Thin films of wide band-gap semiconductors are deposited by the pulsed laser deposition method. Optimal deposition parameters for the individual compounds are reported. A family of p-type BaCuQF (Q = S, Se, Te) ceramics with a layered crystalline structure is investigated for active and passive device applications.
Epitaxial films of...
Bulk properties of CuSc₁₋ₓMgₓO₂, CuSc₁₋ₓMgₓO₂₊y, BaCu₂S₂, Bai₁₋ₓKCu₂S₂, BaCu₂Se₂
and Bai₁₋ₓKₓCu₂Se₂ are investigated supporting the search for highly conductive p-type
thin films. Mg is an efficient dopant in CuScO₂ with conductivity up to l.5.10⁻² S/cm.
Oxidation of CuScO₂:Mg leads to further increase in conductivity up to 0.5 S/cm. The
amount of...
Transport and structural properties of Mg-doped and O-intercalated sintered powders and
polycrystalline films of CuSc₁₋ₓMgₓO[subscript 2+y] are reported. Substitution of Mg for Sc systematically
increases the p-type conductivity in CuSc₁₋ₓMgₓO₂ sintered powders, producing a maximum
conductivity of 0.015 S/cm at x≈0.06. A similar level of conductivity is observed in transparent...
Zinc tin oxide (ZTO) films deposited by pulsed laser deposition (PLD) are
investigated as a channel layers for transparent thin-film transistors (TTFTs).
Films are deposited on glass for characterization, and transistor channel layers are
deposited onto aluminum oxide-titanium oxide/tin doped indium oxide/glass
substrates (ATO/ITO/glass) to produce TTFTs.
UV-visible spectroscopy on...
The work presented here is focused on applying basic principles of solid-state chemistry to the study and development of new wide band-gap semiconductors and insulators for photovoltaic and electronic-device applications. Analysis of crystal structure, band structure, optical band gap, morphology and transport properties provides fundamental insight into materials performance as...
New transparent p- and n-type semiconductors and luminescent materials have been prepared and characterized. Synthesis, structures, optical and electrical properties of new chalcogenide fluoride p-type transparent semiconductors MCuQF (M=Ba, Sr; Q=S, Se, Te) are described. Band-gap tuning and improvement in conductivity through p-type doping are demonstrated in the family. The...
The origin of high hole conduction in BaCuQF (Q=S,Se) was investigated by photoemission
measurements and full-potential linearized augmented plane wave band-structure calculations. In
both compounds, the large dispersion near the top of the valence band is realized by admixed states
of Cu 3d and S 3p or Se 4p orbitals,...
Thin films of the p-type semiconductor, barium copper sulfide fluoride (BaCuSF) were deposited using pulsed laser deposition. Similar p-type conductivity in Cu2O is caused by copper vacancies. Addition of copper dopant is proposed as a method for filling the copper vacancies in BaCuSF. The films are characterized to determine quality...
The preparation and characterization of thin film oxides and chalcogenides by pulsed laser deposition (PLD) is presented. An overview of fundamental PLD concepts are presented and are followed by a description implementation and development of the PLD systems at OSU. We present the results of thin film growth of high...
Two different doping techniques, oxygen intercalation and Mg cation
substitution, were investigated in thin film p-type CuScO₂, a wide band gap
semiconductor with the delafossite structure. Films rf-sputtered onto amorphous SiO₂
substrates were polycrystalline after post-deposition annealing. X-ray diffraction was
used to determine that the films are predominantly polycrystalline 3R...
The primary objective of this thesis is to explore new absorber and p-type window layer materials for thin-film solar cell applications. A new thin-film electron beam deposition system has been installed, is now operational, and has been used to deposit several types of solar cell absorber layers. Material investigations include...
The primary focus of this thesis involves modeling and development of p-type thin-film transistors (p-TFTs), moving towards the realization of a filly transparent thin-film transistor (TTFT). The modeling portion of this thesis emphasizes the development of physics-based TFT models, specifically focusing on the elucidation of non-ideal current-voltage characteristic behavior. A...
The Seebeck coefficient is examined in the high temperature limit, using an approach based on a grand partition function containing Hubbard Hamiltonian interaction terms. Although the carriers of interest occupy localized Wannier states, this work is prefaced by the case of delocalized Bloch states, which is examined using Boltzmann transport,...
This thesis focuses on two aspects of transparent electronics, SnO₂ transparent thin-film transistors (TTFTs) and transparent circuits. Both depletion- and enhancement-mode SnO₂ TTFTs are realized. The maximum effective mobility for the depletion- and enhancement-mode devices are 2 cm²V⁻¹s⁻¹ and 0.8 cm²V⁻¹s⁻¹, respectively. A variety of techniques to decrease the carrier...
Solid state luminescent sulfides are prepared as powders in order to elucidate the relationship between structure and light emission. While the sulfides studied in this dissertation are known phosphors, materials are investigated in a variety of new ways. Elementary properties and structures of MgS are reviewed, and preparation of MgS...
The variegated aqueous chemistries of metal cations are applied to the design and synthesis of non-toxic solution precursors suitable for additive printing of large-area oxide electronics. Polycondensation behaviors of aqueous Al+3 and PO4 +3 are manipulated in the deposition of atomically smooth amorphous aluminum oxide phosphate (AlPO) dielectric films. AlPO...
The aim of this dissertation is to develop oxide semiconductors by radio-frequency
sputtering for thin-film transistor (TFT) applications. A variety of oxide semiconductors
are used as the TFT channel layer, including indium gallium oxide (IGO), zinc tin
oxide (ZTO), and indium gallium zinc oxide (IGZO). The variety of materials used...
The Gd3+ ion has been used to induce quantum splitting in luminescent
materials by using cross-relaxation energy transfer (CRET). In Nd:LiGdF4, quantum
splitting results from a two-step CRET between Gd3+ and Nd3+, first involving a
transition 6G→6I on Gd3+ and an excitation within the 4f3 configuration of Nd3+
followed by...
The results of an investigation into carrier dynamics in several novel functionalized and solution-processable pentacene and anthradithiophene derivatives are reported. Measurements were made of real-time photoresponse of polycrystalline thin films of these materials to ultrafast laser pulses, on picosecond to microsecond time-scales, as well as measurements of dark current and...