Index Catalog // ScholarsArchive@OSU

Evaluation of Setback Crosswalk to Mitigate Vehicle-Pedestrian Conflicts at Intersections

Creator:: Chai, Eileen Pei Ying
Abstract:: It is considered best practice when designing pedestrian access at intersections to provide two curb ramps at each street corner. In Oregon, there are many locations where long ramp runs cause curb ramps to be set back a significant distance from the apex of the intersection corner to meet this...
Resource Type:: Masters Thesis

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Creator:: Bozeman, Scott C.
Abstract:: Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
Resource Type:: Masters Thesis
Full Text:: Pressure Vessels and Piping, vol. 84, no. 8, pp. 469–474, 2007, doi: 10.1016/j.ijpvp.2007.04.004. 4

Simulating Soot Formation and Growth using a Parallel Coupled Monte Carlo Method

Creator:: Peters, Jordan
Abstract:: Small hydrocarbon particles such as soot and soot precursors pose a serious threat to human health and Earth's climate. Understanding the mechanisms by which soot particles form and grow is the first step to reducing the prevalence of these particles. Computational simulations are used to investigate combusting systems which are...
Resource Type:: Masters Thesis

Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

Creator:: Quintana, Xavier A.
Abstract:: Molten salts have been targeted as a promising coolant for next generation reactors due to their high boiling point, heat capacity, and thermal conductivity. Despite these benefits, molten salt systems present unique materials compatibility issues, highlighted by the aggressive corrosion attack and dealloying typically seen on materials in these environments....
Resource Type:: Masters Thesis

Leveraging multi-sensor time series datasets to map short- and long-term forest disturbances and drivers of change in the Colombian Andes

Creator:: Murillo Sandoval, Paulo Jose
Abstract:: The spatial distribution of forest disturbance is commonly calculated using a satellite imagery-driven bi- or tri-temporal change analysis. Working in Colombia’s Cordillera de los Picachos National Natural Park – a region of consistent cloud cover and dramatic topographic relief – a change assessment with such infrequent observations cannot capture long-term...
Resource Type:: Masters Thesis
Full Text:: analysis: a review. International Journal of Disaster Risk Reduction. http://doi.org/10.1016/j.ijdrr

Of Mysid and Menidia: Sublethal Effects of Micro and Nanoplastics on Estuarine Indicator Species

Creator:: Dickens, John
Abstract:: Microplastics are widely distributed in aquatic environments. The term ‘microplastics’ encompasses a wide array of particles with unique polymer constituents, morphologies, and sources, such as automobile tire tread. Tire wear particles (TWP) can end up in waterways near densely populated municipalities, where they can interact with aquatic biota. Studying the...
Resource Type:: Masters Thesis

Tropical Fruit Aroma in Chardonnay: Impact of Fermentation Techniques on Volatile Ester and Thiol Concentrations, Tropical Fruit Aroma Perception, Preference, and Emotional Response

Creator:: Lucas, Chase J.
Abstract:: Tropical fruit aromas are prominent in wines like Sauvignon Blanc, one of the most abundant white wines in the United States. With high consumer interest for these aromas, it has become increasingly important to understand the factors that influence the desired tropical fruit aromas in white wines. Understanding the causes...
Resource Type:: Masters Thesis
Full Text:: . Food Quality and Preference 32:210–220. https://doi.org/10.1016/j.foodqual.2013.10.006 Ares G

Characterization of CoGe Thin Films and Powders

Creator:: Pfau, Andrew James
Abstract:: Cobalt germanides have been widely studied as semiconductor contact materials, but recent theoretical studies suggest that they may also be excellent catalysts for methane steam reforming with stabilities and activities comparable to noble metal catalysts. In order to study the catalytic activity of cobalt germanides, it is critical to first...
Resource Type:: Masters Thesis
Full Text:: Reforming. Adv. Catal. 47 (2002) 65‐139. doi:10.1016/S0360‐0564(02)47006‐X

Microbial Electrolysis Cells for the Production of Hydrogen Gas : Evaluation of Internal Resistance and Design for Scale-Up

Creator:: Miller, Andrew G.
Abstract:: Modification of microbial electrolysis cells (MECs) by altering the sizes of the anode and the cathode, or their interaction with the liquid stream affects the performance of the MEC, but it remains difficult to quantify how much each change will contribute to the overall performance. Through this study, a method...
Resource Type:: Masters Thesis

Investigation of Eco-friendly, Bio-based Methods to Produce High Quality and Water-resistant Apple Pomace Biocomposites Using Molded Pulp Technology

Creator:: Lang, Clara V.
Abstract:: The overall goal of this study was to utilize apple pomace, the byproduct from juice processing, as a renewable source of fiber to create sustainable packaging using molded pulp technology. The goal was accomplished through two studies: 1) to modify apple pomace fibers for increasing relative cellulose composition and improving...
Resource Type:: Masters Thesis
Full Text:: . Renewable and Sustainable Energy Reviews, 27, 789–805. https://doi.org/10.1016/j.rser.2013.06.046 Didone

ScholarsArchive@OSU

Evaluation of Setback Crosswalk to Mitigate Vehicle-Pedestrian Conflicts at Intersections

The Processing and Microstructures of 309L Stainless Steel Clad onto Carbon Steel with Wire-fed Directed Energy Deposition

Simulating Soot Formation and Growth using a Parallel Coupled Monte Carlo Method

Evaluation of Stress Corrosion Cracking of 316L Stainless Steel in FLiNaK Using the Slow Strain Rate Technique

Leveraging multi-sensor time series datasets to map short- and long-term forest disturbances and drivers of change in the Colombian Andes

Of Mysid and Menidia: Sublethal Effects of Micro and Nanoplastics on Estuarine Indicator Species

Tropical Fruit Aroma in Chardonnay: Impact of Fermentation Techniques on Volatile Ester and Thiol Concentrations, Tropical Fruit Aroma Perception, Preference, and Emotional Response

Characterization of CoGe Thin Films and Powders

Microbial Electrolysis Cells for the Production of Hydrogen Gas : Evaluation of Internal Resistance and Design for Scale-Up

Investigation of Eco-friendly, Bio-based Methods to Produce High Quality and Water-resistant Apple Pomace Biocomposites Using Molded Pulp Technology

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Conference Section/Track

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Funding Body

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search