Metal-insulator-metal (MIM) and dual-insulator MIM (MIIM) devices are used in rectennas, hot-electron transistors, single electron transistors, resistive random access memory (RRAM), and capacitors. The performance of these devices relies heavily on the energy barrier height at each metal-insulator interface. Thus, determination of the in-situ electron energy barrier at each interface...
Low-power millimeter-wave (mm-wave) transceivers are of interest for achieving energy-efficient high data rate short-reach wireless and guided-wave links.
Spatial modulation or space-shift keying (SSK) can provide energy efficiency improvements by using antenna-switching or transmission direction switching for data modulation. Such links are particularly attractive at millimeter-wave frequencies due to small...
Thermodynamic properties of systems are often investigated computationally. Traditionally, thermal physics simulations are limited by their very small energy ranges and slow convergence. Broad histogram algorithms are a class of Monte Carlo algorithms that can explore an entire energy (and temperature) range in one thermal physics simulation: potentially saving months...
Silicon based quantum computing is an attractive approach to large-scale quantum computation due to the significant success of the modern semiconductor fabrication industry. Despite many advances in silicon quantum computing since its inception in 1998, there remains no software for efficiently designing candidate silicon quantum computing devices. Such a development...
Surface waves play a vital role in air-sea interactions, and being able to easily measure them in-situ validates and improves predictive models. Here, we diagnose surface wave properties in the Bay of Bengal using modified vertical SOLO II profiling floats, which are regularly used as part of the Argo ocean...
This work explores the electric field induced strain mechanisms in environmentally benign Bi0.5Na0.5TiO3 (BNT) based piezoelectric thin films. Although BNT-based materials show promise as replacements for toxic Pb-based piezoelectrics, the displacement mechanisms are not consistent between thin films and bulk materials, and the differences have yet to be well understood....
Gamma ray bursts (GRBs) are short, intense pulses of gamma rays that emit radiation in a narrow beam. Unless the beam is oriented towards the observer, it is often difficult to resolve the bursts against the diffuse gamma ray background (DGRB). The DGRB is a measured source of gamma rays...
The formation of carbonaceous and silicate precursor molecules to astrophysical dust grains is investigated. Using density functional theory (DFT) in combination with global optimization techniques, the ground-state binding energies of dust precursors are determined. These results are employed in atomistic nucleation theory (ANT) to predict the critical size and nucleation...
Model Predictive Control (MPC) has previously been investigated on ocean waveenergy converters (WEC) to improve the amount of power captured, while respectingthe system constraints. Previous research done in the same area, focused onbuilding a control scheme by using the knowledge of the past & current statesof the system and predicting...
Aqueous hydroxo Hf nanoclusters enable studies to identify and codify steps in the deposition of Hf-based oxide thin films from solution precursors. HfOCl2 reacts with combinations of H2O2(aq), acids, and TMAH to produce polymetal species at high pH and low pH. X-ray scattering and spectroscopic methods reveal the nature of...
CNTs also offer new opportunities to study new science and develop new technology enabled by their strong electron-electron (e-e) interactions. The lack of dielectric screening inherent in nanoscale structures like CNTs leads to strong e-e interactions, which produce unique physical phenomena. In this thesis, we study the effects of strong...
CIGS and CdTe based commercial thin-film solar cells (TFSCs) require an absorber thickness greater than 2 µm and 4 µm, respectively, to adequately absorb the solar spectrum. To efficiently extract photoexcited electrons, these TFSCs require relatively defect-free absorbers with high-minority carrier mobility (> 100 cm2V−1s−1) and long lifetime (> 10...
Due to the high cost of precursor materials, complex oxides of 4d and 5d transition metals are under-studied compared to their 3d counterparts. Recent studies have shown that oxides containing heavier transition metals can exhibit exotic electronic states due to presence of strong spin-orbit coupling. The goal of this dissertation...
Solid solutions based on the perovskite ferroelectrics Bi₀.₅Na₀.₅TiO₃ (BNT) and Bi₀.₅K₀.₅TiO₃ (BKT) might someday replace current Pb-based ferroelectric and piezoelectric devices. This is one goal of the Restrictions on Hazardous Substances (RoHS) guidelines seeking to limit Pb in consumer devices. Although the Bi-based ferroelectrics are well suited to the task...
Mathematical sophistication increases rapidly as students transition from lower- to upper-division physics courses. Complex algebra is one of the mathematical tools that is not introduced or used in lower-division physics courses but is pervasive throughout upper-division courses. In this dissertation, I study middle-division physics students' developing fluency with complex number...
This research investigates the electronic properties of a fungi-derived pigment, xylindein
as a novel sustainable material for organic electronics. Xylindein molecules were characterized in solution and in film. Absorption spectra and (photo)luminescence spectra were
taken at various excitation wavelengths. Xylindein’s molecular properties were computed
with the Gaussian 09 software suite....
High field time-domain terahertz spectroscopy (TDS) is used to determine the time dependent transmission and the time-delay and optical-power dependent conductivity of a wafer of gallium arsenide (GaAs). Gallium arsenide is a direct band-gap semiconductor and has potential as a computer processor component. Analysis of the transmission of terahertz (THz)...
The Laser Gravitational Wave Observatory, or LIGO, is built to observe gravitational waves as they propagate through space. Advanced LIGO is extremely sensitive
to movements of the test mass as small as 10⁻²¹ m/√Hz , which allows many signals other
than gravitational waves to be detected by the system. Pressure...
In the past few decades, magnetic recording has been used as a dominant solution for massive data storage due to its large capacity, excellent reliability and low cost. Nowadays, exponentially increasing user-generated information is creating a huge demand as well as great challenges for high density data storage solutions. For...
The scattering of optical rays by small spherical particles bears a strong resemblance to the
diffusion of fission neutrons in solid materials. This work explores the feasibility of
exploiting similarities between these two systems for the purposes of reactor component analysis, education, and outreach. After a brief overview of reactor-environment...
While properties are extremely important from an application point of view, it is crucial to have a detailed understanding of the underlying structural influence. Once a concrete correlation between the structure and the observed property is established, rational design of novel materials with optimized properties can be realized. These optimized...
We construct the contact value approximation (CVA) for the pair distribution function,
g(²)(r₁, r₂), for an inhomogeneous hard sphere fluid. The CVA is an average of two radial
distribution functions, which each take as input the distance between the particles, |r₂ −r₁|,
and the average value of the radial distribution...
This thesis presents the results of quantum-mechanical first principles calculations
of optical, electronic and mechanical properties of organic molecules and solids, which have
diverse potential applications such as photovoltaics, flexible electronics, and mechanical
catalysts with applications in force sensors and self-healing materials.
The electronic and optoelectronic properties of organic thin...
The subject of this PhD thesis is part of a research domain of great present interest in new semiconductor materials for photovoltaic and thermoelectric applications. This domain contains the elaboration and the study of both Cu-based chalcogenides bulk and thin-film samples, driven by materials design principles.
One of the most...
Mixed anion compounds that form ZrCuSiAs-type crystal structures exhibit remarkable properties such as superconductivity at low temperatures,
hole conduction with optical transparency in the visible region, and exciton absorption at room temperature. In this thesis, properties of a selected group of materials out of the very large set of mixed...
Piezoelectric materials have been widely used in electromechanical actuators, sensors, and ultrasonic transducers. Among these materials, lead zirconate titanate Pb(Zr[subscript 1‐x]Ti[subscript x])O₃ (PZT) has been primarily investigated due to its excellent piezoelectric properties. However, environmental concerns due to the toxicity of PbO have led to investigations into alternative materials systems....
A new approach to the discovery of high absorbing semiconductors for solar cells was taken by working under a set of design principles and taking a systemic methodology. Three transition metal chalcogenides at varying states of development were evaluated within this framework. Iron pyrite (FeS₂) is well known to demonstrate...
A combination of theoretical perspectives is used to create a rich description of student reasoning when facing a highly-geometric electricity and magnetism problem in an upper-division active-engagement physics classroom at Oregon State University. Geometric reasoning as students encounter problem situations ranging from familiar to novel is described using van Zee...
The materials Fe₂(Si,Ge)(S,Se)₄, Cu₃PS[subscript 4-x]Se[subscript x] (0 ≤ x ≤ 4), and Cu₃PxAs[subscript 1-x]S₄ (0 ≤ x ≤ 1) have been synthesized and studied as new earth-abundant absorbers for single and multijunction photovoltaic cells as well as solar fuel generation. The synthesis, single-crystal growth, and optical and electrical properties of...
In this thesis, I present studies in the field of terahertz (THz) spectroscopy. These studies are divided into three areas: Development of a narrowband THz source, the study of carrier transport in metal thin films, and the exploration of coherent dynamics of quasi-particles in semiconductor nanostructures with both broadband and...
Oxides of post-transition metals often show unique structures and properties due to the presence of lone pair electrons and the diffused s orbitals. The present work focuses on synthesis and characterizations of oxides containing Te, a heavy post transition metal.
New series of pyrochlore oxides of the formula Cs(M,Te)₂O₆ (M...
The central focus of this thesis is the design, fabrication and characterization of amorphous oxide semiconductor (AOS) thin-film transistor (TFT) current mirrors. The thin-film deposition and circuit fabrication methods used to realize zinc tin oxide (ZTO) TFT
current mirrors are addressed in order to elucidate the processing challenges for this...
As the semiconductor industry works to integrate increasingly more "non-CMOS" devices onto CMOS ICs, compact model development has become an important step in the circuit/system verification tool flow. This research focuses on the two- and three-dimensional modeling of the physical phenomena that occur in nanoscale magnetic devices. This includes the...
A method for bandgap energy determination using di use re ection is presented and compared to the traditional integrating sphere method. We have found the bandgap energies of ZnO, TiO₂, Cu₂O, Si, SnZrS₃, SnZrSe₃, Sn₂S₃, and BiCuOSe powders with both methods and found they agree within 0.03 eV. We have...
Crystals of an incongruent-melting compound, Ba₃MgSi₂O₈, were grown by the flux method and its structure was determined by single crystal X-ray diffraction methods. Ba₃MgSi₂O₈ crystallizes in trigonal space group P-3[bar]m1 with a = 5.6123(3) Å, c = 7.2667(9) Å and Z = 1. Eu²⁺ ions prefer one crystallographic Ba site...
This dissertation outlines two approaches for improving the efficiency and reducing the cost of photovoltaic energy generation. First, the structures of known binary copper and iron compounds are used to choose the promising compositions Fe₂XS₄ (X = Si, Ge), Cu₃TaQ₄ (Q = Se, Te), and BaCuQ'F (Q' = S, Se,...