At frequencies exceeding 1-2 GHz, the reactive nature of a silicon substrate must be accounted in the substrate network models used in substrate coupling simulation. High-frequency substrate models, containing reactive components, must be validated through high-frequency network analyzer measurements. Prior fabricated test fixtures have been modified to enable high-frequency (up...
The substrate noise injected by a stepped buffer circuit into two single-ended 1.5GHz low noise amplifiers is examined for a heavily doped 0.25µm CMOS process. The difference in the LNA noise rejection is characterized as a function of the size and placement of substrate contacts. The use of a resistive...
In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications.
So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....
A Z-parameter based macromodel for characterizing the substrate noise coupling in a lightly doped substrate at low frequencies has been developed. The model is scalable with contact geometries and separation. The cross-coupling impedance between two contacts is modeled using an improved geometric mean distance formulation. This approach obviates the need...
An automated method, requiring the fabrication of a small set of test structures, efficiently extracts the coefficients of Z-parameter based macromodels. The extraction approach has been validated for both heavily and lightly doped substrates and can be applied to a variety of technologies. After the parameters of a macromodel have...
A computationally efficient and accurate substrate noise coupling model for multiple contacts in heavily doped CMOS processes is presented and validated with simulations and experimental data. The model is based on Z parameters that are scalable with contact separation and size. This results in fast extraction of substrate resistances for...
At frequencies exceeding 1-2 GHz, the substrate network models used in substrate coupling simulation must account for the reactive nature of the substrate. Unlike at low frequencies, where the purely resistive substrate models can be validated through DC resistance measurements, these high-frequency models, comprising reactive components, must be validated through...
What are the most effective ways to improve the engineering curriculum? Improvements should result in increased student retention, undergraduates who are more industry-ready and graduates who are better prepared to be leaders. Current research suggests that the best predictor of persistence is a person’s self-efficacy. The focus of this thesis...