Development of efficient methods for the destruction of solid wastes and recovery of valuable resources is needed to support long-duration manned missions in space. In particular, these technologies are required for deployment in hypogravity and microgravity environments, such as at the lunar or Martian surfaces. Gradient Magnetically Assisted Fluidized Bed...
CuGaSe₂/CuInSe₂ tandem junction solar cell is currently being pursued to be a low cost and high efficiency renewable energy source. A reported theoretical efficiency of 33.9% solar cells has been the motivation to fabricate CuGaSe₂ films in a simple and low cost method. Electrodeposition is a potentially suitable method to...
The increasing occurrence of aluminosilicate caused complications in krafi pulp mills can be attributed to the closing of purge points and the expanded use of contaminated feedstocks and recycled fiber sources. An active purge of aluminum and silicon from the chemical recovery cycle must be undertaken in order to maintain...
We have performed fluorescence extended X-ray absorption fine structure (EXAFS) measurements on the Cd K-edge of partial electrolyte (PE) treated Cu(In[subscript 0.7]Ga[subscript 0.3])Se₂ (CIGS) thin film samples using synchrotron X-ray radiation. This data was compared to the EXAFS spectra of CdSe and CdO standards. Cd local structure models were constructed...
Weyerhaeuser's Paper Mill in Albany, Oregon has been experiencing frequent ring formation in the #3 rotary lime kiln. Rings form when lime mud (CaCO₃) or product lime (CaO) particles adheres to the walls of the lime kiln and become resistant to the abrasive action of the sliding motion of product...
Diatoms are single celled algae that form cell walls made primarily of silicon
dioxide (SO₂). The metabolic machinery that gives diatoms the ability to biogenically
form highly ordered solid silica from soluble silicon extracted from their external
environment provides a unique platform to create novel nanostructured materials
inexpensively and with...
Plasma etching of polymers is an important process in the fabrication of
integrated circuits, printed circuit boards and other emerging technologies. High rates
can be obtained using oxygen diluted with a fluorine-containing gas, most commonly
CF₄. In this thesis, two less studied fluorinated gases, NF₃ and SF₆ are investigated.
Polyphenylene...
The effect of unsteady thermocapillary convection on the mass transfer rate of a solute between two immiscible liquids within a rectangular microscale channel with differentially heated sidewalls was numerically investigated. A computational fluid dynamic code in Fortran77 was developed using the finite volume method with Marker and Cell (MAC) technique...
Sodium hyaluronate (HA) is a polysaccharide found in all parts of the body
Although it performs important functions in the eye, the coagulation process
and other parts of the body, its contribution to synovial fluid is particularly
important. As the major component of synovial fluid, HA is responsible for
the...
Nanoparticles, materials on a 10⁻⁹ meter size scale, are finding applications in
a variety of areas including catalysts, fuel and solar cells, biological labeling.
electronics and optoelectronic devices. Semiconductor nanoparticles are of particular
interest because of their size tunable properties resulting from quantum confinement
effects. Mass productions of monodisperse semiconductor...
The surface tension kin'ti4tnd ste'dy state behavior exhibited by mixtures of selected
surfactants with a recombinant Factor VIII (rFVIII) were evaluated with automated
interfacial tensiometry. In particular, fresh solutions of rFVIII with different concentrations
of Tween 80, sodium dodecylsulfate (SDS), or dodecyltrimethylammonium bromide
(DTAB) were prepared and their surface tension...
Adipic dihydrazide-modified heparin was prepared and
subsequently immobilized on surface-activated silica wafers. X-ray
photoelectron spectroscopy (XPS) was used to quantify the elemental
composition of the silica surface at each stage of activation and results
showed that successful immobilization had taken place. Contact angle
measurements were made to verify the high...
Heparin was modified with adipic diliydrazide and covalently linked to surface-activated silica. Contact angle measurements were made to determine changes in surface at various stages of the derivatization. Xray photoelectron spectroscopy was used to analyze the elemental composition of the surface at each step of immobilizing heparin as well and...
With the dominance of polyethylene as the building material for America's natural gas distribution system and a growing demand for natural gas, there exists and ever increasing need for improved methods of repairing damaged natural gas distribution pipe. This paper serves as the ground work for a multi-part study seeking...
