Index Catalog // ScholarsArchive@OSU

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Creator:: Bozeman, Scott C.
Abstract:: Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
Resource Type:: Masters Thesis
Full Text:: , doi: 10.1016/j.jmatprotec.2019.05.024. [17] P. Murkute, S. Pasebani, and O. Burkan Isgor

Evaluation of the Efficiency of Supplementary Cementitious Materials to Prevent Alkali-Silica Reaction in Concrete with Highly and Very Highly Reactive Aggregates

Creator:: Chopperla, Krishna Siva Teja
Abstract:: The most common test methods to evaluate alkali-silica reaction (ASR), the concrete prism test (CPT) and the accelerated mortar bar tests (AMBT), have limitations and are not entirely reliable in terms of predicting the performance of concrete with prevention measures under field conditions. In this study, the miniature concrete prism...
Resource Type:: Dissertation
Full Text:: world. I would also like to thank Dr. Burkan Isgor and Dr. W. Jason Weiss. Your passion towards

Synthetic Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature

Creator:: Marr, Carter J.
Abstract:: The goal of this paper is to evaluate how synthetic lubricants perform in an enclosed gearbox application when compared with a proven mineral oil. This is in an effort to improve gearbox efficiency with the desired effect of lower emissions from of improved energy output from power generation. Four liquid...
Resource Type:: Masters Thesis
Full Text:: Jones, Karl R. Haapala, O. Burkan Isgor, John Parmigiani 4 Chapter 2: Lubrication performance

Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

Creator:: Quintana, Xavier A.
Abstract:: Molten salts have been targeted as a promising coolant for next generation reactors due to their high boiling point, heat capacity, and thermal conductivity. Despite these benefits, molten salt systems present unique materials compatibility issues, highlighted by the aggressive corrosion attack and dealloying typically seen on materials in these environments....
Resource Type:: Masters Thesis

Design and Shakedown Testing of an Aqueous Dynamic Reference Electrode

Creator:: Brackbill, Anneli
Abstract:: For next-generation molten salt reactors, there is a need to be able to characterize the corrosion of the molten salts contained within them. One such tool that may be used to accomplish this is a dynamic ref- erence electrode, or DRE. Here, an aqueous dynamic reference electrode (aDRE) was developed,...
Resource Type:: Honors College Thesis
Full Text:: Nuclear Science & Engineering Burkan Isgor, Committee Member, representing School of Civil & Construction

Generalized Chip Formation and Thermal Dynamics of Modulated Turning

Creator:: Ozdemir, Mert
Abstract:: Modulation assistance is widely employed to improve chip management in turning. This process is also known as modulated turning. Modulated turning transforms continuous cutting into intermittent cutting by periodically disengaging the tool tip from the workpiece, resulting in the generation of short, easily managed chips. This novel method improves the...
Resource Type:: Masters Thesis

Investigating Accelerated Carbonation Methods for Sequestering CO₂ into Lime Treated Soils

Creator:: Moore, Jaxom
Abstract:: Civil engineers frequently use lime to improve the mechanical properties of weak clayey soils. The production of lime is associated with significant CO₂ emissions. Sequestering carbon dioxide into the stabilized soil can effectively reduce the carbon footprint of the lime. In the presence of CO₂, unreacted lime in the stabilized...
Resource Type:: Masters Thesis
Full Text:: 𝐶𝑎𝑂 + 𝐻 𝑂 → 𝐶𝑎(𝑂𝐻) 2.2 To stay on target for the emissions goals outlined in the Paris

In-Situ Confocal Scanning Laser Microscopy and Post-Exposure Analysis of a Cu/Fe-based Oxygen Carrier Material in High-Temperature Oxidation and Reduction Environments for Chemical Looping Combustion Applications

Creator:: Nealley, W. H. Harrison
Abstract:: A Cu/Fe-spinel-based oxygen carrier designed at the National Energy Technology Laboratory was studied in order to characterize its physical and chemical behavior with cyclic oxidation and reduction treatments at 800°C for applications in chemical looping combustions. Observations were made on individual particles of the oxygen carrier in-situ using a confocal...
Resource Type:: Masters Thesis
Full Text:: showing predicted phases of the Cu-Fe-O system for a range of oxygen partial pressures at 800°C

Understanding And Improving The Activity Of Oxygen Evolution Reaction Catalysts In Alkaline And Chloride-Containing Electrolytes

Creator:: Adiga, Prajwal Prakash
Abstract:: Water electrolysis plays a pivotal role in achieving a green hydrogen economy by sourcing electricity from intermittent renewable sources. However, the efficiency of the electrolysis process is limited by the sluggish oxygen evolution reaction (OER) kinetics, whereas the kinetics of the hydrogen evolution reaction (HER) are more facile. This thesis...
Resource Type:: Dissertation
Full Text:: , Dr. Chih Hung Chang, and Dr. Burkan Isgor for supporting me through this journey of working towards

Corrosion Resistance of Alloys in Direct-Fired Supercritical CO₂ Power Cycle Aqueous Environments

Creator:: Repukaiti, Reyixiati
Abstract:: Using supercritical CO₂ (sCO₂) as a working fluid has increasingly gained attention in the energy industry. sCO₂ power cycles has various advantages, such as high cycle efficiency, compact turbomachinery, and potential zero CO₂ emission. Along with these benefits, materials degradation issues have also been emphasized in the last decade. Aqueous...
Resource Type:: Dissertation
Full Text:: time to teach and mentor me. I’d also like to extend my gratitude to Dr. Burkan Isgor for mentoring

ScholarsArchive@OSU

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Evaluation of the Efficiency of Supplementary Cementitious Materials to Prevent Alkali-Silica Reaction in Concrete with Highly and Very Highly Reactive Aggregates

Synthetic Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature

Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

Design and Shakedown Testing of an Aqueous Dynamic Reference Electrode

Generalized Chip Formation and Thermal Dynamics of Modulated Turning

Investigating Accelerated Carbonation Methods for Sequestering CO₂ into Lime Treated Soils

In-Situ Confocal Scanning Laser Microscopy and Post-Exposure Analysis of a Cu/Fe-based Oxygen Carrier Material in High-Temperature Oxidation and Reduction Environments for Chemical Looping Combustion Applications

Understanding And Improving The Activity Of Oxygen Evolution Reaction Catalysts In Alkaline And Chloride-Containing Electrolytes

Corrosion Resistance of Alloys in Direct-Fired Supercritical CO₂ Power Cycle Aqueous Environments

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Search Constraints

Search Results

Limit your search