Tsunami inundation of coastal communities can impose a wide array of forces on the
built environment. Forces generated by tsunami-driven debris damming have the potential to
cause failure of coastal structures and further accumulate flow-entrained debris. Since tsunami-resilient design standards were adopted by ASCE in 2016, debris damming considerations have...
When pavement markings on roadways are removed, scarring can occur leaving behind traces of where the marking used to be called ghost lines. These ghost lines can confuse drivers on the roadway and divert their attention from the correct lane markings leading them into the false lane. Previous research has...
Wildfires are a recurring disaster that threatens communities living close to forests and result in significant financial losses along with negative environmental effects, especially with the increase of wildfire season length and intensity due to climate change and increasing urbanization. Wildfire events can also have a significant impact on the...
Salt-encrusted flats, or Sabkha, are common in arid and semi-arid regions worldwide, including coastal and inland areas. Due to their low shear strength and high compressibility, these soils are often unsuitable for supporting infrastructure or structures. The unique salt content of sabkha formations sets them apart from other soil types....
Aligning Real-Time Networks (RTNs) with the National Spatial Reference System (NSRS) is crucial to ensure accuracy, consistency, interoperability, and long-term data integrity for geospatial applications. However, the effectiveness of different alignment methods as well as the need for monitoring approaches to maintain alignment consistency with the NSRS have not yet...
To facilitate the design of Natural and Nature-Based Features (NNBF) for flood protection, this thesis expands an existing engineering design methodology to NNBF systems. The existing approach is a Level III reliability method for the performance-based design of traditional coastal engineering systems. The expanded methodology incorporates uncertainties inherent to both...
Walking is the single most universal mode of transportation in the world, but being a pedestrian exposes a traveler to high risk. Historically, pedestrians have consistently experienced disproportionately high rates of fatalities and severe injuries in traffic crashes. Research has probed into factors influencing pedestrian crash injury severity outcomes, but...
Ice–ocean interactions have profound consequences for the ocean and climate, influencing the rate of sea level rise. Submarine melt is commonly parameterized using a three-equation formulation for the heat, salt, and momentum conservation equations coupled to a buoyant plume model, together called plume-melt theory. However, recent direct observations of terminus...
Reinforced concrete (RC) column-footing substructures are widely used to support bridges along critical transportation corridors in Oregon. Those built prior to 1971 were typically designed to resist only gravity loads. Therefore, they are vulnerable to damage or collapse during strong ground shaking. To prevent collapse, seismic retrofits have been developed...
Concrete has been categorized as a key contributor of CO2 (carbon) emissions into the atmosphere. This is mostly associated with the production of ordinary portland cement (OPC). The concrete and cement industries are pursuing a path to reduce their carbon emissions generally in accordance with the climate change goals outlined...
Wave energy converters (WECs) show promising potential to significantly contribute to global renewable energy goals. Numerous WEC designs have been proposed and investigated, but wave energy conversion technology has yet to reach convergence in the same way wind or solar has. Of the designs currently in existence, surface-piercing WECs are...
The onset of the COVID-19 pandemic led to significant transformations in global mobility patterns, primarily driven by stay-at-home orders and economic shutdowns. These measures resulted in a substantial decline in travel activities worldwide. In the United States, there was a notable reduction in travel demand, with a corresponding decrease in...
High early strength concrete (HESC) allows for faster construction with less impact on traffic, thus reducing the indirect costs associated with a project. There are multiple methods for achieving early strength, such as alternative cements like calcium sulfoaluminate (CSA) or chemically accelerated portland cements. The standard criteria for an HESC...
Wind energy has become a crucial resource in sustainably meeting increasing global energy demands. Recently, offshore wind energy has been gaining traction due to its higher gross resource and larger unclaimed real-estate relative to its onshore counterpart. Floating offshore wind turbines (FOWTs) are increasingly popular, particularly designs with semisubmersible platforms....
Transportation agencies continuously strive to improve driving quality and highway safety, which are both highly correlated with the level of smoothness of the road. The International Roughness Index (IRI) is a widely adopted, standardized metric calculated from longitudinal profile data collected on the road. Inertial profilers are devices mounted to...
Microbial-induced corrosion of concrete (MICC) is a multi-stage deterioration process caused by microbial activity in wastewater infrastructure. MICC is a worldwide issue due to the reduced service life of the wastewater infrastructure and the economic impact associated with increased maintenance and reconstruction costs. This thesis explores two critical aspect of...
Civil engineers frequently use lime to improve the mechanical properties of weak clayey soils. The production of lime is associated with significant CO₂ emissions. Sequestering carbon dioxide into the stabilized soil can effectively reduce the carbon footprint of the lime. In the presence of CO₂, unreacted lime in the stabilized...
The Manual on Uniform Traffic Control Devices prohibits positioning a bike lane right-adjacent to a vehicle turn-only lane to mitigate the potential for right-hook crashes. However, it provides no specific guidance on positioning with respect to bus-only lanes. This thesis describes a before/after safety evaluation of bike lanes positioned left...
Most of the concrete in the world is produced using hydraulic cement (ordinary portland cement, OPC) and siliceous or alumino-siliceous supplementary cementitious materials (SCM). Due to the shift in focus toward environmental sustainability within the construction industry, alkali-activated cementitious systems (AAC) have gained significant attention to reduce the carbon footprint...
A curb ramp is an indispensable ramp system in the transportation network that provides a transition between a sidewalk and a roadway. The Americans with Disabilities Act (ADA) requires that the design, construction, and maintenance of curb ramps meet the ADA standards. However, many existing curb ramps are noncompliant, as...