The objectives of this study are: (1) to evaluate the effect of reference
displacement on wall behavior under fully reversed cyclic loading using the
CUREE test protocol and (2) to assess damage accumulation (visible fastener
damage and stiffness degradation) for the imposed drift levels. All tests were
conducted on identical...
Copper is an excellent biocide which has a long history of usage for protecting wood from deterioration, but some organisms have developed tolerance for this chemical. Copper tolerance among wood decay fungi is a poorly understood phenomenon that is gaining importance as cofactors such as arsenic and chromium are removed...
Friction dampers have been used successfully to dissipate seismic
energy in steel and concrete structures. The application is new to timber
structures. The objectives of this research were to design a slotted bolted
connection (SBC) and evaluate its potential as a passive energy damper in
timber brace.
The research was...
Torsion test was evaluated as a method to determine the shear strength
parallel to grain of full-size structural composite lumber (SCL). Experimental
results of eighty-five rectangular (44 x 140 mm²) specimens were verified by finite
element analysis. Laminated strand lumber (LSL), laminated veneer lumber
(LVL) and parallel strand lumber (PSL)...
When Douglas-fir and red alder grow in mixture, interactions between the two species can be competitive, facilitative, or a combination of both over time. A number of factors have recently led to increased interest in managing these two species together for commercial production, and ongoing investigations are yielding important information...
Wood adhesives are essential components of wood composites. At
present, the commonly used wood adhesives, phenol-formaldehyde (PF)
and urea-formaldehyde (UF) resins, are petroleum-based synthetic resins
that may result in emission of formaldehyde in the production and use of
wood composites. Because the world's oil reserves are naturally limited
and formaldehyde...
The objective of this study was to determine the effect of misplaced hold-downs
on the static and cyclic behavior of wood shear walls. Three shear wall
configurations were considered in this study. The first configuration (control) had
hold-downs at the ends of the wall (wall type 1), the second configuration...
This research studied the effects of changing from a traditional manufacturing
system to a cell manufacturing system in a value-added wood products company.
Discrete event simulation was used to describe the current system and the proposed
new systems. Parts were separated into part families that shared similar processing
requirements. From...
Softwood plywood is one of the structural wood products studied in the CORRIM
II effort to document the environmental performance of wood product in residential
structures. Life-cycle inventory (LCI) models were developed to provide performance
data for plywood production by tracking all of its inputs and outputs in a gate-to-gate...
In recent years, log structures have been marketed as an alternative
to conventional light-frame wood structures. Log structures are constructed
using round timbers (or manufactured timbers) that are stacked vertically
and have interlocking corners. Thru-rods and lag screws are used to
provide inter-log connections. This project was conducted to evaluate...
The objective of this study is to complete life cycle inventories (LCI) for laminated veneer lumber (LVL) and composite I-joist (I-joist) production in the two main forest products producing regions in the U.S., the Pacific Northwest (PNW) and Southeast (SE). LVL and I-joists are composite wood building materials that are...
Engineering analysis of heavy timber structures under dynamic loads
is generally lacking. Some literature suggests that heavy timber structures
are stiffer than expected, but popular engineering opinion is to the contrary.
In addition, prior research has shown that passive friction dampers can be
used in timber structures for the intended...
Current lathe technology, smaller diameter logs, smaller core diameters, and
the sale of higher grade veneer for use in engineered wood products are all factors
contributing to plywood manufacturers using rougher veneer with different lathe
check characteristics. When rough veneer is encountered, plywood manufacturers
typically increase the adhesive spread rate...
In investigating wood treatment as a possible processing option for Alaska forest products manufacturers, the double-diffusion method using sodium fluoride followed by a copper sulfate appeared to be the most advantageous approach. Yet, little information was available as to the chemical retention after treating and its resistance to leaching. Green...
The objective of this research is to use a three-dimensional (3D) analysis
method to include 'system effects' directly in the design of light-frame roof truss
assemblies. The goal of this study is to develop an improved and practical method to
determine the structural performance of 3D roof truss assemblies used...
This study examined the relationship of interfacial shear strength (IFSS) and
bending strength (MOR) of several different wood-plastic composites (WPC's).
Plastics utilized were high-density polyethylene (HDPE) and polypropylene (PP).
Pine and oak were used as the wood species. Compatibilizers used included maleicanhydride
polyethylene (MAPE), polymeric methylene diphenyl diisocyanate (PMDI),
KymeneTM,...
Many publications, documents, codes and guidelines exist related to the seismic evaluation and rehabilitation design of existing buildings. This report discusses the assumptions and methods employed for investigation of two wood structures using four references: FEMA 154, FEMA 356, ASCEI per SEI 31, and 1997 UBC. The screening performed using...
Wood remains the most popular material for deck construction. For centuries, consumers have chosen wood because of its desirable qualities and aesthetics. In recent years, wood plastic composites (WPC's) have seen rising demand as alternatives to wood decks, despite a large price premium. In addition, the removal of CCA treated...
Natural fibers such as wood, flax, and hemp are frequently used as fillers in natural fiber-plastic composites (NFPCs). At present, wood fiber is the most commonly used filler in the production of wood-plastic composites (WPCs). The advantages of these fibers compared to conventional inorganic fibers such as glass fiber is...
Innovation is considered the ultimate drive for business success. Fast growing furniture imports from China have become a controversial topic within U.S. wood and furniture industries. Low-cost production, which is stereotypically considered as the major competitive advantage of the Chinese-made products, has received considerable attention by a large body of...
The objectives of this study were to evaluate the performance of wood frame shear walls
under monotonic, cyclic and earthquake loads by: (1) estimating the variability of shear wall
performance, (2) comparing the performance of walls under each loading protocol, (3) evaluating
the effects of anchorage on wall performance, and...
High density polyethylene (HDPE) is a ubiquitous material with versatile properties. It is produced and used in greater volume than any other thermoplastic. HDPE is often filled with a variety of materials for various applications. Glass fiber and wood flour are two common fillers for HDPE. Recently there has been...
In deciduous species, water exits stems mainly through leaf traces
attached to the outer growth ring and yet we know that water ascends
throughout the entire cross-section of the sapwood. There is an increasing
amount of information on sap flow and sapwood hydraulic properties from
separate studies, but little information...
The overall goal of this study is to evaluate the earthquake performance of wood frame
shear walls, and more specifically: (1) to compare the performance differences of fully and
partially anchored walls under monotonic, cyclic, and earthquake loads, (2) to compare wall
performance under earthquake loads with that of standardized...
Many paper products like towel and tissue cannot serve their purposes without temporary wet strength Glyoxal-polyacrylamide (GPA) resin is one of the widely used commercial wet strength additives that impart the temporary wet strength to paper and paperboard products However, GPA resin is derived from petrochemicals and contributes to contaminants...
The dynamics of radio frequency (RF) laminated veneer lumber (LVL) pressing are explored for the purpose of optimizing this process. The RF LVL press at the Albany Trus Joist plant is the focus of this investigation. The investigation first focuses on bond strength development characteristics of the Georgia Pacific adhesive...
Sawmills are very complex systems that involve many manufacturing processes. The variability of their raw material adds further to this complexity as each log has characteristics that determine its processing path. Therefore, computer simulation is a very useful technique for analyzing sawmill performance. This thesis describes a simulation computer model...
A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
Key parts of the lateral force resisting system in wood-frame buildings
are the shearwafls and the connections. The connections in wooden buildings
are the primary source of ductility and energy dissipation; these are essential
properties when buildings are exposed to lateral forces, such as wind and
earthquakes. Shearwall design is...
The goal of this study was to optimize a through-boring pattern that will provide adequate preservative penetration while minimizing the reduction in overall pole bending strength. Hole spacing was developed using longitudinal and transverse chemical penetration data from previous studies. Finite element analysis was used as a preliminary assessment tool...
The emission of organic compounds from wood manufacturing
facilities is an important regulatory concern due to their effects on ambient
air quality. Control technologies, such as oxidizers and biofiltration, are
used to remove organics from air streams; however, most removal
technologies have high costs or cause additional negative environmental
impact....
Current compression perpendicular-to-grain (c-perp) design values for wood members are based on mean stress using the ASTM D143 specimen. Base design value, as determined from 0.04-in deformation in the ASTM specimen, is applied to all c-perp applications. While the standard ASTM test was presumably believed to adequately reflect relevant c-perp...
Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), a shade intolerant species, and western hemlock (Tsuga heterophylla (Raf.) Sarg.), a shade tolerant species, were compared to learn more about the temporal pattern of release from suppression in both species, whether hydraulic architecture or photosynthetic capacity constrain release and how wood functional properties change...
Light-frame construction practices and materials have changed greatly
over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
This study investigated variation in xylem anatomy, hydraulic properties, and the relationship between anatomy and properties within Douglas-fir trees at multiple scales. The hierarchical scales in the study included fertilization treatments (fertilized and unfertilized), trees within the treatments, and positions within the trees. Tracheid diameter, tracheid length, percent latewood, number...
There is a continual interest in developing robust, flexible, durable, lightweight, waterborne polymer barrier coatings which are increasingly resistant towards both chemical warfare agents as well as an ever growing number of toxic industrial chemicals. In this study, barrier films were prepared with poly(vinyl alcohol) (PVOH) and varying amounts of...
Microchannel devices are rapidly evolving process technology with a wide variety of applications. Microchannel devices hold the potential to transform many separation processes. One potential application for such microchannel devices is kidney dialysis. By reducing the size and cost of the device, this technology offers the potential to allow dialysis...
Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
New species introductions have been associated with the movement of
people for thousands of years. For instance, horses were introduced into North
America by Spanish explorers, while pigs were introduced by the Polynesians
into many Pacific islands long before the establishment of permanent
European settlements. Both of these species introductions...
Due to growing global competition, especially in the last decade, the United States wood and wood-based industries have suffered significant market share losses. The wood industry in Germany is facing similar challenges. To stay competitive in an increasingly global marketplace, many wood manufacturers are adopting new management/manufacturing approaches. Lean manufacturing...
The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
Formaldehyde-based adhesives such as urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives dominate the current wood adhesive market. However, these adhesives are derived from petrochemicals and carcinogenic formaldehyde. In this study, we developed two formaldehyde-free adhesives based on abundant, renewable, and inexpensive soy flour (SF).
The first adhesive was mainly composed of...
Copper migration from treated wood has created concerns within the
environmental community because of the potential effects of this heavy
metal on aquatic organisms. Migration can be limited, to some extent, by
more controlled treatments and by post-treatment processing, but these
actions cannot completely overcome the problem. An alternative approach...
A mathematical and then a numerical model were developed for simulating a convective batch lumber drying process. The model incorporates mass and heat transfer relationships within the lumber stack, as well as thermodynamic properties of the wood and drying air. It takes into account a change of air properties along...
The objective of this research project was to increase the density, strength, and stiffness of two low to medium-density diffuse-porous hardwood species. Wood used in this study was processed using a method of wood densification known as “Viscoelastic Thermal Compression” (VTC). The VTC process is a three phase treatment which...
Wood plastic composites (WPCs) are composite materials made from thermoplastic polymers, wood flour, and a small amount of process- and property-enhancing additives; they are principally used in the automotive industry and as secondary building materials. Although the WPC market is expected to keep growing, it is still relatively small when...
While the heartwood of many wood species exhibits excellent resistance to fungal and insect attack, this resistance is sometimes diminished in second-growth material of the same species. The reasons for the reduced durability are unclear, but they may reflect a combination of both higher proportions of sapwood as well as...
The tendency of wood to shrink and swell with changing moisture content remains as one of the most significant challenges to using wood in its many applications. Viscoelastic Thermal Compression (VTC) has been shown to significantly increase the density, strength and stiffness of wood. However, dimensional stability is still a...
The overall goal of this study was to evaluate an alternative to
traditional wood framed shear wall construction. This study introduced the
innovative idea of using a water and seismic damage resistant, wood-concrete-
composite (WCC) construction instead of an all-wood design. The
WCC design consisted of a thin shell of...
The effects of incorporation of selected biocides on physical and mechanical properties of aspen strandboard were assessed using five copper-based preservatives or zinc borate at three retention levels. Tebuconazole or 4,5-dichloro-2-N-octyl-4-isothiazolin-3-one (DCOI) were added as co-biocides to selective copper-based treatments. Mold box tests showed that only panels treated with DCOI...
In many composites, fiber bridging develops as part of the fracture process. Fiber bridging invalidates many toughness evaluation methods such as the ASTM E399 and complicates the identification of crack length, which is a necessary parameter in energy methods. In order to measure the toughness of fiber bridging composites, an...
The goal of this study was to develop an understanding of the nature of surge wave loading on
wood framed residential structures for a variety of building configurations and test conditions.
The objectives of the study were: (1) to measure forces on a 1/6th scale wood framed
residential structure, (2)...
The essential oil components of cedar heartwoods play an important role in the durability of these trees. Yet, the composition of these oils and identity of many of the compounds remains unknown, or incompletely know for some commercially important cedar heartwoods. The essential oil extracts of Alaska Yellow Cedar (Chamaecyparis...
The fundamental intent of the study was to develop an innovative wood-strand composite for use in structural applications. Plantation grown, low density, hybrid poplar was used in the study which was found to be appropriate for the underlying Viscoelastic Thermal Compression (VTC) process. Wood modified by this process has high...
Synthetic adhesives like phenol formaldehyde (PF) and isocyanates dominate the
wood based structural panel market. The raw materials that makeup these adhesives
are based on petroleum and natural gas. The sustainability and the continued success
of the wood based structural panel industry will benefit from the development of
alternative adhesives...
Lead-user research is a relatively new marketing research technique, and it has not seen much use in the forest sector. Lead-user research is designed to capture not just the needs of the customer in their own voice but also to involve actual users of goods and/or services in their development....
Hygro-mechanical effect is a general term applied to all phenomena that involves interaction between moisture content and mechanical characteristics of hygroscopic materials by analogy to thermo-mechanical effects. The hygromechanical effects include (but are not limited to) free shrinkage/swelling, effect of moisture on elastic modulus, strength, creep, failure mechanisms, and mechano...
The fact that 80 percent of Mexican forestlands are under common ownership impacts the competitiveness of the forest products industry and forest sustainability. Community forest enterprises (CFE) are a heterogeneous group of forest industries managed by indigenous and local communities for livelihood and profit. Many CFEs face inner competitiveness problems,...
We studied the feasibility of using end-grain characteristics to match individual boards and cants back to their parent Douglas-fir (Pseudotsuga menziesii) logs. After reviewing marking/reading and biometric automated identification systems, we focused on end-grain biometrics because they appear to have the most promise for sawmills. Biometric identification requires that every...
Corporate social responsibility (CSR) can be defined as companies acting in accordance with societal demands. In recent years, CSR has gradually become a leading issue in business. Heightened corporate attention to CSR has not been entirely voluntary. Many companies awoke to it only after being surprised by public response to...
The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
Formaldehyde-based adhesives such as urea-formaldehyde (UF), phenol-formaldehyde (PF) are widely applied in wood-based composite industry. However, these adhesives are all petrochemical-based and could not sustain in a long term due to a limited reserve of oil and natural gas. Moreover, these adhesives emit carcinogenic formaldehyde in the production or use...
The increasing demand for forest products and restricted use of natural forests has resulted in a shortage of high-strength wood fiber. The area covered by plantation forests is steadily rising, but the fiber produced by these forests is often unsuitable for high-strength applications. One attempt to combat this problem is...
Wildfire prevention operations like forest thinning and forest fuel removal result in large volumes of woody biomass available for utilization. In 2007 alone, the US federal government spent nearly $2 billion to fight forest fires on federal lands. Annually, the USDA Forest Service spends $1 billion to thin young trees...
Synthetic adhesives, such as phenol-formaldehyde (PF) resins and urea-formaldehyde (UF) resins, have dominated the wood adhesive market since they were introduced in the wood products industry. Formaldehyde, as a key component in the manufacturing of PF and UF resins, has been classified as a known human carcinogen by the International...
The Pacific Northwest is blessed with an abundance of precipitation. This rainfall, however, can have important consequences for industries that must process the resulting stormwater for proper discharge. This is particularly true of wood treatment facilities. Past management practices at wood preserving facilities located in the Western United States create...
The context of this thesis is a research project focused on the investigation of a renewable biopolymer-poly(lactic acid) (PLA) as a potential replacement of petroleum-based polymers in advanced nanocomposites reinforced with Microfibrillated cellulose (MFC). MFC is extracted from wood, which is a renewable, sustainable, carbon neutral and recyclable material. This...
Export-oriented illegal logging has been recognized as a major global problem in environmental, social, and economic terms. It has been argued that export-oriented illegal logging does not benefit the community or government that should be benefited by its own natural resources. The emergence of policy initiatives targeting illegal logging could...
Polymeric composites reinforced with bio-materials have advantages over composites with synthetic reinforcements. Bio-based composites use low-cost and renewable reinforcements, have nonabrasive properties for machining, have improved damping characteristics, and have potential for energy recycling. However, the limited use of bio-based composites is because their mechanical properties are typically much lower...
Logging and forest thinning operations generate large amounts of residues in the form of small trees, branches and foliage that are usually left on the ground to decay or are burned. These resources are readily available, but it is uneconomical to remove them from the forest. The potential utilization of...
Since 2004 there have been multiple devastating tsunamis around the globe triggered by large magnitude earthquakes; with the most recent being the Tohoku, Japan tsunami in March 2011. These tsunamis have caused significant loss of life and damage to the coastal communities impacted by these powerful waves. The resulting devastation...
Innovation is a critical component for long term success of an organization. However, being innovative is rarely easy. Successful implementation of any innovation (product, process, or business system) can heavily rely on the functionality of the current innovation system in a given industry. An innovation system is composed of policies,...
The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
The purpose of this thesis was to evaluate orthogonal cutting as a method to determine the fracture toughness of low and high density polyethylene and wood plastic composites. A test fixture was developed to capture normal and tangential cutting forces at variable depth and rake angle. A tool interface method...
The fixed bed drying of western hemlock and Douglas-fir biomass particles at temperatures ranging from 50°C to 200°C and air velocities from 0.3 to 0.9 m/s was investigated. The objectives were to describe the drying characteristics of the particles, fit a model for thin-layer drying, and develop and test a...
The objective of this study was to develop and validate practical modeling
methods for investigating load paths and system behavior in a realistic, light-frame wood
structure. The modeling methods were validated against full-scale tests on subassemblies
and an L-shaped house. The model of the L-shaped house was then modified
and...
The wood products industry is influenced heavily by family ownership along the entire value chain. Although family ownership affects each link of the wood products value chain, there has been little research into the importance of products originating from family forestland. Specific attributes of products, such as origin or environmental...
Western juniper and cinnamon essential oils were combined with ethanol at 2.5, 5, and 10% concentrations by weight and applied to hybrid poplar (Populus trichocarpa x P. deltoids) veneers by vacuum soaking to produce a naturally durable wood veneer with increased mechanical properties for use in structural composites. Half of...
Face checking in decorative maple veneered plywood panels is a significant
problem for hardwood plywood manufacturers, furniture makers, cabinetmakers, and consumers. Efforts made by panel producers and researchers to minimize checking conducted to-‐date have been limited, and produced contradictory results. In this study the impact of four manufacturing factors believed...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
As oriented strand board (OSB) increases in use as an engineered wood product, improving the in-plane shear properties will allow more efficient use of the material as well as open up other opportunities for OSB to be used in engineered wood products with high shear stresses. Based on classical laminated...
Copper is the most common ingredient in waterborne preservatives and provides excellent activity against most fungi and insects. However, issues associated with copper migration from treated wood have created increasing concerns about potential risks to non-target organisms in surrounding environments, especially those in sensitive aquatic environments. Various Best Management Practices...
Existing pressure sensitive adhesives (PSAs) are mostly based on petrochemicals. In this study, a novel PSA based on a renewable material, methyl oleate, was prepared and characterized. Methyl oleate was first epoxidized to form epoxidized methyl oleate that was subsequently hydrolyzed and acidified to form epoxidized oleic acid (EOA) which...
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...
Plywood is the second largest, by value, wood-based product being imported by United Arab Emirates (UAE), below paper products and also second in terms of volume below sawn wood. Very few studies have been done of the UAE market for plywood. This thesis takes a scientific, marketing planning approach to...
Phytophthora ramorum is a plant pathogen that was accidentally introduced to the United States. This invasive microorganism has killed over a million trees in California and Oregon, and continues to spread to new areas. Diseased areas have been nationally quarantined to prevent further spread and more than ninety countries include...
Resistance to moisture uptake is an important attribute of some wood preservatives and can help reduce moisture cycling that leads to the development of deep checks. While the potential for preservative treatments to help improve wood/moisture interactions is acknowledged, there are no tests that specifically evaluate this performance parameter. Checking...
Architects and engineers are two key types of design professionals who influence the use of wood products in construction. Eighty to ninety percent by volume of all residential structures in the U.S. are wood (Gupta, 2005). In 2010, the non-residential market was made up by 10% wood, 60% steel and...
With the resurgence in the interest of using natural textile dyes, a solution must be found that will overcome the limitations of traditional natural dyes. This solution must also be safer for both humankind and the environment than are synthetic dyes. This study compares the colorfastness of commercially available synthetic...
The ecosystem services provided by our forest resources and woodlands are multiple and diverse on all spatial and temporal levels, and include provision, regulating, cultural, and supporting services (Hanson, et al. WRI, 2008). Human activities are proximate and direct drivers of deforestation and forest degradation. In the Latin American region,...
Sandwich composites are typically produced from two high strength facings bonded to a lower strength, lightweight core. Sandwich design has proven to be efficient for applications demanding high strength and low weight. Wood-based sandwich composites have been largely limited to non-structural applications with the exception of structural insulated panels and...
Commercial methodologies for producing fungal pigments are of worldwide interest due to the desire to move away from synthetic dyes. Chlorociboria species and Scytalidium species have been reported to produce sufficient yields of pigments for commercial production and have attracted special attention because of their use in spalted wood applications....
Small landowners in the state of Oregon find it difficult to be competitive with larger companies to provide traditional forest products to consumers. Additionally, many landowners hope to be profitable from their land, but are not necessarily interested in or have the capability to harvest large tracts of timber. Specialty...
Many nondestructive techniques for structural health monitoring are subjective and based on visual observations of degradation. In addition, dynamic properties of structures are already used to obtain quantitative structural health data. However, most current data collection is limited to localized damage on the structure, rather than global response. Recent research...
The objectives of this study are to use SAP2000 to investigate lateral load paths and system behavior in a modular, light-frame wood structure by investigating different foundation configurations and to further develop and validate existing modeling techniques of shear wall elements based on the Perforated Shear Wall Method. The modeling...
Boron and boron compounds have been long used for pressure treatment, dip-diffusion, and remedial treatments of wood because of their proven efficacy against fungi and insects. These materials are especially attractive because their high water solubility promotes deeper penetration into wood. Other useful properties of boron include its neutral pH,...
Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
In the residential sector, wood is the predominant construction material. In the commercial sector and in mid‐rise construction, the use of wood is limited because of a multitude of reasons, including building code restrictions, the perception of wood as a structural material, fire code requirements, and lack of knowledge and...