Mass timber (MT) offers viable eco-conscious solutions within the building industry, with its high strength ratings, dimensional stability, light weight and renewable nature enhancing its status as a low carbon alternative to conventional building materials like steel and concrete. Moisture intrusion, coupled with the inherent organic nature of wood pose...
The engineering community is increasingly moving towards the design of seismic force-resisting systems that limit post-earthquake damage and reduce downtime to increase urban resiliency. For example, structural spines can be used to provide an elastic load path to impose a more uniform drift distribution with building height, thereby reducing the...
This thesis focuses on the fundamental behavior of CLT floor-to-wall connections during a fire.
Cross-laminated timber (CLT) panelized structures rely on floor-to-wall connections for the load path and stability of the structure. Additionally, the fire performance of these connections is critical to prevent horizontal or vertical fire spread within these...
This thesis consists of three manuscripts related to the methodology of evaluating charring behavior in cross laminated lumber panel specimens subjected to fire performance tests on cross-laminated lumber panel specimens. The topic of the first manuscript is the measurement of char rates of unprotected CLT layups fabricated with ponderosa pine...
Includes Partial Least Squares Regression and Univariate Linear model RStudio code and results in PDF form for each of the three specimen populations scanned by two different light sources. Also included is a generalized PDF document and RMarkdown document for predicting percent wood failure.
Structural engineered wood manufacturers need a quantitative measurement technique to determine the ratio of wood to adhesive failure in their shear specimens. Visual estimation of percent wood failure has long stood as an extremely subjective quality control approach according to ASTM D5266 – Standard Practice for Estimating the Percentage of...
Conflicts and disasters displace millions of populations worldwide. There is a need for rapid and affordable housing to cater to the needs of the displaced and unhoused population. Experience from previous post-disaster responses shows that temporary housing should be rapidly deployable, planned for months to years, and should be environmentally...
In the search to improve and incorporate nano and renewable materials into urea-formaldehyde (UF), several researchers have incorporated cellulose nano fibrillated (CNF) into the adhesive. This study aimed to find an optimal way of incorporating CNF into UF and understand how CNF interacts with and changes the properties of the...
Restoration programs effectively prevent or mitigate wildfires and pest outbreaks in the forest lands. The most common approach is to selectively harvest smaller and dead trees in order to preserve larger and superior trees. Ponderosa pine, Pinus ponderosa, (PP) lumber is one of the common species harvested from restoration programs...
With growing interest in mass timber, especially mass timber panels (MTP), there has been a need to better understand their structural properties. One of the most versatile uses for MTP are as floor systems. Under new code provisions, these floors can be utilized in new and taller building types, but...
Post-tensioned (PT) self-centering shear walls were designed to reduce structural damage from seismic activity. However, these lateral force resistant systems experience post-tension loss negatively affecting the re-centering capability due to delayed deformations experienced by engineered wood products over time. The long-term mechanical response of mass-timber panels to in-plane PT loads...
Timber-concrete composite (TCC) solutions originated in the early twentieth century. There has been a renewed interest in TCC solutions in modern mass timber buildings, especially for floor systems. However due to lack of data, design standards, and code acceptance, TCC solutions require that new mass timber solutions be tested, and...
Spraying of liquid adhesive onto wood surfaces has shown to be a highly effective and efficient method of application across many different wood-based composite industries. However, the dynamics of spraying are extremely variable and distribution can be affected by liquid properties (rheology, molecular weight distribution, and temperature), application parameters (disk...
Civil engineers are aware of the impacts of structures on the global environment but the environmental impacts of a fire within these structures remains unknown. Fires present a unique hazard as it is difficult to predict the probability of the occurrence and the intensity. Traditional methods to identify the environmental...
Forest composition in Paraguay has been in a state of change for the past half century due to land management practices, forest fragmentation, and deforestation for agriculture. How these factors affect dendrological diversity and wood anatomy in Paraguay is not well understood. This thesis documents Paraguayan forest composition on the...
As a new product patented by Freres Lumber Company in 2018, little information exists for manu-facturing procedures of mass plywood panels (MPP). At first glance, MPP may appear to be ply-wood, laminated veneer lumber (LVL), or similar to conventional cross-laminated timber (CLT). Often manufacturers, as well as users, of MPP...
Equipment and technology suppliers to the US forest sector are confronting challenges and opportunities to meet the need for disruptive changes in an increasingly complex business environment. Open innovation is crucial for survival and success in the complex and changing operational environment due to its inherent openness and interdisciplinary nature....
Generally presented as a preferred social norm based on both ethical considerations and legislative demands, gender equality has been highly encouraged in recent years. For instance, The United Nations Sustainable Development Goals for 2030 call out achieving gender equality and empowerment of women. However, although there are multiple efforts to...
This paper discusses elementary, and secondary (K-12) teachers’ perceptions of cross-reality (XR) tools for data visualization and use of sensor data from the built environment in classroom curricula. Our objective was to explore the use of sensor-informed XR in the built environment and civil engineering (BECE) field to support K-12...
Accelerated weathering (AW) tests have become a requirement for many wood composite products. This project monitored temperature and moisture content of specimens undergoing AW exposure for the following standards: ASTM D3434 (automatic boil test), CSA O112.9 (boil-dry-freeze), and PS2 (Section 7.17, 6-cycle VPS). Each AW procedure was conducted with three...
Wood-based composites (WBCs) are an important sector of the US economy. For a WBC product to succeed, understanding its long-term durability, including seasonal variations in temperature and humidity, is critical. Durability is especially important WBCs because they are predominantly made from wood, which is a biological, hygroscopic material that is...
Cross-laminated timber (CLT) is revolutionizing the use of wood in the construction sector of North America as a solution for walls and diaphragms in mid-rise or even high-rise timber structures on account of its environmental advantages, high strength-to-weight ratio, fire-safety performance, and propensity for prefabrication. However, considering the hygroscopic nature...
Timber-concrete composite (TCC) floors have improved strength and stiffness when compared to timber-only floors, allowing for longer spans in buildings and improved life safety. However, North America does not have codes and standards that recognize TCC floors, particularly the improved life safety performance of these floors in fire. Therefore, alternate...
Dimensional stability of wood-based composites with changing moisture content remains an important challenge in the industry for many applications. Wood modification technologies have shown significant improvement in dimensional stability by altering the chemistry of the wood substrate, or by filling the available space in the wood microstructure that otherwise would...
Although there are continuous efforts aimed at increasing gender diversity, the forest sector is still largely perceived as a male dominated field, indicated by a persistent masculine image. As a result, women are still underrepresented. Utilizing interviews, we found that greater representation of women in the forest sector is considered...
As mass-timber building construction rises around the globe, there exists the need to verify the long-term, in-situ behavior and performance of these structural systems. Structural health monitoring (SHM), generally defined as a damage detection strategy consisting of a network of sensors, a data acquisition system, and algorithms for data analysis,...
The United States generates over 70 million tonnes of wood waste annually, with over 27 million tonnes still available for recovery. Current recycling rates for wood waste are in the range of 10% to 15%, which is much lower than other common building materials and indicative of an underutilized resource....
Using plant fibers as a potential renewable material to substitute for glass fibers in fiber-reinforced polymer composites has been growing since the late 1990s. Due to high demand, there has been a shift towards ‘green concept’ material in many applications. Numerous secondary plant fibers have been explored as a source...
Existing strategies and policies have emphasized the need for cross-sector collaboration as a means for the forest sector to be more competitive. Cross-sector collaboration initiatives of forest sector companies with neighboring industries such as energy, chemicals, plastics, textiles, and packaging are gaining increasing attention as a necessary element for a...
In recent years, multiple historic and contemporary timber buildings have been instrumented with sensors to monitor the performance of wood products and novel engineering systems. While literature states the potential of structural health monitoring (SHM) data to inform decision-making process of key stakeholders in the architects, engineers, contractors and manufacturers...
The objective of this study was to investigate load paths in an existing light-frame wood structure with complex geometry, using previously established computer modeling methods. The structural model is derived from an existing, multi-level residence located in Corvallis, Oregon. For the purpose of this study, the existing structure was simplified...
Cross-laminated timber (CLT) panels have been gaining popularity as diaphragm elements in mid- to high-rise construction projects. In addition, CLT-concrete composite (CCC) diaphragms have been implemented to expand the use of CLT diaphragms. To understand the behavior of CLT and CCC diaphragms, this research effort sought to characterize the cyclic,...
Cross-Laminated Timber (CLT) is one of the latest engineered wood products to show promising structural features for a variety of structural purposes including resisting lateral loads. For CLT to be widely adopted, its modal behavior needs to be fully evaluated through experimental and numerical methods. It is important to the...
The sustainable use of wood for rail ties requires chemical treatment to increase service life and maintain structural integrity. Treatment can only be applied after lengthy air-seasoning to reduce moisture content in wood, but seasoning leaves ties exposed to attack by decay fungi for up to a year. One factor...
Wood plays a key role in modern electrical infrastructure; crossarms and power poles utilize the high strength to weight ratio, availability and low cost of wood to facilitate the access of power to millions of Americans. However, wood presents a variety of challenges as a material. In structural applications, one...
Connections in mass timber structural systems dissipate energy and transfer lateral forces from mass timber elements such as shear walls and diaphragms, providing critical load paths. Cross-laminated timber (CLT) is a prominent mass timber material used to manufacture wall and floor assemblies. Fire performance research of CLT walls and floors...
The global Cross-Laminated Timber (CLT) industry has changed dramatically within the past decade, with expansion outside of its start in Alpine Europe. The societal focus on more sustainable options within the built environment has led to an increased use of mass timber construction and its products including cross-laminated timber. Examining...
Timber engineering is currently in the midst of a significant evolution due to the rise of mass timber products, like cross-laminated timber (CLT). Increasing numbers of structural engineers are facing the challenge of designing lateral-force-resisting systems (LFRS) for multistory CLT structures. LFRS solutions such as steel frames, concrete cores, or...
Fungi from the genus Chlorociboria are known for their production of the blue-green quinonic pigment xylindein. Extracted xylindein has been the subject of investigations ranging from fabric dying to use a coloring agent in paint, and shows potential as an organic semiconductor in organic photovoltaics (OPVs) and other technologies. However,...
Wood-based composites such as plywood and particleboard are produced with a thermoset adhesive via a hot-press process. At present, UF is the most commonly used thermoset adhesive for production of decorative plywood. The emission of the carcinogenic formaldehyde from UF-bonded panels during the use of panels affects the indoor air...
Natural dyes have been used to color textiles for centuries, but with the shift to mass production, the use of synthetic dyes has increased due to their lower cost and easy manufacturing volume. However, synthetic dyes (such as disperse blue dyes 106 and 124) have been reported to cause skin...
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
The majority of low-rise residential structures in the U.S. are constructed with wood. Wood-based composites are primary building materials in these structures, used as structural sheathing, joists, and beam components. Wood composites are susceptible to degradation upon exposure to high levels of moisture. Moisture durability is routinely assessed with accelerated...
Cross laminated timber (CLT) is a relatively new engineered wood product that has elevated the prospects of utilizing wood as the primary structural material for mid and high rise buildings. The hygrothermal performance of CLT, however, is still not well understood at the material, assembly and building scales. A major...
In the last few decades new trends and innovations in wood products have emerged that are changing the way we can use this material in buildings. Additionally, wood is a material that has been touted to have many positive attributes in comparison to nonrenewable construction materials such as steel and...
Wood-staining fungal pigments have potential uses as colorants for wood and textiles. Traditionally, organic solvents have been used as carriers for these pigments. However, other environmentally-friendly and more readily available carriers must be found. Natural oils have the potential to carry these pigments but have demonstrated color loss over relatively...
Small hairline cracks called checks in the decorative face veneer of hardwood plywood are a costly problem for the hardwood plywood industry. Hardwood plywood describes any plywood sheet with a hardwood face veneer glued onto a core substrate. Checks form due to differential shrinkage stresses. Not all hardwood plywood panels...
During the 1400s – 1600s, spalted wood was an expensive commodity used in marquetry style artworks across primarily Germany and Italy. It fell out of favor during the Industrial Revolution, but is currently experiencing resurgence in popularity with US woodturners. How spalted wood is used, and what types of spalted...
Fungi are the primary biological agents of wood deterioration and cause major economic losses of wood products globally. Wood in outdoor applications tends to remain wet for extended time periods, making it susceptible to fungal attack. Understanding the factors involved in fungal colonization of wood is important for developing improved...
Each year the United States: Forest Service (USFS) spends billions of dollars fighting forest fires. One strategy used by the USFS to prevent catastrophic fires is through forest restoration programs, in which potential forest fuel is removed through mechanized thinning. This program is expensive and generates high volumes of small-diameter...
There are over 130 million wood poles supporting electrical transmission and distribution lines in the U.S. The vast majority of these poles are preservative treated to prolong their useful life. In some cases, however, the depth of treatment is relatively shallow, leaving a deep zone of moderately durable, untreated heartwood....
Untreated wood is inherently hygroscopic and moisture content variations can have substantial effects on dimensional stability leading to the development of deep surface checks that further enhance moisture uptake and ultimately encourage deterioration. The horizontal exposure of wood crossties makes water repellency and dimensional stability particularly important in railroad applications....
CLT is becoming global. New countries and regions increasingly realize the potential of what can be done with CLT. As a result, new markets are forming and new companies are entering the industry. Every new region or country that opens its doors to CLT has its own challenges and opportunities....
Parcellization of the rural landscape threatens the provision of social, ecological and economic benefits to society due to loss of economies of scale. A continued provision requires new approaches to forest management for multiple, interconnected goals. I used interviews, archival records and field measurements to learn how select, experienced owners...
Organizations are significantly influenced by corporate cultures of the interacting organizations. Both the construction industry and engineered wood products (EWP) manufacturing industry are generally known for operating in a traditional environment maintaining conservative corporate cultures, which can create friction when they try to interact with a more liberal architectural industry...
This work is a culmination of a series of published works related to the use of the Material Point Method (MPM) in modeling wood adhesive bonds. The use of wood as construction material has the potential to play a small role in the solution to the current CO2 and climate...
One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...
Commercial methodologies for producing fungal pigments are of worldwide interest due to the desire to move away from synthetic dyes. Chlorociboria species and Scytalidium species have been reported to produce sufficient yields of pigments for commercial production and have attracted special attention because of their use in spalted wood applications....
Today nano scale materials are being used for wide range of applications. One promising topic in nano scale materials is using them for reinforcement of different polymeric materials to reach desirable stiffness properties. The stiffness of these materials is mostly found experimentally because the nanocomposite community lacks a decent analytical...
Many publications, documents, codes and guidelines exist related to the seismic evaluation and rehabilitation design of existing buildings. This report discusses the assumptions and methods employed for investigation of two wood structures using four references: FEMA 154, FEMA 356, ASCEI per SEI 31, and 1997 UBC. The screening performed using...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
The objective of this study was to compare structural load path and system behavior of a light-frame (LF) and a timber frame (TF) structure. This load path analysis is part of a broader research effort that compares LF to TF residential structures. Structural analysis software was used to create a...
Seismic design of wood-frame single-family dwellings’ (WFSFD) lateral force–resisting systems requires determination of the stiffness of horizontal diaphragms and shearwalls. During design, sizes and locations of shearwall openings are often changed, altering shearwall stiffness and loads and requiring a significant redesign effort. Rigid and tributary area method analyses are examined...
This study investigates the applicability of the database-assisted design (DAD) methodology to predict structural reactions in a light-framed wood structure subjected to fluctuating wind pressures. Structural influence functions were determined on a 1/3-scale light-frame wood structure, which was then subjected to a wind flow, while the surface pressures and structural...
The assessment of losses during extreme events such as hurricanes is important for performance-based design of residential buildings. In this paper, a methodology for estimating the probability of debris impact, specifically roof sheathing panels, to windows as a result of hurricanes is introduced and applied to a series of illustrative...
The United States spends about $2 billion each year fighting wildfires. While it is a costly operation, mechanized thinning of dense federal forests is one preventative strategy that generates high volumes of small logs. These small logs are often used for wood chips, pulp, or biomass because of the high...
Western juniper (Juniperus occidentalis) is a conifer that is native to Oregon, California, Washington, Nevada, and Idaho. Juniper is known to have highly decay resistant heartwood and is a popular choice for finished furniture. With recent forest management practices over the past 100 years have resulted in an immense population...
Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Spalting fungi show strong potential as natural colorants on a variety of materials, specifically textiles and wood. Four species of spalting fungi are currently utilized in this manner: Scytalidium cuboideum, which produces a red pigment called draconin red, Scytalidium ganodermophthorum, that produces an unknown yellow pigment, and Chlorociboria aeruginosa and...
In the residential sector, wood is the predominant construction material. In the commercial sector and in mid‐rise construction, the use of wood is limited because of a multitude of reasons, including building code restrictions, the perception of wood as a structural material, fire code requirements, and lack of knowledge and...
Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
Boron and boron compounds have been long used for pressure treatment, dip-diffusion, and remedial treatments of wood because of their proven efficacy against fungi and insects. These materials are especially attractive because their high water solubility promotes deeper penetration into wood. Other useful properties of boron include its neutral pH,...
The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
Most of existing commercial unsaturated polyester (UPE) resins are typically composed of a UPE and a high amount of highly volatile, flammable, and toxic styrene. The emission of hazardous styrene in the handling of the UPE resins and the preparation and use of fiber-reinforced UPE composites poses severe hazards to...
As the forest industry moves toward the use of younger trees and production of an increasing number of composite products improving durability has gained importance. Coatings are one of the most widely used methods for improving wood durability because they improve resistance to water penetration, and subsequent shrinking and swelling,...
Many wood composites are known to poorly resist the effects of moisture and temperature extremes over time. Degradation of adhesive bonds, irreversible thickness swell and dimensional instability result in a decrease of properties and a possible failure of the material. Accelerated weathering has become an essential tool for assessment of...
A Life Cycle Assessment (LCA) of the production of poplar biomass grown under four management conditions in the Pacific Northwest (PNW) of the U.S.A. was conducted. While the extraction of fossil fuels and the subsequent generation of energy have environmental impacts, the alternative of extracting poplar biomass also has impacts...
Many nondestructive techniques for structural health monitoring are subjective and based on visual observations of degradation. In addition, dynamic properties of structures are already used to obtain quantitative structural health data. However, most current data collection is limited to localized damage on the structure, rather than global response. Recent research...
Small landowners in the state of Oregon find it difficult to be competitive with larger companies to provide traditional forest products to consumers. Additionally, many landowners hope to be profitable from their land, but are not necessarily interested in or have the capability to harvest large tracts of timber. Specialty...
Sandwich composites are typically produced from two high strength facings bonded to a lower strength, lightweight core. Sandwich design has proven to be efficient for applications demanding high strength and low weight. Wood-based sandwich composites have been largely limited to non-structural applications with the exception of structural insulated panels and...
The ecosystem services provided by our forest resources and woodlands are multiple and diverse on all spatial and temporal levels, and include provision, regulating, cultural, and supporting services (Hanson, et al. WRI, 2008). Human activities are proximate and direct drivers of deforestation and forest degradation. In the Latin American region,...
With the resurgence in the interest of using natural textile dyes, a solution must be found that will overcome the limitations of traditional natural dyes. This solution must also be safer for both humankind and the environment than are synthetic dyes. This study compares the colorfastness of commercially available synthetic...
Architects and engineers are two key types of design professionals who influence the use of wood products in construction. Eighty to ninety percent by volume of all residential structures in the U.S. are wood (Gupta, 2005). In 2010, the non-residential market was made up by 10% wood, 60% steel and...
Phytophthora ramorum is a plant pathogen that was accidentally introduced to the United States. This invasive microorganism has killed over a million trees in California and Oregon, and continues to spread to new areas. Diseased areas have been nationally quarantined to prevent further spread and more than ninety countries include...
Resistance to moisture uptake is an important attribute of some wood preservatives and can help reduce moisture cycling that leads to the development of deep checks. While the potential for preservative treatments to help improve wood/moisture interactions is acknowledged, there are no tests that specifically evaluate this performance parameter. Checking...
In the forest products business and management literature, one common categorization of different types of innovation is product innovation, process innovation and business systems innovation. Forest products companies have long placed high emphasis on process innovations, which are related to yield maximization, manufacturing efficiency and operating costs reduction. This is...
The mechanical performance of composite materials is determined by the mechanical properties of their individual components and the effective load transfer between these components. Binders are commonly used to bond composite components together and to provide effective load transfer between them. In wood-based composites the binder-component load transfer occurs at...
Plywood is the second largest, by value, wood-based product being imported by United Arab Emirates (UAE), below paper products and also second in terms of volume below sawn wood. Very few studies have been done of the UAE market for plywood. This thesis takes a scientific, marketing planning approach to...
Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
There is no doubt that adhesive penetration plays an important role in wood bondline joint performance and durability; yet, to date there is no direct experimental evidence linking penetration depth with bond performance. This is, in part, because adhesive penetration is commonly assessed with various 2D microscopy techniques that are...
Existing pressure sensitive adhesives (PSAs) are mostly based on petrochemicals. In this study, a novel PSA based on a renewable material, methyl oleate, was prepared and characterized. Methyl oleate was first epoxidized to form epoxidized methyl oleate that was subsequently hydrolyzed and acidified to form epoxidized oleic acid (EOA) which...
Copper is the most common ingredient in waterborne preservatives and provides excellent activity against most fungi and insects. However, issues associated with copper migration from treated wood have created increasing concerns about potential risks to non-target organisms in surrounding environments, especially those in sensitive aquatic environments. Various Best Management Practices...
There are about 80 million single-family dwellings (SFD) in the United States, predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all SFD in...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
As oriented strand board (OSB) increases in use as an engineered wood product, improving the in-plane shear properties will allow more efficient use of the material as well as open up other opportunities for OSB to be used in engineered wood products with high shear stresses. Based on classical laminated...
Face checking in decorative maple veneered plywood panels is a significant
problem for hardwood plywood manufacturers, furniture makers, cabinetmakers, and consumers. Efforts made by panel producers and researchers to minimize checking conducted to-‐date have been limited, and produced contradictory results. In this study the impact of four manufacturing factors believed...