The current state of research on gossip techniques for wireless broadcasting is very limited because past research efforts have mostly focused on using gossip techniques for multicast communication. On the other hand, those research efforts that have focused on using gossip techniques for wireless broadcast communications ignore energy efficiency and...
Recently, there has been peaked interest in developing high energy producing and optimized power take-off topologies for Wave Energy Converters (WEC). As large as the potential of the oceans may seem, harnessing that energy and effectively converting it to electricity in significant amounts is a challenge. Currently, there are no...
We demonstrated a low-cost and high-sensitivity DNA detection method using quantum dot-fullerene based molecular beacons (MBs) and magnetic nanoparticles. The MB tethered magnetic nanoparticles can be well dispersed in analytes for efficient DNA capture and concentrated by an external magnetic field for enhanced fluorescence signal detection. The detection requires only...
In bioacoustics, automatic animal voice detection and recognition from audio recordings is an emerging topic for animal preservation. Our research focuses on bird bioacoustics, where the goal is to segment bird syllables from the recording and predict the bird species for the syllables. Traditional methods for this task addresses the...
Deep learning has greatly improved visual recognition in recent years. However, recent research has shown that there exist many adversarial examples that can negatively impact the performance of such an architecture. Different from previous perspectives that focus on improving the classifiers to detect the adversarial examples, this work focuses on...
Massive MIMO is a promising technique for future 5G communications due to its high spectrum and energy efficiency. To realize its potential performance gain, accurate channel state information at transmitter side (CSIT) is essential. Frequency division duplex (FDD) is widely employed by the most cellular systems today. However, it requires...
In wireless communication, channel state information (CSI) is essential for data detection. Fast fading coefficients estimation is important in order to acquire accurate CSI. Kalman filters (KF) are widely used for real time parameter estimation and can be used to estimate the fast fading coefficients of a mobile communication channel....
Transparent conductive oxides (TCOs), primarily indium doped tin oxide, have been widely used in numerous fields since decades ago, such as solar cells, displays, OLEDs and ‘smart windows’ etc. Owing to the scarcity of indium, there is a great demand for new alternative materials. Metal/insulator/metal (MIM) diodes are a critical...
The National Conference of State Legislatures NCSL declares that 29 states have
been active in adopting and increasing renewable portfolio standards. Present
renewable portfolio standards require utilities to increase integration of renewable
energy sources such as photovoltaic (PV). The increased penetration of PV systems
is expected to destabilize the power...
This work presents the design and implementation of a low power phased-array receiver frontend at 28 GHz in 65 nm CMOS. The frontend incorporates a low- power low-noise amplifier(LNA) and a passive reflection-type phase shifter (RTPS) capable of providing 360° phase shift with 5-bit phase resolution and low loss variation....
Inkjet printing offers a cost effective, highly customizable method for rapid manufacturing of functional devices with minimal material waste. Although this method has been used for a variety of composites, little work has been done in the area of 3D printing magnetic composites. Presented here is a process for inkjet...
Modern variable speed machine drive (VSMD) systems are used for a variety of purposes including generation, propulsion, pumps and compressors. They employ high switching frequency power electronics to drive the electric machine. The machine is subject to large voltage overshoot if long power cables, are used, called Reflected Wave Phenomena...
Disaster response robots need to be simultaneously able to survive extreme environment and complete the mission efficiently and robustly. One of the determinants is the performance of the actuators in each joint, which drive the robot to the desired motion accurately. In robotics society, people usually build their robots directly...
As scaling of silicon (Si) based devices approaches fundamental limits, thin film metal-insulator-metal (MIM) tunnel diodes are attracting interest due to their potential for high speed operation. Because operation of these devices is based on tunneling, electrode / interfacial roughness is critical. Recently, it was shown that combining ultra-smooth bottom...
As the price of broadband access service becomes more affordable, the number of homes with WiFi and public WiFi hotspots in the US are projected to increase significantly in the next few years. However, limited capacity of existing WiFi networks fail to provide adequate bandwidth for densely populated areas. Therefore,...
Diabetes is a pandemic that affects nearly 29.1 million Americans and the fourth leading cause of mortality in the US. Type 1 diabetes is a chronic condition which occurs due to little to no production of insulin by the pancreas. This form of diabetes requires constant monitoring of blood glucose...
Threshold-based time of arrival (TOA) estimation is a technique for high-precision indoor localization. Existing threshold selection methods, such as xed thresh- old and normalized threshold methods, do not consider the signal-to-noise radio (SNR) value at the receiver. This is not desired for high-precision positioning. A proper threshold value depends on...
Optical wireless communication (OWC) is an alternative to radio frequency (RF)communication with a signi cantly larger and unregulated spectrum. In OWC systems, optical orthogonal frequency division multiplexing (O-OFDM) with intensity modulation and direct detection (IM/DD) is commonly used. There are two common signal structures in most OWC systems based on...
We demonstrated a sensitive biosensor based on plasmonic metal composite nanostructures. The device can be fabricated and duplicated with ease using a novel nanoprinting technology which allows precise transfer of metal nanostructures without complicated lithography processes. The design featured by its unique material composition and sub-wavelength structures maximizes the exposure...
This project is a custom output stage for a two-channel signal source design project at Oregon State. Starting in January, I began leading a team tasked with the development of an arbitrary waveform generator via the CreateIT Collaboratory at OSU. Undergraduate students interview into the CreateIT Collaboratory and are assigned...
The ability to accurately locate people and objects indoors will enable opportunities for control and automation of indoor environments. Current indoor localization solutions require dedicated hardware which must be custom tailored to each application. There are large technological, societal, and economic benefits in developing a more general purpose system that...
All-digital PLLs promise flexible and precise frequency modulation continous-wave(FMCW) radar signal signal for 77GHz radar applications. Such PLLs require digitally-controlled oscillators(DCO) with wide frequency tuning range and high resolution to address a range of applications and low phase noise requirements. In this thesis, novel resonator structures with ne capacitance/inductance switching...
A power inverter, or inverter, is an electronic device or circuitry that converts direct currents (DC) to alternating currents (AC) in the power electronics family. A three-phase inverter converts DC current to three-phase AC current. Inverters, especially three-phase inverters, have been widely used in many fields including renewable energy applications...
Due to the popularity of electronically controlled loads and the widespread use of alternative energy sources such as wind turbines and solar cells, the power quality at the distribution level must be carefully monitored. One of the many different means to monitor power quality is through frequency measurements. Nonlinearities cause...
In recent years there have been many improvements in the reliability of critical infrastructure systems. Despite these improvements and despite targeted efforts to improve the operation and control of the electric grid, the power systems industry has seen relatively small advances in this regard. For instance, today's power system is...
In the past two years, Oregon State University (OSU) Corvallis campus suffered several power outages. The estimated cost of one of those outages was close to a million dollars worth of equipment and impact on research projects. Meanwhile, the campus grid operates with severely aging power assets. The reliability of...
Synchrophasor technology has gained great momentum with the widely adopted concept of smart grids in power systems at transmission and generation level. This has led to an improved state estimation of a power system with the advent of Phasor Measurement Units (PMU). PMUs contribute in providing real-time information about the...
As screen resolution and video decoding capability have increased, high-definition (HD) video in resolutions as high as 1920 x 1080 is rapidly becoming the standard. Ad-hoc streaming of HD video over 802.11 wireless networks, e.g., streaming from a mobile device to a television, is convenient for users, but is hampered...
Substations are a crucial element at the transmission and distribution level of electric power systems. The primary substation equipment (power transformers and high voltage switching equipment) is used to transfer and transform electric energy by stepping up or down the voltage in transmission substations. Secondary equipment (such as IEDs, Intelligent...
Cognitive Radio Networks (CRNs) enable opportunistic access to the licensed channel resources by allowing unlicensed users to exploit vacant channel opportunities. One effective technique through which unlicensed users, often referred to as Secondary Users (SUs), acquire whether a channel is vacant is cooperative spectrum sensing. Despite its effectiveness in enabling...
The objective of the work presented herein is the development of the extended Kalman filter for nonlinear system modeling. A standard Kalman filter is a well-known filter for estimating the state of a system, assuming the system is linear and it has a Gaussian distribution in its noise. In reality,...
Permanent magnet synchronous machines (PMSMs) are widely used in electric vehicles and hybrid electric vehicles to propel the wheels. Various control strategies have been developed for PMSM drive systems to achieve both high efficiency and safe operation. In a PMSM drive system, generally the high voltage battery and the power...
The objective of the work reported herein is to explore the impact of decreasing channel thickness on radio-frequency (RF) sputtered amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) electrical performance through the evaluation of drain current versus gate voltage (I[subscript D] − V[subscript G]) transfer curves. For a fixed set of...
Increased penetration of renewable energy sources results in higher operating reserve requirements, due to the inherent variability and uncertainty of these resources. Many studies, primarily focusing on wind and solar, have determined that geographic diversity of variable renewables substantially reduces system variability and uncertainty. The Pacific Northwest is well suited...
Analog to digital converters (ADCs) are a critical part of communication between the physical world and the increasingly digital systems humans use every day. ADCs have inherent non-idealities that degrade performance. Nonlinearity is one of the most prevalent non-idealities that designers face. While calibration methods for nonlinearity exist in the...
The aim of the research undertaken for this thesis was to develop a new high-performance amorphous oxide semiconductor (AOS) for use as a channel layer in a thin-film transistor (TFT). AOS TFTs offer higher electron mobility than the established amorphous silicon based technology. A new channel material comprised of aluminum...
This work describes the development of an accurate, low-cost, expandable and wearable health and activity monitoring platform. Wearable monitors used to track physical activity are becoming an increasingly popular and effective way to combat our dangerously sedentary lifestyles. Unfortunately most existing wearable solutions are either costly, inaccurate or cumbersome. The...
New amplifier architectures are presented using non-traditional methods of biasing. Time-based dynamic biasing and signal-based dynamic biasing are discussed in the context of new architectures. This includes a new form of ring amplification with a dynamic deadzone, allowing for a structure whose coarse path does not consume static power.
Recent publications show that successive approximation register (SAR) analog to digital converters (ADC) are capable of achieving high efficiency over other ADC topologies. Furthermore, techniques have been adopted to process signals with low activity periods, such as biomedical and industrial sensors. Prior work used least- significant bit first quantization (LSBFQ)...
The primary focus of this thesis is modifying the comprehensive depletion-mode model and extending its applicability to p-channel thin-film transistor (TFT) behavior and subthreshold (subpinchoff) operation. The comprehensive depletion-mode model accurately describes depletion-mode TFT behavior and establishes a set of equations, different from those obtained from square-law theory, which can...
The focus of this thesis is developing materials for thin-film transistors (TFTs). Cu₃SbS₄ is explored as p-channel layer. Cu₃SbS₄ TFTs show p-type, depletion-mode behavior with a small amount of gate-controlled modulation of the channel conductance. This behavior is consistent with Hall measurements indicating a mobility of 17 cm²V⁻¹s⁻¹ and hole...
The primary objective of a grid is to maintain a balance between generation and load. If these quantities are not in balance with each other, severe damages such as voltage fluctuations, low power quality, power outages or even cascaded blackouts may occur. Hence one of the primary factors that holds...
Power generation has been an ever growing exigency since the invention of electric power. The world is gradually inching away from conventional generation toward renewable generation. Advancements in renewable energy generation have been at a steady positive pace over the past few decades with different resources developing to be feasible...
The research presented herein represents an effort to combine the ultra-smooth surface of an amorphous metal thin film (AMTF) with a solution-processed dielectric synthesized via prompt inorganic condensation (PIC). Analysis of dielectric film quality is carried out via electrical measurements of metal-insulator-metal (MIM) diodes. Anneals at 500 and 700 °C...
In this paper, we propose a credit-based resource allocation technique for dynamic spectrum access (DSA) systems that is robust against malicious and selfi sh behaviors and ensures good overall system fairness performance while also allowing spectrum users to achieve high amounts of service. We also propose a new objective function...
We consider the problem of finding unknown patterns that are recurring across multiple sets. For example, finding multiple objects that are present in multiple images or a short DNA code that is repeated across multiple DNA sequences. We first consider a simple problem of finding a single unknown pattern in...
In modern digital communication systems, error correction codes (ECC) are widely used and play an important role. The main effect of ECCs is to reduce the transmission error caused by channel noise, thereby protecting data and increasing the quality of information transmission. In addition, high spectral efficiency is desired in...
Gibbs sampling method is an important tool used in parameter estimation for many probabilistic models. Specifically, for many scenarios, it is difficult to generate high-dimensional data samples from its joint distribution. The Gibbs sampling provides a way to draw high-dimensional data via the conditional distributions which are typically easier to...
Renewable energy, particularly wind power, has increased dramatically over the past two decades. In the Pacific Northwest, the power system has accommodated a large amount of new wind power. The variability of wind power has introduced many challenges, requiring additional reserve generation to be available to maintain system stability. The...
Sensors find a variety of applications in portable electronics, automotive and biomedical solutions. The demand for low power and high dynamic range makes the design of digital sensor readout circuits quite challenging. Traditionally, these circuits are realized using amplifiers with passive feedback or precision analog comparators which are power hungry...