been the subject of investigations ranging from fabric dying to use a coloring agent in paint, and shows potential as an organic semiconductor in organic photovoltaics (OPVs) and other technologies. However,...
Wood-based composites such as plywood and particleboard are produced with a thermoset adhesive via a hot-press process. At present, UF is the most commonly used thermoset adhesive for production of decorative plywood. The emission of the carcinogenic formaldehyde from UF-bonded panels during the use of panels affects the indoor air...
Natural dyes have been used to color textiles for centuries, but with the shift to mass production, the use of synthetic dyes has increased due to their lower cost and easy manufacturing volume. However, synthetic dyes (such as disperse blue dyes 106 and 124) have been reported to cause skin...
Natural durability remains one of the most attractive characteristics of wood, and helps wood obtain a premium price. A worldwide shift towards the use of younger trees from intensively managed forests has created greater concerns about wood quality, especially the wood’s resistance to fungi and insects. Wood durability is assessed...
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
The majority of low-rise residential structures in the U.S. are constructed with wood. Wood-based composites are primary building materials in these structures, used as structural sheathing, joists, and beam components. Wood composites are susceptible to degradation upon exposure to high levels of moisture. Moisture durability is routinely assessed with accelerated...
Cross laminated timber (CLT) is a relatively new engineered wood product that has elevated the prospects of utilizing wood as the primary structural material for mid and high rise buildings. The hygrothermal performance of CLT, however, is still not well understood at the material, assembly and building scales. A major...
In the last few decades new trends and innovations in wood products have emerged that are changing the way we can use this material in buildings. Additionally, wood is a material that has been touted to have many positive attributes in comparison to nonrenewable construction materials such as steel and...
Wood-staining fungal pigments have potential uses as colorants for wood and textiles. Traditionally, organic solvents have been used as carriers for these pigments. However, other environmentally-friendly and more readily available carriers must be found. Natural oils have the potential to carry these pigments but have demonstrated color loss over relatively...
Small hairline cracks called checks in the decorative face veneer of hardwood plywood are a costly problem for the hardwood plywood industry. Hardwood plywood describes any plywood sheet with a hardwood face veneer glued onto a core substrate. Checks form due to differential shrinkage stresses. Not all hardwood plywood panels...
During the 1400s – 1600s, spalted wood was an expensive commodity used in marquetry style artworks across primarily Germany and Italy. It fell out of favor during the Industrial Revolution, but is currently experiencing resurgence in popularity with US woodturners. How spalted wood is used, and what types of spalted...
There is a lack of fundamental knowledge about the role which adhesive flow and infiltration plays in the micro-mechanical performance of wood adhesive bonds. This data set, for the first time, provides a way to study directly the relationship between adhesive flow and the micro-mechanics of wood adhesive bonds.
Specimens...
Fungi are the primary biological agents of wood deterioration and cause major economic losses of wood products globally. Wood in outdoor applications tends to remain wet for extended time periods, making it susceptible to fungal attack. Understanding the factors involved in fungal colonization of wood is important for developing improved...
Each year the United States: Forest Service (USFS) spends billions of dollars fighting forest fires. One strategy used by the USFS to prevent catastrophic fires is through forest restoration programs, in which potential forest fuel is removed through mechanized thinning. This program is expensive and generates high volumes of small-diameter...
There are over 130 million wood poles supporting electrical transmission and distribution lines in the U.S. The vast majority of these poles are preservative treated to prolong their useful life. In some cases, however, the depth of treatment is relatively shallow, leaving a deep zone of moderately durable, untreated heartwood....
Untreated wood is inherently hygroscopic and moisture content variations can have substantial effects on dimensional stability leading to the development of deep surface checks that further enhance moisture uptake and ultimately encourage deterioration. The horizontal exposure of wood crossties makes water repellency and dimensional stability particularly important in railroad applications....
CLT is becoming global. New countries and regions increasingly realize the potential of what can be done with CLT. As a result, new markets are forming and new companies are entering the industry. Every new region or country that opens its doors to CLT has its own challenges and opportunities....
Parcellization of the rural landscape threatens the provision of social, ecological and economic benefits to society due to loss of economies of scale. A continued provision requires new approaches to forest management for multiple, interconnected goals. I used interviews, archival records and field measurements to learn how select, experienced owners...
Organizations are significantly influenced by corporate cultures of the interacting organizations. Both the construction industry and engineered wood products (EWP) manufacturing industry are generally known for operating in a traditional environment maintaining conservative corporate cultures, which can create friction when they try to interact with a more liberal architectural industry...
This work is a culmination of a series of published works related to the use of the Material Point Method (MPM) in modeling wood adhesive bonds. The use of wood as construction material has the potential to play a small role in the solution to the current CO2 and climate...
One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...
Commercial methodologies for producing fungal pigments are of worldwide interest due to the desire to move away from synthetic dyes. Chlorociboria species and Scytalidium species have been reported to produce sufficient yields of pigments for commercial production and have attracted special attention because of their use in spalted wood applications....
Today nano scale materials are being used for wide range of applications. One promising topic in nano scale materials is using them for reinforcement of different polymeric materials to reach desirable stiffness properties. The stiffness of these materials is mostly found experimentally because the nanocomposite community lacks a decent analytical...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
The objective of this study was to compare structural load path and system behavior of a light-frame (LF) and a timber frame (TF) structure. This load path analysis is part of a broader research effort that compares LF to TF residential structures. Structural analysis software was used to create a...
Ten full-size (3.7×4.9m) plywood roof diaphragms were constructed using metal-plate-connected (MPC) common and hip wood trusses or joists, typical of single-family dwelling (SFD) construction. The specimens included three gable roof slopes of 33, 67, and 100%, a hip roof of 33% slope, and a flat roof, with a horizontal bottom...
The construction industry has relied heavily on wood and wood-based composites, such as oriented strand board (OSB) and plywood for timber frame construction. Therefore, it is highly imperative to categorize the response of wood-based composites when exposed to elevated temperatures for a sustained period of time. The essence of fire-resistant...
Seismic design of wood-frame single-family dwellings’ (WFSFD) lateral force–resisting systems requires determination of the stiffness of horizontal diaphragms and shearwalls. During design, sizes and locations of shearwall openings are often changed, altering shearwall stiffness and loads and requiring a significant redesign effort. Rigid and tributary area method analyses are examined...
This study investigated the effect of exposure to elevated temperature on the yield strength of single-shear nail connections when subjected to lateral loading. Solid sawn lumber and laminated veneer lumber were used as framing members and two different thicknesses of both oriented strand board and plywood were used as the...
This paper highlights the development of a rapid visual screening (RVS) tool to quickly identify, inventory, and rank residential buildings that are potentially seismically hazardous, focusing on single-family, wood-frame dwellings with plan irregularity. The SAPWood software was used to perform a series of nonlinear time-history analyses for 480 representative models,...
This study investigates the applicability of the database-assisted design (DAD) methodology to predict structural reactions in a light-framed wood structure subjected to fluctuating wind pressures. Structural influence functions were determined on a 1/3-scale light-frame wood structure, which was then subjected to a wind flow, while the surface pressures and structural...
The assessment of losses during extreme events such as hurricanes is important for performance-based design of residential buildings. In this paper, a methodology for estimating the probability of debris impact, specifically roof sheathing panels, to windows as a result of hurricanes is introduced and applied to a series of illustrative...
The United States spends about $2 billion each year fighting wildfires. While it is a costly operation, mechanized thinning of dense federal forests is one preventative strategy that generates high volumes of small logs. These small logs are often used for wood chips, pulp, or biomass because of the high...
Western juniper (Juniperus occidentalis) is a conifer that is native to Oregon, California, Washington, Nevada, and Idaho. Juniper is known to have highly decay resistant heartwood and is a popular choice for finished furniture. With recent forest management practices over the past 100 years have resulted in an immense population...
Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Spalting fungi show strong potential as natural colorants on a variety of materials, specifically textiles and wood. Four species of spalting fungi are currently utilized in this manner: Scytalidium cuboideum, which produces a red pigment called draconin red, Scytalidium ganodermophthorum, that produces an unknown yellow pigment, and Chlorociboria aeruginosa and...
In the residential sector, wood is the predominant construction material. In the commercial sector and in mid‐rise construction, the use of wood is limited because of a multitude of reasons, including building code restrictions, the perception of wood as a structural material, fire code requirements, and lack of knowledge and...
Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
Boron and boron compounds have been long used for pressure treatment, dip-diffusion, and remedial treatments of wood because of their proven efficacy against fungi and insects. These materials are especially attractive because their high water solubility promotes deeper penetration into wood. Other useful properties of boron include its neutral pH,...
The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
Most of existing commercial unsaturated polyester (UPE) resins are typically composed of a UPE and a high amount of highly volatile, flammable, and toxic styrene. The emission of hazardous styrene in the handling of the UPE resins and the preparation and use of fiber-reinforced UPE composites poses severe hazards to...
As the forest industry moves toward the use of younger trees and production of an increasing number of composite products improving durability has gained importance. Coatings are one of the most widely used methods for improving wood durability because they improve resistance to water penetration, and subsequent shrinking and swelling,...
Many wood composites are known to poorly resist the effects of moisture and temperature extremes over time. Degradation of adhesive bonds, irreversible thickness swell and dimensional instability result in a decrease of properties and a possible failure of the material. Accelerated weathering has become an essential tool for assessment of...
A Life Cycle Assessment (LCA) of the production of poplar biomass grown under four management conditions in the Pacific Northwest (PNW) of the U.S.A. was conducted. While the extraction of fossil fuels and the subsequent generation of energy have environmental impacts, the alternative of extracting poplar biomass also has impacts...
Many nondestructive techniques for structural health monitoring are subjective and based on visual observations of degradation. In addition, dynamic properties of structures are already used to obtain quantitative structural health data. However, most current data collection is limited to localized damage on the structure, rather than global response. Recent research...
Small landowners in the state of Oregon find it difficult to be competitive with larger companies to provide traditional forest products to consumers. Additionally, many landowners hope to be profitable from their land, but are not necessarily interested in or have the capability to harvest large tracts of timber. Specialty...
Sandwich composites are typically produced from two high strength facings bonded to a lower strength, lightweight core. Sandwich design has proven to be efficient for applications demanding high strength and low weight. Wood-based sandwich composites have been largely limited to non-structural applications with the exception of structural insulated panels and...
The ecosystem services provided by our forest resources and woodlands are multiple and diverse on all spatial and temporal levels, and include provision, regulating, cultural, and supporting services (Hanson, et al. WRI, 2008). Human activities are proximate and direct drivers of deforestation and forest degradation. In the Latin American region,...
With the resurgence in the interest of using natural textile dyes, a solution must be found that will overcome the limitations of traditional natural dyes. This solution must also be safer for both humankind and the environment than are synthetic dyes. This study compares the colorfastness of commercially available synthetic...
Architects and engineers are two key types of design professionals who influence the use of wood products in construction. Eighty to ninety percent by volume of all residential structures in the U.S. are wood (Gupta, 2005). In 2010, the non-residential market was made up by 10% wood, 60% steel and...
Phytophthora ramorum is a plant pathogen that was accidentally introduced to the United States. This invasive microorganism has killed over a million trees in California and Oregon, and continues to spread to new areas. Diseased areas have been nationally quarantined to prevent further spread and more than ninety countries include...
Resistance to moisture uptake is an important attribute of some wood preservatives and can help reduce moisture cycling that leads to the development of deep checks. While the potential for preservative treatments to help improve wood/moisture interactions is acknowledged, there are no tests that specifically evaluate this performance parameter. Checking...
In the forest products business and management literature, one common categorization of different types of innovation is product innovation, process innovation and business systems innovation. Forest products companies have long placed high emphasis on process innovations, which are related to yield maximization, manufacturing efficiency and operating costs reduction. This is...
The mechanical performance of composite materials is determined by the mechanical properties of their individual components and the effective load transfer between these components. Binders are commonly used to bond composite components together and to provide effective load transfer between them. In wood-based composites the binder-component load transfer occurs at...
Plywood is the second largest, by value, wood-based product being imported by United Arab Emirates (UAE), below paper products and also second in terms of volume below sawn wood. Very few studies have been done of the UAE market for plywood. This thesis takes a scientific, marketing planning approach to...
Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
There is no doubt that adhesive penetration plays an important role in wood bondline joint performance and durability; yet, to date there is no direct experimental evidence linking penetration depth with bond performance. This is, in part, because adhesive penetration is commonly assessed with various 2D microscopy techniques that are...
Existing pressure sensitive adhesives (PSAs) are mostly based on petrochemicals. In this study, a novel PSA based on a renewable material, methyl oleate, was prepared and characterized. Methyl oleate was first epoxidized to form epoxidized methyl oleate that was subsequently hydrolyzed and acidified to form epoxidized oleic acid (EOA) which...
Abstract: Three novel curing agents ( I , II , and III) were synthesized
from epichlorohydrin and ammonium hydroxide.
The combinations of soy flour (SF) with one of the curing
agents (SF- I , SF- II , and SF- III ) were investigated as adhesives
for making interior plywood. Water...
Copper is the most common ingredient in waterborne preservatives and provides excellent activity against most fungi and insects. However, issues associated with copper migration from treated wood have created increasing concerns about potential risks to non-target organisms in surrounding environments, especially those in sensitive aquatic environments. Various Best Management Practices...
There are about 80 million single-family dwellings (SFD) in the United States, predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all SFD in...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
As oriented strand board (OSB) increases in use as an engineered wood product, improving the in-plane shear properties will allow more efficient use of the material as well as open up other opportunities for OSB to be used in engineered wood products with high shear stresses. Based on classical laminated...
Visual appeal of wood is as important as its
structural integrity in outdoor applications. Discoloration
and checking of wood favor the utilization of alternative
materials for outdoor cladding and decking. Lignin depolymerization
is one of the critical processes leading to
weathering. In the present paper, the potential of different
classes...
In this article, we present cradle-to-gate life-cycle inventory (LCI) data for wood fuel pellets manufactured in the Southeast United States. We surveyed commercial pellet manufacturers in 2010, collecting annual production data for 2009. Weighted-average inputs to, and emissions from, the pelletization process were determined. The pellet making unit process was...
Paleoclimate proxies based on the measurement of xylem cell anatomy have rarely been developed across the temperature range of a species or applied to wood predating the most recent millennium. Here we describe wood anatomy-based proxies for spring temperatures in central North America from modern bur oaks (Quercus macrocarpa Michx.)....
Face checking in decorative maple veneered plywood panels is a significant
problem for hardwood plywood manufacturers, furniture makers, cabinetmakers, and consumers. Efforts made by panel producers and researchers to minimize checking conducted to-‐date have been limited, and produced contradictory results. In this study the impact of four manufacturing factors believed...
In the summer of 2009, a full-scale midrise wood-frame building was tested under a series of simulated earthquakes on the world's largest shake table in Miki City, Japan. The objective of this series of tests was to validate a performance-based seismic design approach by qualitatively and quantitatively examining the building's...
The assessment of losses during extreme events such as hurricanes is important for performance-based design of residential buildings. In this paper, a methodology for estimating the risk of debris impact, specifically roof sheathing panels, to windows as a result of hurricanes is introduced and applied to an illustrative example. The...
The specification, inspection, and remedial treatment of utility poles are addressed. Included are discussions of enhancing specifications for improved performance, techniques for detecting decay and other defects, and chemical treatments available for arresting decay of poles in service.
The goal was to determine local mechanical properties inside of oriented strand board (OSB) based on a realistic morphology-based finite element (FE) model and data acquired from a physical test performed on the same material. The spatial information and local grayscale intensity from CT-scans obtained from small OSB sample was...
This paper highlights the development of a rapid visual screening (RVS) tool to quickly identify, inventory, and rank residential buildings that are potentially seismically hazardous, focusing on single-family, wood-frame dwellings with plan irregularity. The SAPWood software was used to perform a series of nonlinear time-history analyses for 480 representative models,...
Western juniper and cinnamon essential oils were combined with ethanol at 2.5, 5, and 10% concentrations by weight and applied to hybrid poplar (Populus trichocarpa x P. deltoids) veneers by vacuum soaking to produce a naturally durable wood veneer with increased mechanical properties for use in structural composites. Half of...
The objective of this study was to develop and validate practical modeling
methods for investigating load paths and system behavior in a realistic, light-frame wood
structure. The modeling methods were validated against full-scale tests on subassemblies
and an L-shaped house. The model of the L-shaped house was then modified
and...
The wood products industry is influenced heavily by family ownership along the entire value chain. Although family ownership affects each link of the wood products value chain, there has been little research into the importance of products originating from family forestland. Specific attributes of products, such as origin or environmental...
Natural fibers are gaining popularity as reinforcement materials for thermoset resins over the last two decades. Natural fibers are inexpensive, abundant, renewable and environmentally friendly. Kenaf fibers are one of the natural fibers that can potentially be used for reinforcing unsaturated polyester (UPE). As a polymer matrix, UPE enjoys a...
The fixed bed drying of western hemlock and Douglas-fir biomass particles at temperatures ranging from 50°C to 200°C and air velocities from 0.3 to 0.9 m/s was investigated. The objectives were to describe the drying characteristics of the particles, fit a model for thin-layer drying, and develop and test a...
The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
Innovation is a critical component for long term success of an organization. However, being innovative is rarely easy. Successful implementation of any innovation (product, process, or business system) can heavily rely on the functionality of the current innovation system in a given industry. An innovation system is composed of policies,...
The purpose of this thesis was to evaluate orthogonal cutting as a method to determine the fracture toughness of low and high density polyethylene and wood plastic composites. A test fixture was developed to capture normal and tangential cutting forces at variable depth and rake angle. A tool interface method...
During the past several decades, earthquakes have caused extensive damage to
buildings, including wood-frame, single-family dwellings, in the United States. In
order to mitigate future losses, existing buildings in earthquake prone areas should be
evaluated for their seismic safety. This is also an important issue for buildings in
Oregon due...
Since 2004 there have been multiple devastating tsunamis around the globe triggered by large magnitude earthquakes; with the most recent being the Tohoku, Japan tsunami in March 2011. These tsunamis have caused significant loss of life and damage to the coastal communities impacted by these powerful waves. The resulting devastation...
Logging and forest thinning operations generate large amounts of residues in the form of small trees, branches and foliage that are usually left on the ground to decay or are burned. These resources are readily available, but it is uneconomical to remove them from the forest. The potential utilization of...
The wood-based building products industry has experienced significant turbulence over the past several decades as a function of multiple forces including among others globalization, product and process innovation, and shifting customer and consumer interest and demands. Collectively, these changes have challenged the historical tenets which have defined industry strategy and...
Polymeric composites reinforced with bio-materials have advantages over composites with synthetic reinforcements. Bio-based composites use low-cost and renewable reinforcements, have nonabrasive properties for machining, have improved damping characteristics, and have potential for energy recycling. However, the limited use of bio-based composites is because their mechanical properties are typically much lower...