High speed serial links are critical components for addressing the growing demand for I/O bandwidth in next-generation computing applications, such as many-core systems, backplane and optical data communications. Due to continued process scaling and circuit innovations, today's CMOS serial link transceivers can achieve tens of Gb/s per pin. However, most...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
This thesis presents a simulation technique for the
post-detection of a point-source trajectory in an
isotropic, stationary random medium. The two-dimensional
source location is estimated from spatially correlated
angle-of-arrival data which are collected simultaneously at
two sensor positions. We assume that the data are collected
at discrete, constant time intervals...
This work presents the design and implementation of a low power phased-array receiver frontend at 28 GHz in 65 nm CMOS. The frontend incorporates a low- power low-noise amplifier(LNA) and a passive reflection-type phase shifter (RTPS) capable of providing 360° phase shift with 5-bit phase resolution and low loss variation....
Electroanalytical techniques allow scientists and engineers to characterize bulk solutions as well as interfaces. Potentiostats are commonly used by researchers in a variety of disciplines to analyze the chemistry which occurs at a working electrode surface. Advancements in microelectronics and the proliferation of open-source designs have allowed researchers to construct...
Present day data processing technology requires very high speed signal processing and data conversion rates. One such application which requires high speed is switched capacitor circuits used in Sigma-Delta modulators. A major active component of switched capacitor circuits is the monolithic operational amplifier(opamp). Because of the relatively poor speed performance...
Currently available soil moisture sensors have intrinsic limitations that limit their adoption by industry. Depending on the technology, these limitations may include high costs, battery requirements, precice manual installation, high cost, and/or constrictive legislation that regulates their use. A passive soil moisture sensing system based around RFID technology would allay...
Millimeter-wave (mm-wave) technology promises high speed, high system capacity and low latency interconnects with reduced cost. Applications like high data-rate wireless links, next generation automotive sensors and security body scanners highly depend on mm-wave technology innovations. As operating frequency moves to higher mm-wave bands, shrinking antenna dimensions enable co-integration of...