Index Catalog // ScholarsArchive@OSU

The Indian New Deal and the Effects it had on Federally Recognized Tribes

Creator:: Hall, Gabriann
Abstract:: This paper covers the impact of Franklin D Roosevelt's, "Indian New Deal" and the effect it had on federally recognized Indian tribes. I have taken an in-depth look at specific areas of New Deal legislation including the Indian Reorganization Act, the Johnson O'Malley Act, and the Indian Arts and Crafts...
Resource Type:: Masters Thesis
Full Text:: New Deal was the Johnson-O'Malley Act (JOM) which became law on April 16, 1934. JOM authorized

Processing effects on the ductility of chromium-vanadium alloys

Creator:: Murdock, Hailey M.
Abstract:: The next generation of high temperature structural alloys must exhibit exceptional resistance to fracture, creep, oxidation, and fatigue at high temperatures. Chromium is being considered due to its high melting point (>1800°C), relatively low density (~7.2 g/cc), high temperature strength, and oxidation resistance. Limiting the use of chromium is its...
Resource Type:: Masters Thesis

Development of mullite-zirconia composite feedstocks for powder injection molding

Creator:: Martin, Renee A.
Abstract:: Mullite-zirconia composites have been slated for use in a novel miniature ceramic turbine engine components developed for unmanned air vehicle (UAV) engine applications. Economically feasible production of these complex components requires the use of a near-net shape process such as powder injection molding (PIM). This thesis explores the development and...
Resource Type:: Masters Thesis
Full Text:: accepted for publication as a research article in JOM. Appendices A and B contain the experimental

Gender and ethnic issues in parenting : a study of some determinants of parenting in American Indian and non-Indian families

Creator:: Kawamoto, Walter T.
Abstract:: An analysis was conducted to test current theories regarding education, income, and marital satisfaction as determinants of parenting in different ways for men and women. The gender specific issues in parenting to be tested were: 1) Education is positively related to parental involvement for both men and women. 2) Marital...
Resource Type:: Masters Thesis
Full Text:: , Johnson 0' Malley (JOM) Education Outreach Coordinator Lavina Moceikis chose to notify Indian families

Models for predicting powder-polymer properties and their use in injection molding simulations of aluminum nitride

Creator:: Kate, Kunal H.
Abstract:: Powder injection molding (PIM) is widely used to manufacture complex-shaped ceramic and metal components in high production volumes. In order to design and fabricate PIM components, it is important to know a number of material properties at different powder- polymer compositions. In this thesis, several predictive models for estimating rheological,...
Resource Type:: Masters Thesis
Full Text:: 3 has been published in JOM and is currently ranked among the five most-read articles published in

Synthesis and characterization of Cu-reinforced Zr₄₁.₂Ti₁₃.₈Cu₄₁.₂Ni₁₀Be ₂₂.₅ bulk metallic glass forming alloy

Creator:: Wadhwa, Prashant
Abstract:: The development of amorphous metal alloys with high glass forming ability allows the fabrication of amorphous samples with thickness greater than 1mm, known as bulk metallic glasses(BMGs). Outstanding mechanical properties and ease in processing due to low melting points, low solidification shrinkage and higher supercooled liquid region make BMG a...
Resource Type:: Masters Thesis

Continuous cooling transformation diagram from modified end-quench method

Creator:: Anderson, Donald Evans
Resource Type:: Masters Thesis
Full Text:: ! _ _ 'p _ Interval Coo/ed in Jom/ny End-Quench Mac/i/ne, Seconds 2-1/2 /2 ¿l-1/2 7/8 f -3/4

Certain correlations between leaf area and the fruit production of red raspberries

Creator:: Khanmai, Mohamad Aslam
Resource Type:: Masters Thesis
Full Text:: Jxme 1958 APPSOVlDt ii ii i + i i < I I ii t xt^gf^mtmeAf- ITilT JOm^Smm : i I i n it

Significance of Grain Refinement on High Entropy Alloys Processed through High-Pressure Torsion

Creator:: Wenrui, Zhao
Abstract:: High entropy alloys (HEAs) are well known for their excellent mechanical properties compared to conventional metallic alloys. The application of High-Pressure Torsion (HPT) processing reduces grain size of materials away below 1 µm. This significant grain refinement leads to an improvement in mechanical properties, such as strength and ductility. In...
Resource Type:: Masters Thesis

Synthesis and Characterization of an Ultrafine-Grained Aluminum-Copper System through High-Pressure Torsion

Creator:: Liang, Guangyuan
Abstract:: Aluminum and copper and their alloys have been widely used due to relatively high strength-to-weight ratios compared with conventional steels. Processing of these alloys is typically conducted at high temperatures over extended time periods. High-pressure torsion (HPT) is a promising processing technique for introducing significant grain refinement leading to excellent...
Resource Type:: Masters Thesis

Development of an adventitious shoot regeneration system in cherries

Creator:: Meneghelli, Luigi P.
Abstract:: Shoot regeneration in vitro is a difficult problem for cherry species. This study addressed three approaches to the problem, regeneration of adventitious shoots from roots and leaves of mature cherry clones, and from cotyledons of open-pollinated 'Royal Ann' cotyledons. Regeneration on roots occurred at a very low frequency. Adventitious shoots...
Resource Type:: Masters Thesis
Full Text:: response to variation of IB A (|JM) and TDZ (joM) in the regeneration medium 13 2. Meristem formation on

Efficiency of certain flavone-type compounds as antioxidants for dairy products

Creator:: Erickson, David Rae
Resource Type:: Masters Thesis
Full Text:: OF ADDiTION OF JOm°7a Q BEFORE RND flFTER 5TEuRIZ.flhiON ON THE DEVELOPMENT OF OXIPflON OF PuLK

Quality evaluation of canned bush snap beans grown in Oregon

Creator:: Arat, Mehmet Arif
Resource Type:: Masters Thesis
Full Text:: Tork^ JoM ?iJ£l©yt- 3.936. 347-357 P* (2). 37- WfrckUnan* A<, 0. Jood Analysis. 4tli ed

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Creator:: Bozeman, Scott C.
Abstract:: Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
Resource Type:: Masters Thesis
Full Text:: , “Advanced Manufacturing for Nuclear Energy,” Jom, vol. 71, no. 8, pp. 2834–2836, 2019, doi: 10.1007/s11837

Synthesis of Heterostructured Aluminum-magnesium System with Extreme Specific Strength Through the Application of High-pressure Torsion

Creator:: Han, Jae-Kyung
Abstract:: Processing of metals through the application of high-pressure torsion (HPT) provides significant grain refinement in bulk metals at ambient temperatures. The ultrafine-grained (UFG) materials processed by HPT generally demonstrate the superior physical and mechanical characteristics. For utilizing the benefit of HPT, the feasibility of conventional HPT processing was demonstrated recently...
Resource Type:: Masters Thesis

Computational Investigation on the Effects of Arc Location in Vacuum Arc Remelting

Creator:: Soler, Miguel
Abstract:: Vacuum arc remelting (VAR) is a secondary melting process for exotic alloys. The main purpose of this process is to increase the input ingot’s physical and chemical homogeneity. This is accomplished through the application of a high current that melts the material through the emergence of electrical arcs that induce...
Resource Type:: Masters Thesis

Investigating arc behavior in a DC vacuum arc remelting furnace using magnetic flux density measurements

Creator:: Woodside, Rigel
Abstract:: The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
Resource Type:: Masters Thesis

Reactivity Testing of Waterglass and the Investigation into an Alternative Binder Enhanced with Cellulose Nanocrystals

Creator:: McAlexander, Melissa
Abstract:: Most of the concrete in the world is produced using hydraulic cement (ordinary portland cement, OPC) and siliceous or alumino-siliceous supplementary cementitious materials (SCM). Due to the shift in focus toward environmental sustainability within the construction industry, alkali-activated cementitious systems (AAC) have gained significant attention to reduce the carbon footprint...
Resource Type:: Masters Thesis

Processing of nanoscale materials

Creator:: Hostetler, Eric B.
Abstract:: The motivation for undertaking this research was to increase the understanding of processing colloidal semiconductor nanocrystals and thin films metallic glasses to enable their wider application in future devices. This research covered two unique materials, lead selenide (PbSe) nanocrystals and thin film metallic glass alloy of zirconium copper aluminum nickel...
Resource Type:: Masters Thesis

Nano-Recrystallized UO₂ Microcantilever Bending After Ion Irradiation

Creator:: Cullison, Mack
Abstract:: Idaho National Laboratories recently conducted micromechanical testing of nano-recrystallized UO₂ as a part of an ongoing investigation of High Burnup Structure (HBS). The goals of the test were to determine the fracture stress, and the elastic modulus of subdivided grains within UO₂ using ion irradiation rather than neutron irradiation to...
Resource Type:: Masters Thesis

Search Constraints

Search Results

Limit your search