Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
Light-frame construction practices and materials have changed greatly
over the past 100 years. Contemporary research has focused on modern construction; thus, we know a great deal about the behavior of modern lightframe buildings under lateral forces. However, there are many light-frame buildings that were built prior to the introduction of...
Hyporheic Exchange Flow (HEF) is driven by head gradients defined by the hydro-topography of the stream surface, which is controlled by the particular geomorphology of the stream. We quantified the impact of large wood, which typically exerts a strong control on stream morphology, on HEF in a second order, low...
The main objective of this research study is to incorporate construction worker safety and health into sustainable design and construction practices. This can be fulfilled by the development of an innovative construction worker safety and health planning tool, called Sustainable Construction Safety and Health (SCSH) Rating System that will:
•...
The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
Metal and hydrogen ion acidity and extreme nitrate concentrations typical of
Department of Energy (DOE) legacy waste sites pose formidable challenges to
successful implementation of in situ bio-immobilization. Intermediate-scale (~ 2.5 m),
flow through models of an in situ bio-barrier were constructed to investigate U and Tc
removal from groundwater...
Capacity of transverse 1950's vintage reinforced concrete deck girder bridge bent caps with large straight bar anchorages were investigated and evaluated. Eleven subassemblage column specimens were examined with different anchorage lengths, bar groupings, amount of transverse steel, and externally applied axial force. Test results showed an increase in anchorage capacity...
It is commonly accepted that for the analysis of wood beams, the neutral axis coincides with the centroid of the beam. Although this assumption is used in analysis, wood is not an isotropic material, as it has different elastic properties in the tangential, radial and longitudinal directions, nor is it...
Dissociation between catabolism and anabolism, generically termed “metabolic uncoupling”, has been studied for aerobic cultures of Shewanella oneidensis MR-1. Under conditions promoting metabolic uncoupling, the cell yield diminishes while the substrate utilization rate remains largely unchanged. The effects of excess substrate conditions and TCS addition on the metabolism of pyruvate...
Normal acceleration characteristics of passenger cars provide valuable information for various aspects of transportation engineering, including use in the geometric designs of intersections, freeway ramps, passing lanes, acceleration lanes, turning bays, or in the development of traffic
simulation or fuel consumption models.
However, the data used in previous studies are...
Article 1: Behavior of Epoxy Injected Diagonally Cracked Full-Scale CRC Deck-Girders.
Many cast-in place reinforced concrete deck-girder bridges (RCDG) remain in the national inventory and exhibit diagonal cracking. Epoxy injection has been in use for several decades as a method for sealing diagonal cracks, but the effects on girder behavior...
A generalized, three-dimensional, finite element bridge model was created in order to efficiently and accurately assess live-load girder distribution factors for a variety of bridge types. This model shortens the time required by bridge analysts to develop individual finite element models for bridges of varying geometries. The creation of the...
It is becoming increasingly important to understand fundamental hillslope-scale hydrological processes. Most hillslope-sale transport experiments have generally focused on conceptual findings or other aspect of flow behavior, rather than the quantification of the mass transport mechanisms of advection and dispersion. When the velocities have been quantified, dispersion has been mentioned...
This research examines the downstream fining phenomenon as it operates in coastal gravel-bed rivers of Oregon. Downstream fining is a change in bed composition toward smaller sediment sizes in the downstream direction. Changes in stream flow discharge and channel slope affect the rate of bed-load transport, thereby altering the downstream...
In recent years confinement requirements for concrete columns have increased in seismic regions. Steel jackets are one way to confine reinforced concrete columns. The increased confinement provides additional strength and ductility for the columns during seismic events. For reinforced concrete columns with steel jackets, there are different section properties in...
In the United States there are currently two different options for providing safety audits to roadway projects. Traditional audits can be conducted using procedures similar to those in the United Kingdom, or those similar to Australia and New Zealand (Austroads). Another option for conducting safety audits is to use the...
Because of the increased need for sustainable construction in an ever urbanizing culture, new sustainable drainage systems are being developed and implemented. Bioswales are becoming
an increasingly popular form of sustainable urban drainage used for parking lots and
subdivisions. But little is known regarding the effectiveness of bioswales in really...
Forest roads produce fine sediment with traffic during wet weather. If the forest road is connected to a stream it can be a source of turbidity and fine sediment that may be detrimental to aquatic organisms especially salmonids.
The goal of this work was to investigate turbid runoff during wet-weather...
The present highway funding system, especially fuel taxes, may become less reliable revenue sources in the future, while the transportation public agencies do not have the sufficient financial resources needed to meet the increasing traffic demand. Regarding the socio-economic impact of road privatization, a wide range of approaches and models...
Because of the increased need for sustainable construction in an ever urbanizing culture, new
sustainable drainage systems are being developed and implemented. Bioswales are becoming
an increasingly popular form of sustainable urban drainage used for parking lots and
subdivisions. But little is known regarding the effectiveness of bioswales in really...
More than 65,000 organic chemicals are currently in commercial production with
approximately 1000 added each year. Many chemicals are released into the environment as organic mixtures derived from complex hazardous or solid wastes. Of these, more than 1000 chemicals are of environmental concern because of their production quantities, toxicity, persistence,...
Crash rates are said to be nearly three times higher on curved sections than those on straight sections of rural roadways. As a result, advisory curve/speed signs are standard practice to mitigate these risks on sharp horizontal curves. The industry standard for determining appropriate and uniform speeds for such signs...
This thesis evaluates pre-construction auditing procedures used in the United Kingdom, Australia, and New Zealand in order to help create post-construction auditing procedures for the state of Oregon. It was funded as part of the development of the Oregon Department of Transportation (ODOT) Safety Investigation Manual, and also evaluates content...
Despite recent efforts to improve site safety, construction still accounts for a disproportionate injury and illness rate. According to the 2007 injury and illness data released by the National Safety Council, the construction industry has a fatality and disabling injury rate that is approximately three times higher than the all-industry...
The educational environment is filled with different types of students, all with diverse learning styles. The Meyers-Briggs Type Indicator and Kolb’s Theory of Experiential Learning are generally accepted methods for determining and assessing a person’s preferred method of information processing. There has been research that suggests learning styles are specific...
While damages due to ponding are common and expensive, provisions for design and
construction of flat roof systems lack guidance regarding these loads. The goal of this research is
to present methods of designing or building flat roofs that are less vulnerable to this condition. An
investigation of the literature,...
Current ACI design provisions for shear in reinforced concrete (RC) beams strengthened
with externally bonded carbon fiber-reinforced polymer (CFRP) U-wraps may not adequately account for the effect of scale. This paper describes tests of 6 geometrically scaled beams to identify possible scale effects of such beams. Results indicated that effective...
As part of a roof framing system, light-frame wood trusses often require lateral bracing to reduce the effective length for flexural buckling of compression web members. This observational research investigates the design requirements for discrete compression web bracing intended to provide such lateral support. Four simple brace analysis methods based...
River regulation imposes changes in the supply of sediment and the frequency of competent flows. As a result, impounded rivers often exhibit downstream changes in channel processes, particle size, and morphology. The magnitude of change in competent flow frequency and sediment load together can be used to predict the pattern...
The overall goal of this study was to evaluate an alternative to
traditional wood framed shear wall construction. This study introduced the
innovative idea of using a water and seismic damage resistant, wood-concrete-
composite (WCC) construction instead of an all-wood design. The
WCC design consisted of a thin shell of...
Many conventionally reinforced concrete deck girder (RCDG) bridges were built in the US during the 1950s, throughout the expansion of the Interstate System. Designs followed the AASHO standard of the time, which permitted higher shear stress in concrete and reduced detailing requirements than permitted by current specifications. Many of these...
Long-term durability of surface-bonded carbon fiber-reinforced polymer (CFRP) U-wraps for shear strengthening of reinforced concrete (RC) bridge members remains uncertain due to the limited field experience with these materials. This paper provides experimental results from the testing of full-scale RC bridge girder specimens after exposure to prolonged freeze-thaw cycling. CFRP...
Turkey is an agricultural country where exchange and shipping of goods has been gravely hampered in the past by lack of highways. The railroads have large expanses of land between them, and highway construction in the past has been limited to strategic roads and connections of cities to railways. Unless...
As the traffic demand increases at a faster rate than the upgrade and maintenance of
transportation facilities through the traditional public financing methods in the United
States, the Public-Private Partnership (PPP) is becoming an important supplement to
the public transportation infrastructure investment. There are already several existing
PPP toll road...
Structural design codes have evolved continuously since modern codes were established. The allowable stress design format has been widely used since the late 191h century. During the past two decades, probability-based limit states design concepts have evolved and are increasingly being used for various material and structural types. Limit state...
Sediment transport in a gravel-bottomed stream located in the Oregon Coast Range was studied to determine the effects of a single
layer of large particles (the armour layer) located at the surface of the bed material. The bed load transport system was studied jointly with suspended sediment transport to understand...
Two hilislope sites in the central Oregon Coast Range were instrumented and monitored for winter precipitation and saturated and unsaturated subsurface conditions. The study sites were near-ridge depressions typically known as headwalls. Based on results of the monitoring, two existing mathematical models
were adapted to predict piezometric levels in headwalls...
Chromium and its compounds are widely used by modern industries, resulting in large quantities of this element being discharged into the environment. To remove chromium from contaminated soils and ground water, it is necessary to predict chemical and physical processes that control the rate of reactions and transport of chromium...
As part of a long term study to evaluate the dynamic properties of naturally frozen soils, resonant frequency and cyclic triaxial
tests were conducted on Fairbanks silt samples from the U.S. Army Cold Regions Research and Engineering Laboratory Permafrost Tunnel, Fox, Alaska. The test methods subject right cylindrical test
specimens...
The goal of this study was to develop an understanding of the nature of surge wave loading on
wood framed residential structures for a variety of building configurations and test conditions.
The objectives of the study were: (1) to measure forces on a 1/6th scale wood framed
residential structure, (2)...
This study presents a rational process with supporting data to establish
appropriate road design controls, criteria, and standards for low volume
recreation and resource development. Much of the information presented can
be used to supplement design data presented in a National road design policy
published by the American Association of...
This thesis explores the factors limiting the alkene substrate range of the vinyl chloride (VC)-utilizing bacteria, and describes a method for measuring VC transformation in situ. Vinyl fluoride (VF) was evaluated as a surrogate for monitoring aerobic VC-transformation utilizing three isolates, Mycobacterium EE13a, Mycobacterium JS60 and Nocardioides JS614. JS614 grew...
Studies were undertaken of the adsorption of chlorinated phenols from aqueous solution on granular activated carbon (Filtrasorb-400, 30x40 mesh). Single-component equilibrium adsorption data on the eight compounds in two concentration ranges at pH 7.0 fit the Langmuir equation better than the Freundlich equation. The adsorptive capacities at pH 7.0 increase...
The Lookout Creek Earthflow is located in the Cascade Mountain
Range in western Oregon. The Cascade Mountains are mainly volcanic
in origin, and deposits in and around the slide have a complex geomorphic
history,, affected by glacial, mass movement, and fluvial
processes. The currently moving land mass is about 1600...
The Steamboat Creek basin drains 227 mi² (588 km²) of steep forested terrain into the North Umpqua River of Southwest Oregon, 39
mi (63 km) northeast of Roseburg. Summer base flows for Steamboat Creek average 83 cfs (2.35 m³/sec). Steamboat Creek and its
tributaries are considered important to the production...
Initially, a small experimental study was undertaken to examine the influence of incline on the frequency of taut cables. The experiments consisted of exciting a short cable at angles of incline from zero to 90 degrees and at various tensions. The results from these experiments shows a small effect due...
Oregon's forestry industry has and will continue to be a vital component of Oregon's economy, with twenty-two percent of Oregon's 1986 gross state product and thirty-nine percent of Oregon's 1986 gross manufacturing product related the forestry goods. An integral component to proper management of Oregon's forestry lands is Sustaining the...
Wave breaking in the surf zone is an important forcing
mechanism on the generation of nearshore currents and in the driving
of sediment transport. At the same time, wave breaking can have
significant spatial and temporal variability that needs to be
accounted for in the description of nearshore processes. Remote...
This research focused on anaerobic transformation of trichloroethene (TCE), a
groundwater contaminant. The mixed anaerobic Evanite culture (EV) was studied to determine community behavior and composition responses to different electron donors and chloroethene electron acceptors. The potential toxicity from high concentrations of TCE and its daughter product cis-1,2-dichloroethene (cDCE) was...
The gasoline tax, the main source of highway revenue is no longer a viable source of
funding to maintain the existing highways. Many states in the United States are
already using revenues from other sources such as sales tax and income tax to fund
new highways. Oregon along with many...