Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
The objective of this research project was to increase the density, strength, and stiffness of two low to medium-density diffuse-porous hardwood species. Wood used in this study was processed using a method of wood densification known as “Viscoelastic Thermal Compression” (VTC). The VTC process is a three phase treatment which...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
This study examined the relationship of interfacial shear strength (IFSS) and
bending strength (MOR) of several different wood-plastic composites (WPC's).
Plastics utilized were high-density polyethylene (HDPE) and polypropylene (PP).
Pine and oak were used as the wood species. Compatibilizers used included maleicanhydride
polyethylene (MAPE), polymeric methylene diphenyl diisocyanate (PMDI),
KymeneTM,...
The fundamental intent of the study was to develop an innovative wood-strand composite for use in structural applications. Plantation grown, low density, hybrid poplar was used in the study which was found to be appropriate for the underlying Viscoelastic Thermal Compression (VTC) process. Wood modified by this process has high...
The tendency of wood to shrink and swell with changing moisture content remains as one of the most significant challenges to using wood in its many applications. Viscoelastic Thermal Compression (VTC) has been shown to significantly increase the density, strength and stiffness of wood. However, dimensional stability is still a...
Wood plastic composites (WPCs) are composite materials made from thermoplastic polymers, wood flour, and a small amount of process- and property-enhancing additives; they are principally used in the automotive industry and as secondary building materials. Although the WPC market is expected to keep growing, it is still relatively small when...
The increasing demand for forest products and restricted use of natural forests has resulted in a shortage of high-strength wood fiber. The area covered by plantation forests is steadily rising, but the fiber produced by these forests is often unsuitable for high-strength applications. One attempt to combat this problem is...
The objective of this study was to determine the effect of misplaced hold-downs
on the static and cyclic behavior of wood shear walls. Three shear wall
configurations were considered in this study. The first configuration (control) had
hold-downs at the ends of the wall (wall type 1), the second configuration...
There are over 130 million wood poles supporting electrical transmission and distribution lines in the U.S. The vast majority of these poles are preservative treated to prolong their useful life. In some cases, however, the depth of treatment is relatively shallow, leaving a deep zone of moderately durable, untreated heartwood....
There are about 80 million single-family dwellings (SFD) in the United States, predominantly of wood-frame construction. Of these, 68% are owner occupied. A home is typically the largest single investment of a family, and is often not covered by earthquake insurance, even where it is available. Of all SFD in...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
Connections in mass timber structural systems dissipate energy and transfer lateral forces from mass timber elements such as shear walls and diaphragms, providing critical load paths. Cross-laminated timber (CLT) is a prominent mass timber material used to manufacture wall and floor assemblies. Fire performance research of CLT walls and floors...
High density polyethylene (HDPE) is a ubiquitous material with versatile properties. It is produced and used in greater volume than any other thermoplastic. HDPE is often filled with a variety of materials for various applications. Glass fiber and wood flour are two common fillers for HDPE. Recently there has been...
Cross-laminated timber (CLT) is revolutionizing the use of wood in the construction sector of North America as a solution for walls and diaphragms in mid-rise or even high-rise timber structures on account of its environmental advantages, high strength-to-weight ratio, fire-safety performance, and propensity for prefabrication. However, considering the hygroscopic nature...
Existing pressure sensitive adhesives (PSAs) are mostly based on petrochemicals. In this study, a novel PSA based on a renewable material, methyl oleate, was prepared and characterized. Methyl oleate was first epoxidized to form epoxidized methyl oleate that was subsequently hydrolyzed and acidified to form epoxidized oleic acid (EOA) which...
In the search to improve and incorporate nano and renewable materials into urea-formaldehyde (UF), several researchers have incorporated cellulose nano fibrillated (CNF) into the adhesive. This study aimed to find an optimal way of incorporating CNF into UF and understand how CNF interacts with and changes the properties of the...
Wood-based composites (WBCs) are an important sector of the US economy. For a WBC product to succeed, understanding its long-term durability, including seasonal variations in temperature and humidity, is critical. Durability is especially important WBCs because they are predominantly made from wood, which is a biological, hygroscopic material that is...
Wood-plastic composites (WPCs) are one of the fastest-growing sectors of the
wood composites industry. However, the strengths of WPCs are typically low
because of the poor interfacial adhesion between hydrophilic wood and
hydrophobic thermoplastics. A compatibilizer that can form bridges between wood
and plastics is required to give WPCs desirable...
Sandwich composites are typically produced from two high strength facings bonded to a lower strength, lightweight core. Sandwich design has proven to be efficient for applications demanding high strength and low weight. Wood-based sandwich composites have been largely limited to non-structural applications with the exception of structural insulated panels and...
The majority of low-rise residential structures in the U.S. are constructed with wood. Wood-based composites are primary building materials in these structures, used as structural sheathing, joists, and beam components. Wood composites are susceptible to degradation upon exposure to high levels of moisture. Moisture durability is routinely assessed with accelerated...
There is a continual interest in developing robust, flexible, durable, lightweight, waterborne polymer barrier coatings which are increasingly resistant towards both chemical warfare agents as well as an ever growing number of toxic industrial chemicals. In this study, barrier films were prepared with poly(vinyl alcohol) (PVOH) and varying amounts of...
The internal structure of natural fiber composites can be manipulated by controlling the spatial distribution of fiber orientation and internal chemical and thermodynamic conditions during their consolidation. Objects highly tailored to specific service demands may thereby be produced. Techniques to form miniature structural beams from oriented hemp and random wood...
The objectives of this study are: (1) to evaluate the effect of reference
displacement on wall behavior under fully reversed cyclic loading using the
CUREE test protocol and (2) to assess damage accumulation (visible fastener
damage and stiffness degradation) for the imposed drift levels. All tests were
conducted on identical...
As a new product patented by Freres Lumber Company in 2018, little information exists for manu-facturing procedures of mass plywood panels (MPP). At first glance, MPP may appear to be ply-wood, laminated veneer lumber (LVL), or similar to conventional cross-laminated timber (CLT). Often manufacturers, as well as users, of MPP...
Mass timber (MT) offers viable eco-conscious solutions within the building industry, with its high strength ratings, dimensional stability, light weight and renewable nature enhancing its status as a low carbon alternative to conventional building materials like steel and concrete. Moisture intrusion, coupled with the inherent organic nature of wood pose...
Formaldehyde-based adhesives such as urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives dominate the current wood adhesive market. However, these adhesives are derived from petrochemicals and carcinogenic formaldehyde. In this study, we developed two formaldehyde-free adhesives based on abundant, renewable, and inexpensive soy flour (SF).
The first adhesive was mainly composed of...
This study examined the decay resistance of the pine and maple components of wood plastic composites (WPC' s) of varying thicknesses exposed on several culture media to wood decay fungi under laboratory conditions. The ability of malt agar extract (MEA), potato dextrose agar (PDA), amended basal salts, sawdust (maple and...
Wood adhesives are essential components of wood composites. At
present, the commonly used wood adhesives, phenol-formaldehyde (PF)
and urea-formaldehyde (UF) resins, are petroleum-based synthetic resins
that may result in emission of formaldehyde in the production and use of
wood composites. Because the world's oil reserves are naturally limited
and formaldehyde...
In wood-plastic composites (WPCs) a compatibilizer is often used to improve
the interfacial adhesion between the hydrophilic wood filler and the hydrophobic
plastic matrix. At present, while the basic concepts of compatibilization are
understood, the optimized chemical structures of an effective compatibilizer, including
the ideal structures of the wood-binding domain...
Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), a shade intolerant species, and western hemlock (Tsuga heterophylla (Raf.) Sarg.), a shade tolerant species, were compared to learn more about the temporal pattern of release from suppression in both species, whether hydraulic architecture or photosynthetic capacity constrain release and how wood functional properties change...
The effects of incorporation of selected biocides on physical and mechanical properties of aspen strandboard were assessed using five copper-based preservatives or zinc borate at three retention levels. Tebuconazole or 4,5-dichloro-2-N-octyl-4-isothiazolin-3-one (DCOI) were added as co-biocides to selective copper-based treatments. Mold box tests showed that only panels treated with DCOI...
Many wood composites are known to poorly resist the effects of moisture and temperature extremes over time. Degradation of adhesive bonds, irreversible thickness swell and dimensional instability result in a decrease of properties and a possible failure of the material. Accelerated weathering has become an essential tool for assessment of...
Western juniper and cinnamon essential oils were combined with ethanol at 2.5, 5, and 10% concentrations by weight and applied to hybrid poplar (Populus trichocarpa x P. deltoids) veneers by vacuum soaking to produce a naturally durable wood veneer with increased mechanical properties for use in structural composites. Half of...
Synthetic adhesives like phenol formaldehyde (PF) and isocyanates dominate the
wood based structural panel market. The raw materials that makeup these adhesives
are based on petroleum and natural gas. The sustainability and the continued success
of the wood based structural panel industry will benefit from the development of
alternative adhesives...
Moisture intrusion in residential structures can lead to substantial fungal decay and this damage costs billions in repair/replacement costs. The extent of damage and the rate at which it occurs are primarily dependent on the wood moisture content and temperature in the structure. Determining the risk of decay for various...
The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
As oriented strand board (OSB) increases in use as an engineered wood product, improving the in-plane shear properties will allow more efficient use of the material as well as open up other opportunities for OSB to be used in engineered wood products with high shear stresses. Based on classical laminated...
The fabrication of nano-scale devices is a challenging, but potentially important, technology that has drawn a great deal of interest among researchers. Such nanoscale constructions utilizing a bottom-up approach for device building have many foreseeable applications in areas as diverse as miniaturized electronics, sensors, and biomedical devices.
One of the...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
As the forest industry moves toward the use of younger trees and production of an increasing number of composite products improving durability has gained importance. Coatings are one of the most widely used methods for improving wood durability because they improve resistance to water penetration, and subsequent shrinking and swelling,...
Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...
In the last few decades new trends and innovations in wood products have emerged that are changing the way we can use this material in buildings. Additionally, wood is a material that has been touted to have many positive attributes in comparison to nonrenewable construction materials such as steel and...
Transgenic down-regulation of the Pt4CL1 gene family encoding 4-coumarate:coenzyme A ligase (4CL) has been reported as a
means for reducing lignin content in cell walls and increasing overall growth rates, thereby improving feedstock quality for
paper and bioethanol production. Using hybrid poplar (Populus tremula 3 Populus alba), we applied this...
Cross-laminated timber (CLT) panels have been gaining popularity as diaphragm elements in mid- to high-rise construction projects. In addition, CLT-concrete composite (CCC) diaphragms have been implemented to expand the use of CLT diaphragms. To understand the behavior of CLT and CCC diaphragms, this research effort sought to characterize the cyclic,...
Wildfire prevention operations like forest thinning and forest fuel removal result in large volumes of woody biomass available for utilization. In 2007 alone, the US federal government spent nearly $2 billion to fight forest fires on federal lands. Annually, the USDA Forest Service spends $1 billion to thin young trees...
Timber-concrete composite (TCC) solutions originated in the early twentieth century. There has been a renewed interest in TCC solutions in modern mass timber buildings, especially for floor systems. However due to lack of data, design standards, and code acceptance, TCC solutions require that new mass timber solutions be tested, and...
One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...
Rubber without reinforcement has limited applications. The strength of reinforced rubber composites can be ten times stronger than that of unreinforced rubbers. Therefore, rubber composites are widely used in various applications ranging from automobile tires to seals, valves, and gaskets because of their excellent mechanical elastic properties. Silica and carbon...
This thesis focuses on the fundamental behavior of CLT floor-to-wall connections during a fire.
Cross-laminated timber (CLT) panelized structures rely on floor-to-wall connections for the load path and stability of the structure. Additionally, the fire performance of these connections is critical to prevent horizontal or vertical fire spread within these...
Formaldehyde-based adhesives such as urea-formaldehyde (UF), phenol-formaldehyde (PF) are widely applied in wood-based composite industry. However, these adhesives are all petrochemical-based and could not sustain in a long term due to a limited reserve of oil and natural gas. Moreover, these adhesives emit carcinogenic formaldehyde in the production or use...
Natural fibers such as wood, flax, and hemp are frequently used as fillers in natural fiber-plastic composites (NFPCs). At present, wood fiber is the most commonly used filler in the production of wood-plastic composites (WPCs). The advantages of these fibers compared to conventional inorganic fibers such as glass fiber is...
Light-frame construction practices and materials have changed greatly
over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
Wood-based composites such as plywood and particleboard are produced with a thermoset adhesive via a hot-press process. At present, UF is the most commonly used thermoset adhesive for production of decorative plywood. The emission of the carcinogenic formaldehyde from UF-bonded panels during the use of panels affects the indoor air...
The sustainable use of wood for rail ties requires chemical treatment to increase service life and maintain structural integrity. Treatment can only be applied after lengthy air-seasoning to reduce moisture content in wood, but seasoning leaves ties exposed to attack by decay fungi for up to a year. One factor...
Non-destructive commercial ultrasonic grading provides laminated veneer lumber (LVL) manufacturers a means for sorting veneer based on average ultrasonic propagation time (UPT) and/or average dynamic modulus of elasticity (MOEd). While this may provide reliable estimations of modulus of elasticity (MOE), little is known about the influence of veneer defects on...
Natural dyes have been used to color textiles for centuries, but with the shift to mass production, the use of synthetic dyes has increased due to their lower cost and easy manufacturing volume. However, synthetic dyes (such as disperse blue dyes 106 and 124) have been reported to cause skin...
.................................................................................................. 77
SEM image analysis of the tear strength test ........................................... 79
Timber engineering is currently in the midst of a significant evolution due to the rise of mass timber products, like cross-laminated timber (CLT). Increasing numbers of structural engineers are facing the challenge of designing lateral-force-resisting systems (LFRS) for multistory CLT structures. LFRS solutions such as steel frames, concrete cores, or...
Cross-Laminated Timber (CLT) is one of the latest engineered wood products to show promising structural features for a variety of structural purposes including resisting lateral loads. For CLT to be widely adopted, its modal behavior needs to be fully evaluated through experimental and numerical methods. It is important to the...
Dimensional stability of wood-based composites with changing moisture content remains an important challenge in the industry for many applications. Wood modification technologies have shown significant improvement in dimensional stability by altering the chemistry of the wood substrate, or by filling the available space in the wood microstructure that otherwise would...
Presently, the production of wood composites relies on the formaldehyde-based wood adhesives such as phenol-formaldehyde (PF) and urea-formaldehyde (UF). However, their dependence on exhaustible fossil fuels and the emission of carcinogenic formaldehyde prompt to develop an environmentally friendly adhesive from renewable natural resources. This work focuses on development and characterization...
Timber-concrete composite (TCC) floors have improved strength and stiffness when compared to timber-only floors, allowing for longer spans in buildings and improved life safety. However, North America does not have codes and standards that recognize TCC floors, particularly the improved life safety performance of these floors in fire. Therefore, alternate...
Friction dampers have been used successfully to dissipate seismic
energy in steel and concrete structures. The application is new to timber
structures. The objectives of this research were to design a slotted bolted
connection (SBC) and evaluate its potential as a passive energy damper in
timber brace.
The research was...
Synthetic adhesives, such as phenol-formaldehyde (PF) resins and urea-formaldehyde (UF) resins, have dominated the wood adhesive market since they were introduced in the wood products industry. Formaldehyde, as a key component in the manufacturing of PF and UF resins, has been classified as a known human carcinogen by the International...
The goal of this project was to develop an integrated pest management strategy
for the control of a powder-post beetle (Dinoderus minutus F.). This species causes
serious damage in Philippine bamboo. Developmental threshold and thermal constants
were examined and natural enemies and ftmgi associated with beetles were investigated.
Finally, the...
Policy makers in the United States (US), following recommendations made by the international scientific community, have drafted national emissions reduction legislation in hopes of minimizing the harmful effects of global climate change. Included in this legislation is a national cap-and-trade system with provisions for carbon offsets. Specific provisions for forest...
Microchannel devices are rapidly evolving process technology with a wide variety of applications. Microchannel devices hold the potential to transform many separation processes. One potential application for such microchannel devices is kidney dialysis. By reducing the size and cost of the device, this technology offers the potential to allow dialysis...
Boron and boron compounds have been long used for pressure treatment, dip-diffusion, and remedial treatments of wood because of their proven efficacy against fungi and insects. These materials are especially attractive because their high water solubility promotes deeper penetration into wood. Other useful properties of boron include its neutral pH,...
Hygro-mechanical effect is a general term applied to all phenomena that involves interaction between moisture content and mechanical characteristics of hygroscopic materials by analogy to thermo-mechanical effects. The hygromechanical effects include (but are not limited to) free shrinkage/swelling, effect of moisture on elastic modulus, strength, creep, failure mechanisms, and mechano...
Most of existing commercial unsaturated polyester (UPE) resins are typically composed of a UPE and a high amount of highly volatile, flammable, and toxic styrene. The emission of hazardous styrene in the handling of the UPE resins and the preparation and use of fiber-reinforced UPE composites poses severe hazards to...
Rapid discoloration and checking of wooden surfaces when exposed outdoors has caused wood to fall out of favor as an outdoor building material, especially in applications where appearance is important. The surface appearance of wood products exposed outdoors can be improved through the application of film forming coatings or by...
Logging and forest thinning operations generate large amounts of residues in the form of small trees, branches and foliage that are usually left on the ground to decay or are burned. These resources are readily available, but it is uneconomical to remove them from the forest. The potential utilization of...
Key parts of the lateral force resisting system in wood-frame buildings
are the shearwafls and the connections. The connections in wooden buildings
are the primary source of ductility and energy dissipation; these are essential
properties when buildings are exposed to lateral forces, such as wind and
earthquakes. Shearwall design is...
Supercritical fluid (SCF) impregnation is a promising preservative treatment method, however, the development of SCF processes has been slowed by a limited understanding of the process. Developing a better understanding of the effects of various process parameters on treatment results would allow for a more rational development of SCF impregnation....
Copper migration from treated wood has created concerns within the
environmental community because of the potential effects of this heavy
metal on aquatic organisms. Migration can be limited, to some extent, by
more controlled treatments and by post-treatment processing, but these
actions cannot completely overcome the problem. An alternative approach...
Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
The mechanical performance of composite materials is determined by the mechanical properties of their individual components and the effective load transfer between these components. Binders are commonly used to bond composite components together and to provide effective load transfer between them. In wood-based composites the binder-component load transfer occurs at...
Natural fibers are gaining popularity as reinforcement materials for thermoset resins over the last two decades. Natural fibers are inexpensive, abundant, renewable and environmentally friendly. Kenaf fibers are one of the natural fibers that can potentially be used for reinforcing unsaturated polyester (UPE). As a polymer matrix, UPE enjoys a...
Today nano scale materials are being used for wide range of applications. One promising topic in nano scale materials is using them for reinforcement of different polymeric materials to reach desirable stiffness properties. The stiffness of these materials is mostly found experimentally because the nanocomposite community lacks a decent analytical...
Polymeric composites reinforced with bio-materials have advantages over composites with synthetic reinforcements. Bio-based composites use low-cost and renewable reinforcements, have nonabrasive properties for machining, have improved damping characteristics, and have potential for energy recycling. However, the limited use of bio-based composites is because their mechanical properties are typically much lower...
..................................................................................................................................................... 84
Figure 5.15: Axial strain results of MPM tension simulation for different yield strength in a
Using plant fibers as a potential renewable material to substitute for glass fibers in fiber-reinforced polymer composites has been growing since the late 1990s. Due to high demand, there has been a shift towards ‘green concept’ material in many applications. Numerous secondary plant fibers have been explored as a source...
The emission of organic compounds from wood manufacturing
facilities is an important regulatory concern due to their effects on ambient
air quality. Control technologies, such as oxidizers and biofiltration, are
used to remove organics from air streams; however, most removal
technologies have high costs or cause additional negative environmental
impact....
Civil engineers are aware of the impacts of structures on the global environment but the environmental impacts of a fire within these structures remains unknown. Fires present a unique hazard as it is difficult to predict the probability of the occurrence and the intensity. Traditional methods to identify the environmental...
Accelerated weathering (AW) tests have become a requirement for many wood composite products. This project monitored temperature and moisture content of specimens undergoing AW exposure for the following standards: ASTM D3434 (automatic boil test), CSA O112.9 (boil-dry-freeze), and PS2 (Section 7.17, 6-cycle VPS). Each AW procedure was conducted with three...
The purpose of this thesis was to evaluate orthogonal cutting as a method to determine the fracture toughness of low and high density polyethylene and wood plastic composites. A test fixture was developed to capture normal and tangential cutting forces at variable depth and rake angle. A tool interface method...
Cross laminated timber (CLT) is a relatively new engineered wood product that has elevated the prospects of utilizing wood as the primary structural material for mid and high rise buildings. The hygrothermal performance of CLT, however, is still not well understood at the material, assembly and building scales. A major...
Copper is an excellent biocide which has a long history of usage for protecting wood from deterioration, but some organisms have developed tolerance for this chemical. Copper tolerance among wood decay fungi is a poorly understood phenomenon that is gaining importance as cofactors such as arsenic and chromium are removed...
In the residential sector, wood is the predominant construction material. In the commercial sector and in mid‐rise construction, the use of wood is limited because of a multitude of reasons, including building code restrictions, the perception of wood as a structural material, fire code requirements, and lack of knowledge and...
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
With growing interest in mass timber, especially mass timber panels (MTP), there has been a need to better understand their structural properties. One of the most versatile uses for MTP are as floor systems. Under new code provisions, these floors can be utilized in new and taller building types, but...
Heartwood can have properties that are distinct from sapwood,
including resistance to insect and microbial attack. Despite the practical
importance of heartwood formation in trees, a review of the literature revealed
that little was known about the effects of environmental factors on heartwood
quality or how variations in heartwood properties...
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
As mass-timber building construction rises around the globe, there exists the need to verify the long-term, in-situ behavior and performance of these structural systems. Structural health monitoring (SHM), generally defined as a damage detection strategy consisting of a network of sensors, a data acquisition system, and algorithms for data analysis,...
Wood-staining fungal pigments have potential uses as colorants for wood and textiles. Traditionally, organic solvents have been used as carriers for these pigments. However, other environmentally-friendly and more readily available carriers must be found. Natural oils have the potential to carry these pigments but have demonstrated color loss over relatively...
Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...
During the past several decades, earthquakes have caused extensive damage to
buildings, including wood-frame, single-family dwellings, in the United States. In
order to mitigate future losses, existing buildings in earthquake prone areas should be
evaluated for their seismic safety. This is also an important issue for buildings in
Oregon due...
Fungi from the genus Chlorociboria are known for their production of the blue-green quinonic pigment xylindein. Extracted xylindein has been the subject of investigations ranging from fabric dying to use a coloring agent in paint, and shows potential as an organic semiconductor in organic photovoltaics (OPVs) and other technologies. However,...