Index Catalog // ScholarsArchive@OSU

Laboratory Observations of Tsunami-Driven Debris Damming with Comparison to ASCE 7-22 Minimum Design Loads

Creator:: Doyle, Kellen C.
Abstract:: Tsunami inundation of coastal communities can impose a wide array of forces on the built environment. Forces generated by tsunami-driven debris damming have the potential to cause failure of coastal structures and further accumulate flow-entrained debris. Since tsunami-resilient design standards were adopted by ASCE in 2016, debris damming considerations have...
Resource Type:: Masters Thesis
Full Text:: ASCE 7-22 Minimum Design Loads Abstract approved

Monotonic and Cyclic Testing of Cross-Laminated Timber Diaphragms

Creator:: Beairsto, Cody J.
Abstract:: Mass timber is emerging as a viable form of construction around the world in new markets for wood buildings. The entrance into these markets has driven the demand for more knowledge to enable designs alongside other structural materials such as steel and reinforced concrete. Large, in-plane tests on cross-laminated timber...
Resource Type:: Masters Thesis
Full Text:: factor (Rs) from ASCE 7-16, m-factors from ASCE 41-17, and validate common methodologies of mass timber

Probabilistic Multi-hazard Earthquake-Tsunami Structural Risk Assessment Framework

Creator:: Alam, Mohammad Shafiqual
Abstract:: Catastrophic earthquake and tsunami events that resulted in significant loss of life and property over the past two decades have raised the global awareness regarding the need to understand the response of communities and their built environment to multi-hazard extreme events. In recognition to this impending threat to the coastal...
Resource Type:: Dissertation
Full Text:: introduced for the first time in the current edition of ASCE/SEI 7 (ASCE 2016), “Minimum Design Loads and

Practical modeling for load paths in a realistic, light-frame wood house

Creator:: Pfretzschner, Kathryn S.
Abstract:: The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
Resource Type:: Masters Thesis
Full Text:: -entrant corner dimensions of the L-shaped house under ASCE 7-05 (ASCE 2005) design wind loads caused

Post-wildfire Investigation of Civil Infrastructure Following the 2018 Camp Fire

Creator:: Schulze, Stefanie S.
Abstract:: Wildland-urban interface (WUI) communities, where forested land boundaries or intermixes with infrastructure, are quickly growing in the US. WUI communities have grown substantially from 1990 to 2010, with an increase of 12.7 million houses and 25 million people. Wildfires encroaching on WUI communities can cause damage to both above ground...
Resource Type:: Masters Thesis

Coupled Eulerian-Lagrangian Finite Element Modeling Approach Applied to Wave Structure Interaction: Effects of Shielding, Channeling, and Wall Removal

Creator:: Al-Sayhood, Zeyad A.
Abstract:: The impact of tsunamis on coastal structures gained great a new impetus following the 2004 Indian Ocean Tsunami and the 2011 Tohoku earthquake and tsunami. While several experimental programs have been performed to gain a fundamental understanding, numerical models are needed to study additional features that cannot all be tested...
Resource Type:: Dissertation
Full Text:: building was designed explicitly to seismic and tsunami forces following ASCE 7-16 for a site

Comparison of screening, evaluation, rehabilitation and design provisions for wood-framed structures

Creator:: Baxter, Preston
Abstract:: Many publications, documents, codes and guidelines exist related to the seismic evaluation and rehabilitation design of existing buildings. This report discusses the assumptions and methods employed for investigation of two wood structures using four references: FEMA 154, FEMA 356, ASCEI per SEI 31, and 1997 UBC. The screening performed using...
Resource Type:: Masters Thesis

Effects of Moisture Intrusion on the Performance of a Cross-Laminated Timber (CLT) Angle Bracket Connection

Creator:: Bora, Shrenik S.
Abstract:: Cross-laminated timber (CLT) is revolutionizing the use of wood in the construction sector of North America as a solution for walls and diaphragms in mid-rise or even high-rise timber structures on account of its environmental advantages, high strength-to-weight ratio, fire-safety performance, and propensity for prefabrication. However, considering the hygroscopic nature...
Resource Type:: Masters Thesis
Full Text:: ..................................................................35 2.4.7 ASCE 41-17 Trilinear Model

Structural Design and Testing of Mass Timber Concrete Composite Floor Solutions with Acoustic Interlayers

Creator:: Srivastava, Mohit Raja
Abstract:: Timber-concrete composite (TCC) solutions originated in the early twentieth century. There has been a renewed interest in TCC solutions in modern mass timber buildings, especially for floor systems. However due to lack of data, design standards, and code acceptance, TCC solutions require that new mass timber solutions be tested, and...
Resource Type:: Masters Thesis
Full Text:: expected to be submitted to the ASCE Journal of Structural Engineering. The chapter focuses on evaluating

Evaluation of system effects and structural load paths in a wood-framed structure

Creator:: Martin, Kenneth G.
Abstract:: The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
Resource Type:: Masters Thesis
Full Text:: “Component and Cladding” pressures determined at a comparable wind speed, as given by ASCE 7-05 (lateral

ScholarsArchive@OSU

Laboratory Observations of Tsunami-Driven Debris Damming with Comparison to ASCE 7-22 Minimum Design Loads

Monotonic and Cyclic Testing of Cross-Laminated Timber Diaphragms

Probabilistic Multi-hazard Earthquake-Tsunami Structural Risk Assessment Framework

Practical modeling for load paths in a realistic, light-frame wood house

Post-wildfire Investigation of Civil Infrastructure Following the 2018 Camp Fire

Coupled Eulerian-Lagrangian Finite Element Modeling Approach Applied to Wave Structure Interaction: Effects of Shielding, Channeling, and Wall Removal

Comparison of screening, evaluation, rehabilitation and design provisions for wood-framed structures

Effects of Moisture Intrusion on the Performance of a Cross-Laminated Timber (CLT) Angle Bracket Connection

Structural Design and Testing of Mass Timber Concrete Composite Floor Solutions with Acoustic Interlayers

Evaluation of system effects and structural load paths in a wood-framed structure

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Funding Body

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search