Index Catalog // ScholarsArchive@OSU

The effect of hot-boning and pre-rigor pressurization of boneless beef cuts on yield of trimmed retail cuts and other factors of economic importance

Creator:: Schumann, Michael Shawn
Resource Type:: Masters Thesis
Full Text:: wish to thank my graduate committee, Prof. J. Oldfield, Prof. M. Amano, and Assoc. Prof. Z.A. Holmes

Investigation of the fundamentals of fluorescent behavior of kraft-anthraquinone pulping liquors

Creator:: Perfecto Segoviano, Ignacio
Abstract:: The kraft and kraft-anthraquinone pulping processes were used for pulping Douglas-fir chips at 170°C, 180°C and 190°C temperatures. Anthraquinone was added to the pulping liquor at two levels, 0.1% and 0.2% based on wood, to study its effect on pulp delignification at the three temperatures. The fluorescent behaviors of kraft...
Resource Type:: Masters Thesis

SIMstat: Wireless, Highly-Reconfigurable Electrochemical Analog Front-End for Point-of-Care Diagnostics and Continuous Monitoring

Creator:: Cook, Jacob M.
Abstract:: Within the past decade, the continued-scaling of CMOS processes and improvements in industry mixed-signal integrated-circuit designs have enabled a rapid decrease in the cost, form-factor, and power for point-of-care diagnostics and electrochemical instrumentation. Similarly, advances in low-power RF designs have prompted entire System-on-Modules supporting widely varied Internet-of-Things (IoT) applications. The...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE MASTERS THESIS OF Jacob Matthew Cook

Automated Design of Foam Packaging Shapes

Creator:: So, David M.
Abstract:: Creating effective packaging is about finding a balance between product protection during shipping and time consumption in the design process. Given time and cost constraints, it is hard to produce sufficiently protective padding while having it not be thicker than it needs to be. This thesis describes a method to...
Resource Type:: Masters Thesis
Full Text:: approved: _____________________________________________________ Matthew I. Campbell Creating

Diversity and abundance of birds across a hardwood gradient in early seral Douglas-fir plantations

Creator:: Ellis, Tana M.
Abstract:: Recent evidence suggests that population declines of some avian species may be driven primarily by reduced quantity and diversity of early-successional habitat on the breeding grounds. Increasing intensity of forest management on private lands and decreased harvest rates on federal lands has resulted in a loss of the diverse early-successional...
Resource Type:: Masters Thesis
Full Text:: . _________________________________________________________________ Tana M. Ellis, Author CONTRIBUTION OF AUTHORS Dr. Matthew G. Betts contributed to

Overstory Growth, Structural Development, and Regeneration Success Following Uneven-Aged Conversion Treatments in Douglas-fir Plantation of the Cascade Range in Oregon

Creator:: Marcum, Sean R.
Abstract:: Uneven-aged management has been suggested as a method for balancing biodiversity conservation and wood production goals from managed forests in a variety of regions. In coastal Douglas-fir (Pseudotsuga menziesii) forests of the Pacific Northwest, implementation of uneven-aged management is hindered by a lack of experience with uneven-aged silvicultural systems, including...
Resource Type:: Masters Thesis
Full Text:: :______________________________________________________________ Matthew Powers Uneven-aged management has been suggested as a method for balancing

Automated Tradeoff Analysis of Cost Versus Machinability for Design Feedback

Creator:: Grier, Alan Thomas
Abstract:: As CAD tools become more sophisticated, engineers are able to more easily create complex part geometries with minimal mass given strength and stiffness requirements. However, these complex part geometries can be difficult to subtractively manufacture, which consequently increases manufacturing cost and production time. This thesis presents a method independent of...
Resource Type:: Masters Thesis
Full Text:: Analysis of Cost Versus Machinability for Design Feedback Abstract approved: Matthew I. Campbell As CAD

Design and Modeling Techniques for Impedance Based Flow Cytometry

Creator:: Dawes, Jacob
Abstract:: Microfluidic devices have enabled lab-on-a-chip (LOC) systems that allow for complex sample analysis and preparation in a compact form factor. One technology that may benefit from a microfluidic approach and further miniaturization is flow cytometry. Flow cytometry is an analysis technique for enumerating and characterizing populations of cells; this is...
Resource Type:: Masters Thesis
Full Text:: Modeling Techniques for Impedance-Based Flow Cytometry Abstract approved: Matthew Johnston Microfluidic

Automated Synthesis of Planar Mechanisms with Revolute, Prismatic and Pin-In-Slot Joints

Creator:: Huang, Weifeng
Abstract:: The intent of this research is to explore the entire design space of mechanism topologies by using a graph grammar synthesis approach. A new graph representation of planer mechanism has been developed to represent the planar mechanism with revolute (R), prismatic (P), and pin-in-slot (RP) joints. Following Gruebler's equation, the...
Resource Type:: Masters Thesis
Full Text:: : ______________________________________________________ Matthew I. Campbell The intent of this research is to explore the entire design space of

The tools of the radar system engineer

Creator:: Skene, Emerson Matthew
Resource Type:: Masters Thesis
Full Text:: RADAR SYSTEM ENGINEER by EMERSON M&TTHEW SKENE A THESIS submitted to OREGON STATE COLIOE in

ScholarsArchive@OSU

The effect of hot-boning and pre-rigor pressurization of boneless beef cuts on yield of trimmed retail cuts and other factors of economic importance

Investigation of the fundamentals of fluorescent behavior of kraft-anthraquinone pulping liquors

SIMstat: Wireless, Highly-Reconfigurable Electrochemical Analog Front-End for Point-of-Care Diagnostics and Continuous Monitoring

Automated Design of Foam Packaging Shapes

Diversity and abundance of birds across a hardwood gradient in early seral Douglas-fir plantations

Overstory Growth, Structural Development, and Regeneration Success Following Uneven-Aged Conversion Treatments in Douglas-fir Plantation of the Cascade Range in Oregon

Automated Tradeoff Analysis of Cost Versus Machinability for Design Feedback

Design and Modeling Techniques for Impedance Based Flow Cytometry

Automated Synthesis of Planar Mechanisms with Revolute, Prismatic and Pin-In-Slot Joints

The tools of the radar system engineer

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search