The influence of weather on the long range radio navigation system Loran-C was investigated. The variables analyzed over a period of 255 days were: time differences (TDs), TD signal-to-noise ratios, TD standard deviations (measured at a fixed receiver location in Corvallis, Oregon), time interval numbers (TINOs) (measured at the transmitter...
An important task of a Variable Speed Generation (VSG)
system is the capability to maintain and control the terminal
voltage at some desired value as determined by the
reactive power dispatch strategy.The main objective is to
design a sub-optimal fixed-parameter controller in the
sense that constraints with respect to practical...
The rapid development of semiconductor technology and the increasing complexity of VLSI chips have prompted both the industry and the
academic community alike to take an indepth look at the VLSI design
problem. Many design methodologies have been proposed and associated
computer-aided tools developed. This thesis is a study of...
Linear phase variable filters that are obtained with a frequency transformation of the form cos(ω) = P(cos(W)) were analyzed, where P is a finite degree polynomial, ω is the prototype frequency and W is the transformed filter frequency. A new transformation of third order is proposed. The new variable filter...
The suitability of discrete least-squares optimal (Wiener) filters
for deconvolution of tone-burst waveforms is studied. It is shown
that: (1) such waveforms are not well suited to these filters without
preprocessing, (2) the use of exponential weighting results in a significant
improvement in filter performance and (3) that "phase-unwrapping"
in...
Two-way transmission of data on broadband community cable television systems is considered in this thesis. A discussion of the data transmission environment is presented which attempts to characterize the channel noise and interference which degrades data transmission performance. The analysis considers channel degradation resulting from additive gaussian noise and various...
Rapid advances in technology have seen computing move from a
large central computer to desktop microcomputers.
This advance was also
seen in the design of dedicated computers, computers designed to perform a
few specialized tasks or duties.
These computers, or microcontrollers, are
often controlled by a central computer and themselves...
This thesis reports on an investigation of the growth, by
Molecular Beam Epitaxy, of III,III-V ternary compound semiconductors.
Strained and unstrained growth was studied via the deposition of InGaAs
on GaAs and InP substrates. Lattice matched InGaAs on InP was grown,
and an in situ method was developed to find...
The doubly-excited machine can be used as a variablespeed
generator or as a variable-speed-drive motor. In
this thesis the focus is on the aspects associated with
generating electric power (real and reactive) from erratic
energy resources such as water or wind. In such cases,
the power input to the prime...
This thesis describes the design of a single-chip
logic analyzer. The utility of such a chip in measuring
and recording digital system parameters is illustrated.
Possibilities for future applications of this chip in
performance monitoring of computer systems are discussed.
The objective of this thesis is to describe the design and
implementation of a VSLI reduced instruction set computer (RISC).
The RISC machine constitutes a new style of computer architecture.
It differs significantly from the complex instruction set computer
architectures (CISC) of the past. RISC architectures are
characterized by their...
Sorting is typically a compute intensive operation used in many
areas of industry. With improved technology, both in the VLSI and CAE
areas, we can afford to develop hardware based database computers to
move the work load off the main computer. In this thesis the
architecture of a VLSI parallel...
This thesis is concerned with the development of a unique
parallel sort-merge system suitable for implementation in VLSI.
Two new sorting subsystems, a high performance VLSI sorter and a
four-way merger, were also realized during the development
process. In addition, the analysis of several existing parallel sorting
architectures and algorithms...
In microwave network analysis, proper matching of the measurement system is necessary to prevent measurement errors and provide a
proper terminating impedance for the device-under-test. To obtain
this matching, a buffer amplifier is often used in the first stage of
the network analyzer.
This study describes the design and analysis...
Team pursuit-evasion games are studied here with one performance
index for the team as a unit in competition with one common opponent.
Particular structures of team games are discussed after a brief introduction
of the two-player differential games. The classical calculus
of variations is used to derive the feedback strategies...
This thesis discusses a special type of a versatile, distributed control system, the Taskmaster II. It includes a detailed specification of a readily realizable Taskmaster system utilizing a layered communication among units, oriented on the ISO OSI seven layer model. The specification was developed from the analysis of previous research...
The problem of synchronization arises in the interaction among
digital systems not sharing a common clock reference. The reliability of synchronizers is related to metastable operation of
bistable elements. Because of its subtle nature, the phenomenon
until recently was not widely researched. However, the literature
now contains a sound theoretical...
An analytical expression is derived which allows the
bulk minority carrier recombination lifetime, t, and the
surface recombination velocity, S, to be extracted from a
single noncontact photoconductivity decay (PCD) measurement. This analytical expression is rather complex, but
can be reduced to a first order approximation. The first
order approximation...