The main objective of this research study is to incorporate construction worker safety and health into sustainable design and construction practices. This can be fulfilled by the development of an innovative construction worker safety and health planning tool, called Sustainable Construction Safety and Health (SCSH) Rating System that will:
•...
Metal and hydrogen ion acidity and extreme nitrate concentrations typical of
Department of Energy (DOE) legacy waste sites pose formidable challenges to
successful implementation of in situ bio-immobilization. Intermediate-scale (~ 2.5 m),
flow through models of an in situ bio-barrier were constructed to investigate U and Tc
removal from groundwater...
This research examines the downstream fining phenomenon as it operates in coastal gravel-bed rivers of Oregon. Downstream fining is a change in bed composition toward smaller sediment sizes in the downstream direction. Changes in stream flow discharge and channel slope affect the rate of bed-load transport, thereby altering the downstream...
Forest roads produce fine sediment with traffic during wet weather. If the forest road is connected to a stream it can be a source of turbidity and fine sediment that may be detrimental to aquatic organisms especially salmonids.
The goal of this work was to investigate turbid runoff during wet-weather...
More than 65,000 organic chemicals are currently in commercial production with
approximately 1000 added each year. Many chemicals are released into the environment as organic mixtures derived from complex hazardous or solid wastes. Of these, more than 1000 chemicals are of environmental concern because of their production quantities, toxicity, persistence,...
Despite recent efforts to improve site safety, construction still accounts for a disproportionate injury and illness rate. According to the 2007 injury and illness data released by the National Safety Council, the construction industry has a fatality and disabling injury rate that is approximately three times higher than the all-industry...
Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Structural design codes have evolved continuously since modern codes were established. The allowable stress design format has been widely used since the late 191h century. During the past two decades, probability-based limit states design concepts have evolved and are increasingly being used for various material and structural types. Limit state...
Sediment transport in a gravel-bottomed stream located in the Oregon Coast Range was studied to determine the effects of a single
layer of large particles (the armour layer) located at the surface of the bed material. The bed load transport system was studied jointly with suspended sediment transport to understand...
Two hilislope sites in the central Oregon Coast Range were instrumented and monitored for winter precipitation and saturated and unsaturated subsurface conditions. The study sites were near-ridge depressions typically known as headwalls. Based on results of the monitoring, two existing mathematical models
were adapted to predict piezometric levels in headwalls...
Chromium and its compounds are widely used by modern industries, resulting in large quantities of this element being discharged into the environment. To remove chromium from contaminated soils and ground water, it is necessary to predict chemical and physical processes that control the rate of reactions and transport of chromium...
This thesis explores the factors limiting the alkene substrate range of the vinyl chloride (VC)-utilizing bacteria, and describes a method for measuring VC transformation in situ. Vinyl fluoride (VF) was evaluated as a surrogate for monitoring aerobic VC-transformation utilizing three isolates, Mycobacterium EE13a, Mycobacterium JS60 and Nocardioides JS614. JS614 grew...
Studies were undertaken of the adsorption of chlorinated phenols from aqueous solution on granular activated carbon (Filtrasorb-400, 30x40 mesh). Single-component equilibrium adsorption data on the eight compounds in two concentration ranges at pH 7.0 fit the Langmuir equation better than the Freundlich equation. The adsorptive capacities at pH 7.0 increase...
Initially, a small experimental study was undertaken to examine the influence of incline on the frequency of taut cables. The experiments consisted of exciting a short cable at angles of incline from zero to 90 degrees and at various tensions. The results from these experiments shows a small effect due...
Wave breaking in the surf zone is an important forcing
mechanism on the generation of nearshore currents and in the driving
of sediment transport. At the same time, wave breaking can have
significant spatial and temporal variability that needs to be
accounted for in the description of nearshore processes. Remote...
This research focused on anaerobic transformation of trichloroethene (TCE), a
groundwater contaminant. The mixed anaerobic Evanite culture (EV) was studied to determine community behavior and composition responses to different electron donors and chloroethene electron acceptors. The potential toxicity from high concentrations of TCE and its daughter product cis-1,2-dichloroethene (cDCE) was...
This research analyzes the effects of islands on river process and the effects river processes have on island formation. A fluvial island is defined herein as a land mass within a river channel that is separated from the floodplain by water on all sides, exhibits some stability, and remains exposed...
Hydrodynamic models are used as a diagnostic tool to understand the temporal variability of shallow-water processes that are difficult to completely resolve with traditional field measurements. For all simulations, modeled quantities are qualitatively or quantitatively compared with available measurements to gain confidence in conclusions derived from the modeled results. In...
Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
The Horsetail Creek (HC) bridge is an example of an Oregon bridge that was classified as structurally deficient and was not designed to withstand earthquake (EQ) excitations. A fiber-reinforced polymer (FRP) rehabilitation was performed on the HC bridge to increase flexural and shear capacities for traffic loads. However, a seismic...
Recently, the concept of performance based design has become popular for many types of structures, including port facilities under seismic loading. For the case of pile-supported wharves, the level of performance is generally estimated using the displacement capacity of the structure. Therefore, understanding soil-pile interaction is one of the most...
A new set of data from a large-scale sand bar migration experiment is presented. During this experiment, two sandbars were generated. One of the bar was generated by the action of undertow, and sediment moved offshore. The other bar was generated by the shoreward movement of sediment coming from the...
Due to age, original design that is deficient by modern standards, inadequate maintenance, environmental conditions, and increasing loads, large numbers of bridges in United States and elsewhere are classified as deficient and in need of rehabilitation or replacement. According to a national bridge inventory established by the Federal Highway Administration,...
Non-destructive testing methods and applications have become of increasing interest due to the worldwide aging and deteriorating infrastructure network. In the field of Civil Engineering, bridges and bridge components as well as non-structural elements such as roadway pavements for example, are affected. In particular, the Acoustic Emission (AE) technique offers...
The evaluation of pavement condition is an important part of pavement
management. To evaluate a pavement, a distress survey has been performed mainly by
manual field inspections. Several automatic pavement evaluation systems have been
developed to overcome the drawbacks of field inspections. Automated evaluation
systems, however, imply their own limitations...
Temperature is one of the most important factors
affecting microbial activity and consequently is of great
importance in a biological waste treatment system. Extensive
research has been carried out to determine the
effects of temperature on biological reactions in the temperature
range of 20° to 35° Centigrade. It is generally...
This work furthers the understanding of processes occurring in catchments that affect stream nitrate concentrations using two different approaches: a temporally intensive case study of three headwater catchments with varying land use (through storm event monitoring) and a spatially intensive study on the regional scale (through statistical modeling) of 1st-4th...
The rural two-lane highway in the southeastern United States is frequently associated with a disproportionate number of serious and fatal crashes. The major research objectives are to investigate the relations between probabilities of fatal crash type occurrence and potential contributing factors from road geometric design characteristics and roadside, environmental features....
Probability-based reliability methods have placed an increased emphasis on realistic simulation of structural behavior in bridge engineering. Uncertainty is present in every aspect of structural analysis. Aleatory uncertainties in the loading and load-carrying capacities, and epistemic uncertainties in mathematical idealization of bridge systems are the major contributors to uncertain structural...
Different specimen preparation methods such as moist tamping, dry funnel deposition, slurry deposition, dry air pluviation have been reported in the literature to investigate the undrained behavior of silty sands. Similarly, different means have been used to densify the soils prepared with such methods. However, the influence of the densification...
This research focused on the enhanced reductive dechlorination of trichloroethene (TCE) and its surrogate, trichlorofluoroethene (TCFE), using two bioremediation methods in anaerobic conditions. Two anaerobic bioremediation studies were conducted to investigate the effects of microbial communities in the presence of different electron acceptors and donors during anaerobic reductive dechlorination of...
A commercially available, three-dimensional (3-D) finite-element (FE) analysis
program was used to model metal-plate-connected (MPC) joints in wooden trusses.
The model's features included consideration of material properties, teeth-to-grain-to-direction-
of-force orientation, and wood-to-wood contact. Non-linear spring elements,
placed on the wood surface between wood and plate, were used to represent wood-to-teeth...
Fluid-structure interaction (FSI) is an interesting and challenging interdisciplinary area comprised of fields such as engineering- fluids/structures/solids, computational science, and mathematics. FSI has several practical engineering applications such as the design of coastal infrastructure (such as bridges, levees) subjected to harsh environments from natural forces such as tsunamis, storm surges,...
This dissertation presents the results of a research effort conducted to better understand the stress-strain, volume change, shear band formation, and strength characteristics of normally consolidated anisotropic clay under fully three-dimensional stress states. A series of consolidated drained true triaxial tests with a constant mean effective stress and constant Lode...
This study investigated complete reductive dechlorination of chlorinated aliphatic hydrocarbons (CAHs) over a broad range of concentrations. Tetrabutoxysilane (TBOS), as a slow-release anaerobic substrate, was studied for enhanced reductive dechlorination of tetrachioroethylene (PCE) present as a dense non-aqueous liquid (DNAPL). Four different site-mixed cultures were used in the study: Site-300...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
Pile supported bridges are typically constructed near or in a natural or man-made
slope and are subjected to lateral loading. The current design method for laterally loaded
piles involves the use of Winkler's spring concept with the standard nonlinear p-y curves.
The available p-y curves were developed based on results...
Aerial photography provides a method of analyzing dispersion
of wastes that are discharged into the ocean. This method is more
comprehensive than conventional boat sampling in dispersion studies.
The photographic technique permits waste concentrations to be
measured throughout the plume in one instant; thereby allowing the
diffusion analysis to be...
In this dissertation the interactions between hydrodynamics, sediment suspension and transport, and morphological evolution in the surf zone was investigated with a large-scale laboratory experiment data, CROss-Shore Sediment Transport Experiment (CROSSTEX). The data set included comprehensive measurements of water surface elevation, fluid velocity, sediment concentration, and morphology for irregular waves...
Halogenated organic compounds have had widespread and massive applications in industry, agriculture, and private households, for example, as degreasing solvents, flame retardants and in polymer production. They are released to the environment through both anthropogenic and natural sources. The most common chlorinated solvents present as contaminants include tetrachloroethene (PCE, perchloroethene)...
A numerical model for the simulation of fully-coupled fluid-structure
interaction is developed in this study. In modeling the fluid, the Reynolds
Averaged Navier-Stokes equations are solved for an incompressible viscous
fluid field and a k-ε model is employed for turbulence computations.
Hydrodynamic forces obtained by the integration of the fluid...
Laboratory data of free surface elevations and fluid velocities were
obtained using a laser-Doppler velocimeter for the case of a periodic wave
plunging over an impermeable, steep (1:10) slope with a fixed bottom roughness.
The measurements were conducted over 15 cross-shore locations from the outer
surf zone to the swash...
The cyclic resistance of predominantly fine-grained soils has received considerable attention following ground and foundation failures at sites underlain by silt-rich soils during recent earthquakes. In several cases substantial ground deformation and reduced bearing capacity of silt soils has been attributed to excess pore pressure generation during cyclic loading. These...
Posting advisory speed signs at sharp horizontal curve sites is a practice well established in the United States. The purpose of these signs is to provide the driving public with a safe speed to negotiate such curves; however, the link between these signs and safety has not yet been clearly...
A theoretical argument is presented to suggest that engineering curriculum be
designed to develop social capital. Additionally, the value of social capital in the
retention of students in the College of Engineering, and the development, role, and value
of social capital in an electrical engineering laboratory is evaluated. Data collected...
The Asphalt Pavement Analyzer (APA) device was used to characterize the impact of various mix factors on the development of permanent deformation in dense-graded mixes given a standard compactive effort. Factors included two aggregate sizes, three VMA levels, two fines contents, three binder contents and four binder types. All specimens...
Complex oscillations including chaotic motions have been identified in off-shore and submerged mooring systems characterized by nonlinear fluid-structure interactions and restoring forces. In this paper, a means of controlling these nonlinear oscillations is addressed. When applied, the controller is able to drive the system to periodic oscillations of arbitrary periodicity....