Increasing load magnitudes and loss of reinforcing steel cross-sectional area from corrosion creates the potential for low-cycle fatigue (LCF) in conventionally reinforced concrete (CRC) bridge girders lightly reinforced for shear. LCF of reinforcing steel may be of particular concern. Little data are available for LCF of reinforcing steel without stress...
Large numbers of 1950's vintage conventionally reinforced concrete (CRC) bridges remain in-service in the national bridge inventory. Many of these bridges are lightly reinforced for shear. Evaluation of these bridges to prevent unnecessary and costly repairs requires refined analytical techniques. This dissertation presents finite element (FE) modeling and comparisons of...
Carbon fiber reinforced polymer (CFRP) materials are emerging as an effective means of strengthening and rehabilitating bridges. Near surface mounting (NSM) is a newer technique for application of CFRP for retrofitting of bridge members that provides advantages over conventional strengthening techniques. The technique is still new and uncertainties remain regarding...
As oriented strand board (OSB) increases in use as an engineered wood product, improving the in-plane shear properties will allow more efficient use of the material as well as open up other opportunities for OSB to be used in engineered wood products with high shear stresses. Based on classical laminated...
Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Assessment of an existing bridge is needed when the structure exhibits signs of distress. Assessment practices require refinement in the calculation of loading and resistance while maintaining an acceptable level of risk, to minimize costs associated with repair, replacement and weight restrictions. Previous risk-based assessments evaluated the strength cases for...
Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened
with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
Many conventionally reinforced concrete deck girder bridges (RCDG) and their intermediate supporting bent caps were designed during the Eisenhower interstate era of the 1950’s with the AASHO design equations at the time, which subsequently place higher demand on the concrete. The referenced components may exhibit diagonal cracking due to the...
Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...