Search Constraints

Start Over
Filtering by: Creator Tucker, J. D. Remove constraint Creator: Tucker, J. D. Degree Name Master of Science (M.S.) Remove constraint Degree Name: Master of Science (M.S.)

Search Results

  • Prompt gamma neutron activation analysis of niobium for characterization of light interstitials

    Creator:
    Love, Ian J.
    Abstract:
    High purity niobium metal is used in the construction of superconducting radio frequency (SRF) cavities in superconducting particle accelerators, such as the Large Hadron Collider (LHC) at CERN or the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The usual method for characterizing the impurities in this niobium, the...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Julie D. Tucker High purity niobium metal is used in the construction of superconducting

  • Acceleration of Long-Range Ordering in NiCrFe Alloys Via Proton Irradiation

    Creator:
    Evered, Cole E.
    Abstract:
    This work explores the hypothesis that proton irradiation is a feasible alternative to simulate accelerated thermal aging for Ni2Cr long-range ordered phase formation within NiCr and NiCrFe alloys. In this study, various model alloys and commercial alloys 690 and 690+P (0.01 wt.% P) were subject to 2 MeV proton irradiation...
    Resource Type:
    Masters Thesis
    Full Text:
    Irradiation Abstract approved: ______________________________________________________ Julie D

  • Role of Alloying on the Thermal Stability of Duplex Stainless Steel

    Creator:
    Garfinkel, David
    Abstract:
    Duplex stainless steels (DSS) are an attractive potential material in nuclear power generation systems due to an excellent combination of corrosion resistance, strength, toughness, and affordability. Thermal embrittlement caused by phase instability in the temperature range of ~300-550°C severely limits the service temperature of DSS. The rate of embrittlement varies...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Julie D. Tucker Duplex stainless steels (DSS) are an attractive potential material in

  • The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

    Creator:
    Bozeman, Scott C.
    Abstract:
    Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
    Resource Type:
    Masters Thesis
    Full Text:
    , vol. 154, no. April, pp. 49–60, 2019, doi: 10.1016/j.corsci.2019.03.027. [20] S. W. Kim, D. J. Kim

  • Exploring the Ductility Minimum of Niobium C103 at Intermediate Temperatures using Triaxial Tensile Specimens

    Creator:
    Wood, Thomas N., II
    Abstract:
    This work explores the mechanical properties of single-phase niobium alloy C103 from room temperature to 600°C for the purpose of expanding safe uses of the material into new applications. The study utilizes a symmetrically notched triaxial tensile specimens to manipulate the internal stress field in order to observe the changes...
    Resource Type:
    Masters Thesis
    Full Text:
    Julie D. Tucker This work explores the mechanical properties of single-phase niobium alloy C103

  • Heat Treatment Effects on the Mechanical Properties and Microstructure of CPM-M4 Tool Steel

    Creator:
    Fast, Cody P.
    Abstract:
    Variations in heat treatments have significant effects on the microstructure of tool steels. For CPM-M4 tool steel, the changes in microstructure and mechanical properties were observed based off of variations in temperature. Five heat treatments with constant exposure time and variable austenitizing and tempering temperatures were performed on samples of...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: ______________________________________________________ Julie D. Tucker

  • Microstructural Characterization of Porosity in U-Mo Low Enriched Uranium Plate Fuel

    Creator:
    Westman, Bjorn E.
    Abstract:
    New low enriched uranium (LEU) fuels are being developed for replacement of high enriched uranium (HEU) fuels in high power research reactors. U-Mo LEU plate fuels have been identified as a candidate for replacement of current HEU fuels. However, U-Mo fuels tend to exhibit accelerated swelling typically at fission densities...
    Resource Type:
    Masters Thesis
    Full Text:
    Abstract approved: ______________________________________________________ Julie D

  • Role of Stoichiometry on Ordering in Ni-Cr Alloys

    Creator:
    Teng, Fei
    Abstract:
    Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni-Cr binary system (e.g., Inconel 690, 625), particularly in nuclear power applications where component lifetimes can exceed 40 years. In the present research, the disorder-order phase transformation, which is the primary mechanism of ageing,...
    Resource Type:
    Masters Thesis
    Full Text:
    : Role of Stoichiometry on Ordering in Ni-Cr Alloys Abstract approved: Julie D. Tucker

  • Corrosion of Carbon and Stainless Steels in H₂O-sCO₂ Environments for Power Cycle Applications

    Creator:
    Teeter, Lucas
    Abstract:
    The corrosion behaviors of carbon and stainless steels were investigated in supercritical CO₂ (sCO₂ ) containing H₂O and O₂ simulating conditions that exist in direct sCO₂ power cycle heat exchangers. Thermodynamic properties of CO₂-H₂O-O₂ systems related to the corrosion phenomena were determined using NIST software. The exposure tests of the...
    Resource Type:
    Masters Thesis
    Full Text:
    Stainless Steels in H2O-sCO2 Environments for Power Cycle Applications Abstract approved: Julie Tucker

  • Corrosion Resistance of Alloys in Seawater and Supercritical Carbon Dioxide Environments

    Creator:
    Repukaiti, Reyixiati
    Abstract:
    The corrosion resistances of several alloys were investigated to optimize performance and cost in seawater and supercritical CO2 environments. Many alloys are prone to corrosion in seawater and/or supercritical CO2 containing impurity environments. Exposure and electrochemical experiments were conducted in both environments to evaluate alloys’ corrosion resistance. In seawater corrosion...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: ______________________________________________________ Julie Tucker The corrosion