Search Constraints

Start Over
Filtering by: Subject Titanium alloys -- Thermal properties Remove constraint Subject: Titanium alloys -- Thermal properties Peer Reviewed No Remove constraint Peer Reviewed: No

Search Results

  • Microstructural banding in thermally and mechanically processed titanium 6242

    Creator:
    Kansal, Utkarsh
    Abstract:
    Ti-6Al-2Sn-4Zr-2Mo-0.1Si specimens were shaped by repeated cycles of heating (to 954 °C) and hammer or press forging followed by a solution anneal that varied from 968 to 998 °C. The coupons were originally extracted from billets forged below the beta trans us ( 1009 °C) and slow cooled to ambient...
    Resource Type:
    Masters Thesis
    Full Text:
    observed as reported in some other 043 titanium alloy investigations. 4. It appears that the observed

  • Thermodynamics of the Pd₄₃Ni₁₀Cu₂₇P₂₀ metallic glass-forming alloy

    Creator:
    Kuno, Masahiro
    Abstract:
    By the investigation of the bulk metallic glass-forming liquids that have very low critical cooling rates, the thermodynamics of metallic glasses can be clarified. For studying thermodynamic properties, such as the specific heat capacity, calorimetry (DSC) is utilized and one of the most used instruments is the differential scanning calorimeter....
    Resource Type:
    Masters Thesis
    Full Text:
    alloy AN ABSTRACT OF THE THESIS OF Masahiro Kuno for the degree of Master of Science in Material

  • On the fragility and equilibrium phases of metallic glass forming alloys

    Creator:
    Shadowspeaker, Ludi A.
    Abstract:
    The heating rate dependence of the glass transition temperature of the Ni₆₅Nb₃₅, Ni₆₀Nb₃₅Sn₅, Ni₅₉.₃₅Nb₃₄.₄₅Sn62, Ni₆₀(Nb₄₀Ta₆₀)₃₄Sn₆, and Ni₅₇Fe₃Nb₃₅Sn₅ metallic glass forming alloys was investigated with a differential scanning calorimeter (DSC). The inverse heating rate for each DSC experiment was plotted versus inverse temperature and a Vogel-Fulcher- Tamman (VFT) type relation was...
    Resource Type:
    Masters Thesis
    Full Text:
    . This treatment assures that the samples have the same thermal history. When samples of the same alloy

  • Thermodynamis and kinetics of Zr₅₈̣₅Cu₁₅̣₆Ni₁₂̣₈Al₁₀̣₃Nb₂̣₈ bulk metallic glass forming alloy

    Creator:
    Shah, Minalben B.
    Abstract:
    Among recently found multi-component Zr-based bulk metallic glasses (BMG), Zr₅₈.₅Cu₁₅.₆Ni₁₂.₈Al₁₀.₃Nb₂.₈ is characterized by its lower critical cooling rate requirement and absence of beryllium as one of the constituent element which makes its handling more convenient. Its large supercooled liquid regions made possible the study of thermodynamics and kinetics of this...
    Resource Type:
    Masters Thesis
    Full Text:
    study of thermodynamics and kinetics of this alloy. Precise thermal measurements were performed using

  • Rheological measurements of bulk metallic glass forming alloys above the liquidus temperature

    Creator:
    Shaw, Tyler A.
    Abstract:
    A high temperature high vacuum rheometer has been designed, fabricated, and tested for the study of the steady shear viscosity for multicomponent bulk metallic glass forming alloys. This rheometer has an operating range up to 1525 K, rotational frequencies of 9.4*10⁻³-3.7*10¹ radians/s, and a calibrated viscosity range of 9.6*10⁻³ and...
    Resource Type:
    Dissertation
    Full Text:
    ...................................................................................................2 0-2: Increased interatomic distance with increased thermal energy............. 3 0-3: Two

  • Mechanical properties of Nb-Ti composite superconducting wires

    Creator:
    Liu, He
    Abstract:
    Mechanical properties of Nb-Ti composite superconducting wires were tested at room temperature. The results were analysed using simple composite theory, the rule of mixtures. The objective is to predict the mechanical properties of Nb-Ti superconducting composite wires as a function of volume ratio and geometry of the components, the composite...
    Resource Type:
    Masters Thesis
    Full Text:
    . The two primary commercial materials are niobium based superconductors; Nb-Ti, an alloy, and Nb3Sn