This research aims to demonstrate the viability of actively controlled distributed-electric propulsion as a method to postpone flutter in high aspect-ratio elastic wings. A semi-wing on a spring mount with two propellers powered by electric motors, mounted at alternate pitch angles relative to the chord line, was used as the...
The intent of this report is to provide a brief description of water quality issues in Nicaragua, Uganda and Bangladesh, and the technologies available to address these issues. The water quality parameters considered include: bacterial contamination, heavy metals and arsenic, pesticides and industrious chemicals, turbidity, radiological characteristics, and taste and...
Aperiodic structures cause significant challenges to subtractive manufacturing methods due to the common features such as inaccessible voids within the structure. Additive man- ufacturing presents an appealing alternative for this purpose. The aim of this research is to test analysis heuristics for validity through application to periodic structures. First, a...
Modern walking robots have shown that dynamic gaits can be achieved without ankle motors. It seems logical that the additional control authority that they provide can be used to improve the stability of the walking gait against foot placement errors caused by low level control. This thesis develops and compares...
There is a growing US interest in UAVs for many applications ranging from agriculture to military. One area of improvement that can be realized in each category is propulsion. Engines with greater efficiency would result in longer mission duration, leading to cost savings and increased usefulness for UAV owners and...
This project created a stand-alone unit capable of providing on-board sensing and processing for robotic vehicles. This unit was designed to be compact, lightweight, inexpensive, and adaptable. The goal of this project is to help advance robotics research in mapping and multi-agent coordination by making it easier to equip vehicles...
The purpose of this project is to assist the OSU Baja Racing vehicle in turning more sharply. This is done using a turning brake, which locks one rear wheel to facilitate turning on a smaller radius. This project focuses on the development of a custom cylinder housing for the turning...
After traveling to Africa and experiencing the struggles and confusion of interacting with a new culture, I saw the need for some sort of orientation device that would adequately prepare first timers, but also not be too lengthy and daunting for a person that will only be spending a few...
Integrated Distributed Electric Augmented Lift (IDEAL) applies upper surface blowing in a novel way to achieve electric short take-off and landing to meet the growing need for urban air transportation. Additional research on propulsion airframe interaction (PAI) with trailing edge flaps at low Reynolds numbers was necessary to advance the...
The “why” of any situation is one of the most important questions to ask. Inventors have ideas every day. Some ideas are the brilliant ideas that lead to a better tomorrow. To protect these ideas, inventors turn to patents, a governmental grant of the right to stop others, for a...
Pulsed laser deposition was used to create 0.1-Bi(Zn₀.₅ Ti₀.₅)O₃-0.9-BaTiO₃ (BZT-BT) thin films to examine the effects of laser energy (2.25 or 2.5 J/cm²) , pulse frequency (2 Hz or 5 Hz), and deposition temperature (550, 600, 650, and 700°C) on the electrical properties of the films. These effects were analyzed...
Non-destructive testing is a methodology to inspect production and operational parts for potential flaws, defects, or damages. The present work is based on pulsed wave thermography, a thermal imaging method based on heat conduction to identify surface and subsurface defects potentially present in a component. Pulsed wave thermography applies a...
In the wake of climate change, the risk of heat related illnesses has continuously increased over the past several decades. While thermal management solutions have continued to improve, there is a need for efficient cooling systems that conform with the human body. This study combines the solutions from fractal-like flow...
A new thermal management method for hotspots on microprocessors is under development that employs confined pool boiling with vapor extraction at pre-determined nucleation sites. Extraction is accomplished by locating a vacuum chamber constructed out of a glass tube and a hydrophobic membrane directly above a nucleation site. In order to...
People often grow increasingly culturally confused when spending significant amounts of time in a foreign land. Identity can become lost only to reform in the image of the host society. This thesis presents a creative nonfiction series of essays that explore the author’s loss of self and contextual identity, the...
The world is currently using an unsustainable system of meeting its transportation
needs with oil. This system is taking a toll on the world environment and on global politics.
The physical availability of oil is the system’s most immediate problem and will most likely
bring about a transition away from...
The SpiderHarp is a bio-inspired electronic musical instrument that uses a localization algorithm developed at Oregon State University to translate plucks of its strings into musical notes. This localization algorithm was inspired by the way spiders locate prey in their webs. The SpiderHarp frame, sensors, and web design are also...
For many years, engine overhearing has been the major cause for vehicle breakdowns and engine malfunctions for most teams in Endurance events at Formula Society of Automotive Engineers (FSAE) Series competitions. Additionally, with a growing importance of aerodynamics to the overall success of the Global Formula Racing at these events,...
A student-built lap time simulation coupled with the scoring model of the Formula Society of Automotive Engineers (SAE) Series has revealed the major importance of downforce on overall points. As a result, the Global Formula Racing (GFR) team has recently focused much effort towards the development of an aerodynamics package...
The intention of this undergraduate research project was to design and build a fully functional high-vacuum chamber testing environment for use in the development of ion propulsion engines. This project was conducted in an effort to aid ongoing projects between the Deep Space Propulsion Group (DSPG) at Oregon State University...