Several potential sorbent materials containing iron oxides were prepared and evaluated for potential to remove divalent metals from waste waters. These included a ferrihydrite-coated sand, maghemite incorporated in Dowex[Trademark] ion exchange resin, gothite and two thermally activated ferrihydrites. Attempts to prepare sorbents from steel shot by coating with ferrihydrite or...
This study focuses specifically on the investigation of a new, inexpensive geophone system and its application to monitor wave activity. Studies of seismic observations of coastal cliffs suggest that ground motions generated from local ocean waves may provide a surrogate to limited wave buoy data to quantify the wave contact...
As e-commerce and urban deliveries spike, there is an increasing demand for curbside loading/unloading space. However, commercial vehicle drivers face numerous challenges while navigating dense urban road networks. Previous literature on the topic of how commercial vehicle drivers make choices about when and where to park is scarce, and data...
Prediction equations were developed for estimating the flow
regime at ungaged stream locations in the Oregon coastal range.
Principal components analysis was used to screen the initial data set
of physiographic and meteorological parameters. The final regression
equations for predicting mean monthly flow had standard errors of
estimate ranging from...
Low temperature cracking is attributed to tensile stresses induced in an
asphalt concrete pavement that develop when the pavement is subjected to a cold
temperature. Cracking results in poor ride quality and a reduction in service life of
the pavement. Low temperature cracking has been predicted by regression
equations, mechanistic...
Originally used as a method to densify loose soils, controlled blasting has expanded its applicability to geotechnical engineering by becoming a research tool to physically generate liquefaction for full-scale in-situ tests, ranging from seismic performance of deep foundations to evaluating ground improvement techniques. Current methods used to design the blasting...
Land application of industrial wastewater with high levels of nitrogen requires
adequate management practices to prevent groundwater pollution by nitrates. In this study
a predictive computerized model was developed for nitrate leachate concentrations
resulting from land application of wastewater onto crop systems including poplars. The
study included a literature review,...
The objective of this study was to develop and validate practical modeling
methods for investigating load paths and system behavior in a realistic, light-frame wood
structure. The modeling methods were validated against full-scale tests on subassemblies
and an L-shaped house. The model of the L-shaped house was then modified
and...
Steel Slit Panel Frames (SSPFs) are an innovative and resilient lateral force resisting system. Steel Slit Panels (SSPs) are bolted to the beams and act as replaceable seismic fuses, dissipating energy through flexural yielding in links between vertical rows of slits. SSPFs have shown promise as a lateral force resisting...
This study presents a methodology for power take off (PTO) forecasting for an array of heave wave energy converters (WECs). Based on spectral data obtained directly from the National Data Buoy Center, representative realistic sea states are generated at the location of the WECs, and by using two wave-structure interaction...
Wildland-urban interface (WUI) communities, where forested land boundaries or intermixes with infrastructure, are quickly growing in the US. WUI communities have grown substantially from 1990 to 2010, with an increase of 12.7 million houses and 25 million people. Wildfires encroaching on WUI communities can cause damage to both above ground...
Traditional braced frames are an efficient and economic means of resisting seismic demands. However, braced frames are prone to story mechanisms, which can result in concentrations of demands and damage during seismic events. Including steel strongbacks in conjunction with traditional braced frames can mitigate story mechanisms. The SBF results in...
Tsunami loading can cause sediment instability, which can compromise the structural integrity of coastal buildings and infrastructure. To understand the process by which a tsunami can cause sediment instability, it is necessary to understand how the pore water pressure in the soil changes during tsunami loading. Tsunami run-up causes the...
The overriding goal of this study was to provide first order estimates of dilution and tidal flushing of waste discharges released hypothetically into various Oregon estuaries during critical low flows and tides. Causal relationships between discharged wastes and subsequent estuarine response were studied. Various approaches to determine the assimilative capacity...
A study was conducted to determine the quantity and character
of substances leached from logs floating in water, and the rate of
leaching of these substances. The species of wood studied were Douglas
fir and ponderosa pine. The research was carried out in a controlled
laboratory environment with log sections...
The analysis of a member carrying a combination of lateral and axial
loads (a "beam-column") is a problem of frequent occurrence in aircraft
structural design. This thesis presents the derivation and application
of the Polar method, both analytical and graphical. The method was first
suggested in Germany, several years later...
At the present time only a portion of Corvallis is sewered and a portion of the city still employs the most crude and unhealthful methods of disposal. The district east of Ninth Street, as shown on the map, has an effective system of well constructed sewers, of the combined storm-water...
In response to the growing environmental concern and higher operating cost of regular automobile, the concept of Low-Speed Vehicles (LSVs) is becoming popular as a sustainable mode of transportation. Primarily designed for protected environments and gated communities, the use of these vehicles is gradually increasing on public roadways as a...
This paper presents an application of the wave equation to the
problem of selecting a driving hammer for prestressed concrete piles.
The potentially damaging effects of these types of hammers on various
prestressed concrete piles were analyzed by means of parametric
studies carried out on a hypothetical group of problems...
The structural behavior of pile groups (dolphins) is analyzed
considering two types of boundary conditions. First the individual
piles of the group are assumed to be rigidly embedded in the soil. In
the second analysis the more realistic case is considered where the
soil foundation is allowed to yield. The...
A physical model study was performed to examine the forces and response of 1:6 scale wood-frame coastal residential structures subjected to storm surge and waves. An on-grade and an elevated specimen were tested and exposed to regular waves with varying water depths and wave heights to simulate Hurricane Sandy’s conditions....
Large quantities of unused heavy oil and residual waste products from the petroleum refining industry were deposited in on-site landfills, pits, and lagoons, prior to the promulgation of regulations governing their disposal and technology development that would further utilize and/or recycle these materials.
Contacting petroleum products with sulfuric acid for...
The Asphalt Pavement Analyzer (APA) device was used to characterize the impact of various mix factors on the development of permanent deformation in dense-graded mixes given a standard compactive effort. Factors included two aggregate sizes, three VMA levels, two fines contents, three binder contents and four binder types. All specimens...
Performance-based design has gained interest in recent years among structural designers and researchers. Performance-based design includes selection of appropriate building sites, structural systems and configurations, as well as analytical procedures used in the design process, to confirm that the structure has adequate strength, stiffness and energy dissipation capacity to respond...
To facilitate the design of Natural and Nature-Based Features (NNBF) for flood protection, this thesis expands an existing engineering design methodology to NNBF systems. The existing approach is a Level III reliability method for the performance-based design of traditional coastal engineering systems. The expanded methodology incorporates uncertainties inherent to both...
The overall goal of this study was to evaluate an alternative to
traditional wood framed shear wall construction. This study introduced the
innovative idea of using a water and seismic damage resistant, wood-concrete-
composite (WCC) construction instead of an all-wood design. The
WCC design consisted of a thin shell of...
The objectives of this study were to evaluate the performance of wood frame shear walls
under monotonic, cyclic and earthquake loads by: (1) estimating the variability of shear wall
performance, (2) comparing the performance of walls under each loading protocol, (3) evaluating
the effects of anchorage on wall performance, and...
The use of high strength steel reinforcement has the potential to provide economic and constructability benefits when used in reinforced concrete structures. However, more research is needed to justify and confidently allow its use. Current design provisions limit the nominal yield strength of reinforcing steel bars to 60 ksi (420...
This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
Highway work zones are extremely dangerous environments due to the presence of workers near high-speed traveling vehicles. This dynamic environment results in a disproportionate number of accidents that cause injury and casualty to both drivers and workers due primarily to vehicular intrusions into work zones. Several emerging work zone intrusion...
This paper presents a method of predicting penetration
resistance for driven piles, using known driving records for driving
the same type piling in similar subsurface conditions. As known
driving records are not always available to the analyst, a method was
also investigated using soil data only. The analytical tools employed...
At signalized intersections, pedestrians are considered to be amongst the most vulnerable. When in the crosswalk at intersections without protected left-turn phasing, pedestrians are particularly at risk from left-turning vehicles. Until recently, a wide variety of indications were in use across the US to indicate a permissive left-turn condition to...
Pedestrian distraction at roadway crossings has been correlated with a higher risk of pedestrian-vehicle collisions due to the pedestrian's cognitive, visual, and motor attention being drawn to a wide variety of secondary tasks.
This study is different from previous field studies of pedestrian midblock crossings in that the geometric layout...
With the growing trend in use of 3D laser scanning technology for data collection, it is important to study the various potential applications of this revolutionary technology. One such application is the measurement of road roughness at both large and small scales. At larger extents, terrestrial laser scanning (TLS) is...
Probability-based reliability methods have placed an increased emphasis on realistic simulation of structural behavior in bridge engineering. Uncertainty is present in every aspect of structural analysis. Aleatory uncertainties in the loading and load-carrying capacities, and epistemic uncertainties in mathematical idealization of bridge systems are the major contributors to uncertain structural...
A study to determine the oxygen transfer rates in selected
waste liquids and to compare these rates with that of distilled water
was performed. Tests using treated sewage and pulp and paper mill
effluent were conducted in a model aeration tank. From the data, a,
a ratio of the rate...
Former industrial or commercial sites that have been left unused are typically referred to as brownfield sites, or simply, brownfields. Many communities have such properties that are abandoned, idle or underused. Despite public efforts to facilitate brownfields revitalization projects, the rate of remediation remains unexpectedly slow. Efforts to resolve this...
Effluent from an anaerobic swine manure lagoon was applied at
the upper end of six, 100 feet (30.5 m) long by 3 feet (0.9m) wide,
grass-covered plots which sloped about 3 percent. The objectives were
to measure concentration attenuation and mass reduction of potential
pollutants in the wastewater as the...
Terrestrial Laser Scanning (TLS) is an efficient, effective, and precise measurement tool rapidly growing in popularity in a wide variety of fields. Use of TLS data often requires aligning multiple scans for a more complete model of a scene or object, a procedure known as scan registration. Each scan setup...
A study of phosphorus loading and water quality implications was conducted for
the Oregon coastal lakes. The study was based on existing data for lake total phosphorus
concentrations and for watershed land uses. A phosphorus mass-balance model was
developed to predict lake total phosphorus concentrations from estimated phosphorus
loading from...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
Cross Laminated Timber (CLT) technology has been growing in the EU and Canada
since the early 1990's and utilizes the mechanical properties of structural grade
lumber to create a strong panel product for use in floor, ceiling and wall systems. The
hypothesis of this project was that CLT panels made...
A growth model is developed for coho salmon which accounts for
temperatures and feeding rates typically encountered in fish hatchery
operation. Feeding rates utilized by the model ranged from
maintenance to maximum utilizable rations. The model is derived from
an empirical equation for maximum growth rate, and a theoretical
equation...
Unlike other industries, overall efficiency of construction projects has been growing minimally which directly causes cost overruns of projects. Though reducing idle time and increasing operational efficiency of construction equipment could result in significant cost saving, there is lack of practical knowledge of adjusting operational efficiency and integrating cost and...
An optimization methodology, algorithms, and computer program for
cable/lumped-body deployment system are developed for the design and installation of
sonar packages in deep ocean ranges. In addition, a methodology and algorithms for the
control of the system are proposed.
A penalty function is developed in terms of the system parameters...
Operating speed is one of the best performance measures that can tell transportation agencies how well or how poorly the transportation system is functioning. Fluctuating operating speeds often mean there is a design flaw or something about the physical road design that violates drivers' expectations. A primary example of this...
The present highway funding system, especially fuel taxes, may become less reliable revenue sources in the future, while the transportation public agencies do not have the sufficient financial resources needed to meet the increasing traffic demand. Regarding the socio-economic impact of road privatization, a wide range of approaches and models...
The transportation of logs from the forest to the mill accounts for 25-50% of the delivered cost of wood, depending mostly on haul distance. Decision support systems (DSS) for log truck scheduling and dispatching have the potential to reduce transportation costs by optimally constructing routes, also known as schedules for...
Numerical results are presented using a higher-order pseudo-spectral method in order to solve the Zakharov-Craig-Sulem formulation of the Euler model. We study the effects of variable bathymetry on weakly-dispersive, weakly-nonlinear, shallow water waves. Improved predictions on wave amplitude and shoaling behavior are developed by analytical means in the context of...
A typhoon is a highly destructive weather event, causing severe damage and losses to the economy and lives. The impacts of typhoons can be mitigated by adequately predicting their path in advance. The progress of a typhoon can be investigated by analyzing the significant changes in Precipitable Water Vapor (PWV)...
Radiation stresses, defined as the excess flow of momentum due to the presence of waves (Longuet-Higgins, 1964), are the main drivers behind the cross-shore and longshore forcing that results in wave setup, set-down, and longshore currents (e.g. Svendsen, 2006). Longshore currents entrain and transport sediment and therefore play an important...
Rip currents pose a serious danger to visitors of bathing beaches; they are also an important process in surf zone circulation. Haller et al. [2014] demonstrated that shore-based X-band radar can be used to compliment in situ measurements of rip currents. However, little is known of the underlying radar imaging...
This research analyzes the effects of islands on river process and the effects river processes have on island formation. A fluvial island is defined herein as a land mass within a river channel that is separated from the floodplain by water on all sides, exhibits some stability, and remains exposed...
Modern geospatial data are frequently represented in some type of three-dimensional (3D) coordinate system, for example geodetic latitude, longitude, and ellipsoid height (φ, λ, h) derived from Global Navigation Satellite Systems (GNSS). But for engineering and surveying work, φ, λ, h coordinates are usually converted to a topocentric system consisting...
Geotextiles are synthetic fabrics which may be substituted for
graded aggregate to protect ocean and coastal structures from erosion
and soil instability adjacent to the structure. They are commonly
used as a filter and as a structural membrane between an undisturbed
sediment surface below and an erosion resistant coarse aggregate...
Caissons on permeable seabeds have been designed and constructed
for a variety of needs in coastal and offshore engineering. An evaluation of the adequacy of the foundation beneath the structure is
required for an economic and safe design. To address this requirement, a two-dimensional analytical model of the foundation response...
A new set of data from a large-scale sand bar migration experiment is presented. During this experiment, two sandbars were generated. One of the bar was generated by the action of undertow, and sediment moved offshore. The other bar was generated by the shoreward movement of sediment coming from the...
In this dissertation the interactions between hydrodynamics, sediment suspension and transport, and morphological evolution in the surf zone was investigated with a large-scale laboratory experiment data, CROss-Shore Sediment Transport Experiment (CROSSTEX). The data set included comprehensive measurements of water surface elevation, fluid velocity, sediment concentration, and morphology for irregular waves...
Wind flow on vegetated coastal foredunes adapts to the local canopy drag, resulting in spatial gradients in bed shear stresses which contribute to the formation of localized bedforms (e.g., nebkha, shadow dunes). Numerous morphological properties of the plants, including canopy height and density, affect the wind flow dynamics and therefore...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
Major emphasis of this research study involved the evaluation
of nutrient transport by overland flow. Samples gathered at various
distances relative to a swine-waste spray irrigation system were
used for the nutrient evaluation.
As a result of this study, the following conclusions are made:
1. It is improbable that the...
Fluid-structure interaction (FSI) has been of significant research interest worldwide over the past several decades because of its variety of applications in both offshore and coastal engineering. Researchers analyzing FSI systems rely heavily on experimental tests in model scale in laboratories or large-scale sea trials. However, these tests are often...
Anchoring systems are used to hold floating offshore devices (e.g., energy devices, oil platforms) to keep them on their stations. Anchors are embedded into the seabed soils. In some cases, the interface shear between anchor and seabed soils together with anchor self-weight provide the holding capacity of the anchoring systems....
This dissertation studies the coupled fluid-structure interaction (FSI) of a wave energy converter (WEC) and evaluates the design of a WEC mooring system. The research is conducted in support of conceptual development, field test and performance evaluation of WECs as part of the mission of the Northwest National Marine Renewable...
A numerical model, simulating the complex behavior of reinforced soil walls using the finite element method, was developed to evaluate the behavior of a surcharged, geosynthetic-reinforced retaining wall with modular block facing. A nonlinear elastic-plastic constitutive soil material model was calibrated to experimental plane strain test data, while the performance...
Halogenated organic compounds have had widespread and massive applications in industry, agriculture, and private households, for example, as degreasing solvents, flame retardants and in polymer production. They are released to the environment through both anthropogenic and natural sources. The most common chlorinated solvents present as contaminants include tetrachloroethene (PCE, perchloroethene)...
A challenge for municipal authorities of growing urban areas is to provide larger and faster transportation and utility networks that are safe and resilient to significant disruptions after an earthquake event and other disasters. Urban regions, like the San Francisco Bay or the Los Angeles area, are situated in seismically...
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
A numerical model for the simulation of fully-coupled fluid-structure
interaction is developed in this study. In modeling the fluid, the Reynolds
Averaged Navier-Stokes equations are solved for an incompressible viscous
fluid field and a k-ε model is employed for turbulence computations.
Hydrodynamic forces obtained by the integration of the fluid...
A computer program was developed for estimating construction
pore pressures in embankments without drainage at any location in
the embankment at any time during construction. This program incorporated
a modification of the Hilf-Brantz method of pore pressure
calculation and a finite element method of stress computation.
Previous methods of calculating...
A sewer geyser is a series of ejecting air-water mixture eruptions through vertical shafts of drainage systems. In field observed geyser incidents, manhole covers were blown into the air and they were followed by ejecting air-water mixture eruptions that lasted for several seconds at a time. Trapped air in sewer...
Compacted aggregate trenches are a method of soil improvement that could be substituted for commonly used aggregate piers in certain geometrical arrangements of shallow foundations. However, this type of ground improvement has little research to support the understanding of their contribution to improved strength of an unimproved clay soil. This...
The characterization of the seismic performance of structures relies on numerical simulations. However, estimates of seismic response are subject to various sources of uncertainty, including modeling uncertainty. This research estimated the response of two full-scale structural specimens composed of a moment resisting frame, elastic spines, and force-limiting connections (FLC), which...
The Steel Plate Shear Wall (SPSW) system, is an innovative seismic lateral force resistant system, which has experienced increased use over the last three decades. The SPSW system is composed of boundary elements which anchor web plates that develop diagonal tension fields. A number of SPSW buildings have been built...
A numerical model is developed to estimate wave forces on A-Jacks armor units. The forces include drag, inertia, buoyancy, and slamming as the unit penetrates the free surface. The wave force model is used to determine the rigid body motions of the units. Bulk forces on a matrix of units...
Steel moment-resisting frames (MRFs) are widely used in the United States to resist seismic forces. MRFs have many advantages, including architectural versatility, vetted member and connection detailing requirements, and high ductility for special MRFs (SMRF). However, MRFs require large members to meet story drift criteria. Moreover, strong-column-weak-beam requirements can result...
Normal acceleration characteristics of passenger cars provide valuable information for various aspects of transportation engineering, including use in the geometric designs of intersections, freeway ramps, passing lanes, acceleration lanes, turning bays, or in the development of traffic
simulation or fuel consumption models.
However, the data used in previous studies are...
Complex nonlinear and chaotic responses have been recently observed in various
compliant ocean systems. These systems are characterized by a nonlinear mooring
restoring force and a coupled fluid-structure interaction exciting force. A general class
of ocean mooring system models is formulated by incorporating a variable mooring
configuration and the exact...
Nailed connections have nonlinear load-displacement
relations. Modeling these connections in an assembled
structure would require a great amount of computational time
because of the large number of degrees of freedom.
Replacing these connections with energetically-equivalent
nonlinear springs reduces the number of degrees of freedom,
and leads to computational efficiency in...
The Horsetail Creek (HC) bridge is an example of an Oregon bridge that was classified as structurally deficient and was not designed to withstand earthquake (EQ) excitations. A fiber-reinforced polymer (FRP) rehabilitation was performed on the HC bridge to increase flexural and shear capacities for traffic loads. However, a seismic...
A finite element formulation is developed for the prediction of
the large displacement response of pipelines which are placed upon
irregularly contoured marine sediments and are subsequently subjected
to episodic hydrodynamic loads. The equations of motion during each
episode of extreme wave activity are obtained from a variational form
of...
Engineering analysis of heavy timber structures under dynamic loads
is generally lacking. Some literature suggests that heavy timber structures
are stiffer than expected, but popular engineering opinion is to the contrary.
In addition, prior research has shown that passive friction dampers can be
used in timber structures for the intended...
The nonlinear dynamic analysis of cable and membrane structures
is presented in this study. Attention is given to the nonlinearities
arising from large displacements, from nonlinear stress-strain
relationships and from nonconservative loadings.
The finite element method is used to model the cables and
membranes. Curvilinear geometries of the elements are...
A second-order nonlinear diffraction theory is developed for a
large diameter circular cylinder under the action of surface gravity
waves of finite amplitude in water of-finite depth. Boundary value
problems are derived by using a perturbation expansion and the
solutions for the diffracted waves are given in terms of Fredholm...
Failure of a gusset plate that caused the I-35W Bridge collapse in Minneapolis, MN resulted in mandated rating of connections by the Federal Highway Administration (FHWA). Rating connections requires material properties as an input. The material properties are generally reported on the available detailed drawings for bridges. However, some bridges...
Groundwater contamination on irrigated land is of concern in this nation
and around the world. In order to reduce the potential of groundwater
contamination by agricultural practices such as irrigation, fertilizer and pesticide
application, vadose-zone monitoring and sampling are needed. The main
objective of this study was to evaluate impacts...
Coastal landslides and erosion are major natural hazards resulting in unstable slopes, constituting immense challenges to modern infrastructure. Developing, maintaining, and performing risk assessments of infrastructure on, or close to, these hazards require a detailed understanding of the geophysical processes destabilizing the slope. These efforts start with the collection of...
Imagery acquired from unmanned aircraft systems (UAS) and processed with structure from motion (SfM) – multi-view stereo (MVS) algorithms provides transformative new capabilities for surveying and mapping. Together, these new tools are leading to a democratization of airborne surveying and mapping by enabling similar capabilities (including similar or better accuracies,...
Pin and hanger assemblies are a common type of connection used in past engineering practice for steel girder bridges. The connection consists of pins, hanger plates, and girder ends. The connection detail was used widely between 1930 and 1980. The connections are considered fracture critical and nonredundant because connection failure...