Index Catalog // ScholarsArchive@OSU

Creator:: Ghatak, Kalyan Brata
Abstract:: The parasitic components of MOS switches at high speeds affect the linearity and resolution of CMOS sample and hold circuits. CCD-based circuit design can offer good performance at high speeds. This thesis presents the design of sample and hold circuits using charge-coupled device structures in a standard CMOS process. Three...
Resource Type:: Masters Thesis
Full Text:: S/Hs have been characterized using a continuous- time integrator and a zE ADC. The CCDs, with a

Creator:: Yokoyama, Tomoe
Abstract:: The goal of this thesis study is to develop an activated reactive evaporation (ARE) system and to demonstrate its utility by fabricating-alternating current thin-film electroluminescent (ACTFEL) oxide phosphor devices. ARE entails evaporation in an activated gas. The main ARE system components are three thermal evaporation sources, a microwave power supply,...
Resource Type:: Masters Thesis
Full Text:: approximately 2 nm/s. As-deposited films are trans- parent, insulating, and amorphous with an index of

Creator:: Ramakrishna, Pavan Kumar
Abstract:: The CMOS two-stage Operational Transconductance Amplifier (OTA) has been a key enabler for mixed-signal IC design for nearly four decades . This research focuses on a modified two-stage CMOS OTA that features load-pole cancellation (LPC); i.e., the resulting architecture is essentially a two-stage CMOS OTA with no load capacitance. The...
Resource Type:: Masters Thesis
Full Text:: high school teachers, Lakshmi Narayana Rao for all the valuable life lessons and T. K. Prasanna Murthy

Creator:: Cook, Jacob M.
Abstract:: Within the past decade, the continued-scaling of CMOS processes and improvements in industry mixed-signal integrated-circuit designs have enabled a rapid decrease in the cost, form-factor, and power for point-of-care diagnostics and electrochemical instrumentation. Similarly, advances in low-power RF designs have prompted entire System-on-Modules supporting widely varied Internet-of-Things (IoT) applications. The...
Resource Type:: Masters Thesis

Creator:: Venkatesan, Rudhrakumar
Abstract:: Ad Hoc networks are multi-hop wireless networks consisting of mobile hosts. They do not have any pre-existing network infrastructure and are characterized by constantly changing topology, limited battery power and bandwidth. Typical applications of such networks are battlefield networks, medical relief during natural calamities or disasters, conference room networking, and...
Resource Type:: Masters Thesis
Full Text:: Region 7 Region 6 Region B Regio 9 Region 10 2 Node H NodeD 2 NodeD Regioi / ___________ / 14 Node S

Creator:: Bhattacharji, Pranathi
Abstract:: The primary objective of a grid is to maintain a balance between generation and load. If these quantities are not in balance with each other, severe damages such as voltage fluctuations, low power quality, power outages or even cascaded blackouts may occur. Hence one of the primary factors that holds...
Resource Type:: Masters Thesis
Full Text:: and turbine, kg.m² m = angular velocity of the rotor, rad/s t = time, s Equation (2) can be

Creator:: Schmid, Andreas
Abstract:: Since its introduction in the early 1990s, the quick growth of the World Wide Web (WWW) traffic raises the question of whether past Local Area Network (LAN) packet traces still reflect the current situation or whether they have become obsolete. For this thesis, several LAN packet traces were obtained by...
Resource Type:: Masters Thesis
Full Text:: /s to some Gb/s. Network interfaces have become faster and more efficient protocol implementations

Creator:: Lin, Shijia
Abstract:: Transparent conductive oxides (TCOs), primarily indium doped tin oxide, have been widely used in numerous fields since decades ago, such as solar cells, displays, OLEDs and ‘smart windows’ etc. Owing to the scarcity of indium, there is a great demand for new alternative materials. Metal/insulator/metal (MIM) diodes are a critical...
Resource Type:: Masters Thesis

ScholarsArchive@OSU