Index Catalog // ScholarsArchive@OSU

Manufacturing Process Design and Electrically-Assisted Embossing of a Microchannel Solar Receiver

Creator:: McNeff, Patrick S.
Abstract:: Manufacturing process design (MPD) represents a design-oriented approach to manufacturing engineering. In this dissertation, Haynes 230 (H230), a solid solution-strengthened Ni-based superalloy, was chosen to meet the material requirements of a microchannel solar receiver (MSR) needed to increase the efficiency and reduce the cost of solar thermal power generation. An...
Resource Type:: Dissertation
Full Text:: : ______________________________________________________ Brian K. Paul Manufacturing process design (MPD) represents a design-oriented approach to

Half Array Architecture for Advancing Microchannel Heat Recuperation to Market

Creator:: Brannon, Samuel T.
Abstract:: High temperature microchannel heat recuperators (HTμRs) offer an efficient means of improving reactor process thermal efficiency by offering smaller form factors due to increased heat transfer surface area density and volumetric heat transfer rate over traditional heat exchanger designs. To date, HTμRs face cost and reliability challenges. In this work,...
Resource Type:: Dissertation
Full Text:: approved: Brian K. Paul High temperature microchannel heat recuperators (HTµRs) offer an efficient means

Process Physics, Strategies and Economics in Metal Additive Manufacturing and Digital Microstructural Control for Energy and Chemical Process Components

Creator:: Manoharan, Sriram
Abstract:: Advances in plant construction within the energy and chemical process industries require inexpensive process intensification (PI) technology as a means to reduce plant size for enabling modular construction. One form of PI is microchannel process technology where arrays of microchannels, having hydraulic diameters on the order of 0.1 to 1...
Resource Type:: Dissertation
Full Text:: : ______________________________________________________ Brian K. Paul Advances in plant construction within the energy and chemical process

Development of self-registration features for the assembly of a microchannel hemodialyser

Creator:: Porter, Spencer D.
Abstract:: More than 1.2 million people worldwide require regular hemodialysis therapy to treat end stage renal failure. In the United States alone, there are 300,000 patients and the National Kidney Foundation predicts that this number will double in the next 10 years. Currently most dialysis patients receive treatment at a dialysis...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Spencer D. Porter

Mechanical characterization and modeling of solder joints for the secondary side reflow of large IC packages

Creator:: Yutzie, James D.
Abstract:: As the drive continues to reduce the size of Printed Wiring Assemblies (PWAs), improve performance of electronic assemblies, and reduce costs of these products, reliable secondary (bottom) side reflow operations must be developed. Attaching Surface Mount Technology (SMT) components to the secondary side of a Printed Circuit Board (PCB) is...
Resource Type:: Masters Thesis
Full Text:: the secondary side reflow of large IC packages AN ABSTRACT OF THE THESIS OF James D. Yutzie for

Modeling and development of fabrication method for embedding membrane based microvalve in bulk microfluidic device

Creator:: Abhinkar, Bindiya S.
Abstract:: PDMS membrane-based microvalves are becoming increasingly more important for the control of fluid flow within MECS applications such as microreactors used to synthesize nanoparticles and biological macromolecules. The motivation for pursuing PDMS membrane-based microvalves is for implementing a plug flow microreactor to simulate slug flow yielding a narrower residence time...
Resource Type:: Masters Thesis
Full Text:: : _____________________________________________________________________ Brian K. Paul PDMS membrane-based microvalves are becoming increasingly more important

Characterization and Prediction of Reactive Forces for Compressed 3D Printed Hyperelastic Lattice Structures

Creator:: So, David M.
Abstract:: In order to generate practical ways to easily design functional flexible lattice structures, this research seeks to find a way to predict reactive forces of compressed hyperelastic cubic lattice structures. Using 3D printed test coupons, material data was collected for use in finite element analysis. Cubic lattice structures with varying...
Resource Type:: Honors College Thesis
Full Text:: :_____________________________________________________ Brian Paul In order to generate practical ways to easily design functional flexible

Manufacturing Process Design for a Stamped Microchannel High-Temperature Recuperator

Creator:: Song, Chuankai
Abstract:: Microchannel high temperature recuperators have the advantage of higher heat transfer coefficients and lower size and weight than traditional high temperature recuperators. However, the industrial application of microchannel recuperators are restricted by the high cost of photochemical machining and diffusion bonding. The objective of this paper is to introduce a...
Resource Type:: Masters Thesis
Full Text:: approved: ______________________________________________________ Brian K. Paul Microchannel

A Manufacturing Process Design for Producing a Membrane-based Energy Recovery Ventilator with High Aspect Ratio Support Ribs

Creator:: Kawula, Steven P.
Abstract:: Heating, ventilation, and air conditioning systems represent nearly half of building energy usage in the United States. Recent building regulations requiring increased air turnover within buildings will result in even greater air conditioning usage. To alleviate these concerns, membrane-based heat-and-moisture exchangers known as energy recovery ventilators have been developed to...
Resource Type:: Masters Thesis
Full Text:: Brian K. Paul Heating, ventilation, and air conditioning systems represent nearly half of

Force Prediction in the Compression Sealing of an Ultra-thin Elastoviscoplastic Membrane

Creator:: McNeff, Patrick Scot
Abstract:: The objective of this paper is to demonstrate a method for mechanically characterizing a 25 μm thick elastoviscoplastic hemodialysis membrane and for quantifying the force required to use that membrane in compression sealing. First, methods are developed for mechanically characterizing the thin elastoviscoplastic membrane. Then, a finite element model is...
Resource Type:: Masters Thesis
Full Text:: Brian K. Paul The objective of this paper is to demonstrate a method for mechanically

ScholarsArchive@OSU

Manufacturing Process Design and Electrically-Assisted Embossing of a Microchannel Solar Receiver

Half Array Architecture for Advancing Microchannel Heat Recuperation to Market

Process Physics, Strategies and Economics in Metal Additive Manufacturing and Digital Microstructural Control for Energy and Chemical Process Components

Development of self-registration features for the assembly of a microchannel hemodialyser

Mechanical characterization and modeling of solder joints for the secondary side reflow of large IC packages

Modeling and development of fabrication method for embedding membrane based microvalve in bulk microfluidic device

Characterization and Prediction of Reactive Forces for Compressed 3D Printed Hyperelastic Lattice Structures

Manufacturing Process Design for a Stamped Microchannel High-Temperature Recuperator

A Manufacturing Process Design for Producing a Membrane-based Energy Recovery Ventilator with High Aspect Ratio Support Ribs

Force Prediction in the Compression Sealing of an Ultra-thin Elastoviscoplastic Membrane

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search