Index Catalog // ScholarsArchive@OSU

The Effects of Temperature on Electrical Resistivity Measurements of Concrete

Creator:: Coyle, Alex T.
Abstract:: Measuring resistivity as a method to calculate formation factor is becoming a popular way to evaluate transport properties of concrete. Resistivity measurements are dependent on multiple factors including the resistivity of the pore solution, leaching effects, the degree of saturation of the specimen, the age of the specimen (degree of...
Resource Type:: Masters Thesis

Non-destructive determination of yield stress for in-situ gusset plates

Creator:: Pflaum, Therese Michelle
Abstract:: Failure of a gusset plate that caused the I-35W Bridge collapse in Minneapolis, MN resulted in mandated rating of connections by the Federal Highway Administration (FHWA). Rating connections requires material properties as an input. The material properties are generally reported on the available detailed drawings for bridges. However, some bridges...
Resource Type:: Masters Thesis
Full Text:: him. Also, I would like to thank Dr. Andre Barbosa, Dr. Burkan Isgor, and Dr. John Sessions for

Assessing Durability of Concrete and Ettringite Accelerated Cementitious System

Creator:: Sarkar, Anika T.
Abstract:: The goal of the first part of this project was to investigate the influence of aggregate source and entrained air on the transport properties of concrete. Currently, there are several ASTM standards available that provide systematic procedures to evaluate mass transport properties of concrete. ASTM C642-13 (ASTM 2013), often referred...
Resource Type:: Capstone Project
Full Text:: family. I would also like to thank my committee members, Dr. O. Burkan Isgor and Dr. Erdem Coleri, for

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Creator:: Bozeman, Scott C.
Abstract:: Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
Resource Type:: Masters Thesis
Full Text:: , doi: 10.1016/j.jmatprotec.2019.05.024. [17] P. Murkute, S. Pasebani, and O. Burkan Isgor

Synthetic Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature

Creator:: Marr, Carter J.
Abstract:: The goal of this paper is to evaluate how synthetic lubricants perform in an enclosed gearbox application when compared with a proven mineral oil. This is in an effort to improve gearbox efficiency with the desired effect of lower emissions from of improved energy output from power generation. Four liquid...
Resource Type:: Masters Thesis
Full Text:: Jones, Karl R. Haapala, O. Burkan Isgor, John Parmigiani 4 Chapter 2: Lubrication performance

The Evaluation of Cementitious Pore Solution Composition and Electrical Resistivity Using X-ray Fluorescence (XRF)

Creator:: Tsui Chang, Marisol
Abstract:: Interest in performance specifications has been growing in the civil and construction industry in the past decade. One major focus area has been on understanding how to prolong the service life of concrete structures, since repair and rehabilitation of existing infrastructure have cost many trillions of dollars. Deterioration mechanisms such...
Resource Type:: Masters Thesis
Full Text:: ), Dr. Prannoy Suraneni (post-doctoral researcher), Dr. O. Burkan Isgor (professor), and Dr. David

Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

Creator:: Quintana, Xavier A.
Abstract:: Molten salts have been targeted as a promising coolant for next generation reactors due to their high boiling point, heat capacity, and thermal conductivity. Despite these benefits, molten salt systems present unique materials compatibility issues, highlighted by the aggressive corrosion attack and dealloying typically seen on materials in these environments....
Resource Type:: Masters Thesis

Improving the Performance of High Early Strength Concrete by Controlling Self-Desiccation and Mitigating Shrinkage

Creator:: Wilson, Cameron A.
Abstract:: High early strength (HES) concrete is becoming increasingly used to repair damaged concrete pavement sections. The use of HES concrete enables the repaired pavement to be opened to traffic within hours of placing the concrete. A common approach used for the rapid repair of concrete pavement consists of closing a...
Resource Type:: Masters Thesis

High Strength Reinforcing Bars : Concrete Shear Friction Interface Behavior

Creator:: Nielson, Drew R.
Abstract:: Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Resource Type:: Masters Thesis
Full Text:: graduate research assistant. I would also like to thank Dr. Burkan Isgor and Dr. David Myrold for serving

Seismic Performance of Aging Prestressed Transmission Pole with Simulated Soil Foundation

Creator:: Argo, Maximo
Abstract:: The Cascadia Subduction Zone has recently been identified as a source for an impending great earthquake. The potential of a large earthquake has created widespread interest into the resiliency of lifelines within the potentially affected areas. One critical lifeline is the electrical distribution and transmission systems which relies on legacy...
Resource Type:: Masters Thesis
Full Text:: Argo, Author ACKNOWLEDGEMENTS I would like to sincerely thank Dr. Chris Higgins, Dr. Burkan

ScholarsArchive@OSU

The Effects of Temperature on Electrical Resistivity Measurements of Concrete

Non-destructive determination of yield stress for in-situ gusset plates

Assessing Durability of Concrete and Ettringite Accelerated Cementitious System

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Synthetic Lubricant Performance in Enclosed Gearbox Applications at Extreme Temperature

The Evaluation of Cementitious Pore Solution Composition and Electrical Resistivity Using X-ray Fluorescence (XRF)

Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

Improving the Performance of High Early Strength Concrete by Controlling Self-Desiccation and Mitigating Shrinkage

High Strength Reinforcing Bars : Concrete Shear Friction Interface Behavior

Seismic Performance of Aging Prestressed Transmission Pole with Simulated Soil Foundation

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search