This thesis describes the control circuitry for a
telemetry system developed to report hydrologic information
from remote locations. The multiparameter,
on-call system operates on a single frequency. Each
remote station responds to a predetermined number of
pulses from the master station. Data is transmitted by
pulse- duration modulation.
In the...
Because the life processes of the plant are related in a complex
way to the balance between the water demand of the atmosphere and
the water availability to the plant root, an exploration of the dynamic
status of water in the plant is very important. The stomata constitute
the main...
Due to the present trend to utilize both virtual memory and
paging for the implementation of storage for large-scale computer
systems, it is of interest to analyze the pertinent parameters
associated with the operation of a paging system. This paper
describes the paging process and determines the effect of variations...
Because of its characteristics, the square-loop magnetic core
can be used as the basic device in a logic system. A magnetomotive
force (mmf) which is below the threshold mmf of such a core will
cause a negligible, nonpermanent amount of flux change in the core;
and information signals can be...
This paper is the result of extensive experiments, investigating the effect on typical distribution transformers when operated overexcited as much as 117% of their rated voltage.
The logic control system of a computer automatically sequences
logic operations which direct how and when memory stored instructions
and data are processed in the digital registers.
This thesis contains circuit schematics and test results of a
nanosecond response logic - control system for the Galaxy Computer.
The circuit designs...
The GALAXY computer is a large, high speed, general
purpose, digital computer intended to be used for solving
scientific problems. It requires a random access memory
system of 16,384 words of 59 bits each with a cycle time
of one microsecond or less. A memory system capable of
meeting these...
Instruments which combine the features of a digital-to-analog
conversion and a linear-to-logarithmic scale change usually perform
the digital-to-analog conversion first. These instruments are accurate
to within five or ten percent over ranges of five or six decades.
This thesis presents a method which uses combinatorial logic
to perform the linear-to-logarithmic...
This thesis considers the worst-case design of transistor
circuits for the realization of Majority Logic.
First the meaning of Majority Logic is discussed. The requirement
of an odd number of inputs for the realization of Majority
Logic is justified. The usefulness of Majority Logic in synthesizing
a Boolean expression is...
The development of new electronic devices and design procedures
applicable to ternary switching circuits suggests that it might be desirable
to use ternary arithmetic in direct digital control systems.
The advantages of decimal, binary, and ternary arithmetic in digital
computers are discussed and a set of rules for signed -digit...