The principal objective of this study was to investigate process simulation and
optimization of an existing offshore natural gas process which needed profitability
improvements. Optimization was done using two alternative approaches: a global
approach (response surface methodology) or a local approach (successive quadratic
programming). The global approach was characterized by...
A column which contains a series of three fluidized
beds for counter-current contacting of solid particles with
a gas stream has been studied. Successful, independent
control of solids holdup on each stage has been achieved by
manipulating the field of a magnetic distributor-downcomer
on each stage. Two methods to manipulate...
This thesis examines the transient response of a packed bed heat
regenerator when heated from an initial uniform bed temperature. Very large
(1700 K) temperature differences were studied as well as the effect of
simultaneous chemical reaction in the gas phase.
First the effects of temperature on physical and transport...
Two packages of subroutines were developed to perform material
balances on chemical processes using the simultaneous modular
approach and the equation-based approach. The performances of these
packages were compared for five different processes under at least
two conditions: one with no design specifications, and one with two
or more design...
A digital phase locked loop (DPLL) and a statistical time-to-digital converter (STDC) were previously fabricated in a 0.35µm, 3.3V SOI CMOS process. This work summarizes these designs and characterizes the measured performance. Simulations supplement the measurements where applicable.
The DPLL was found to reach a locked state under a limited...
Pediococcus cerevisiae, Lactobacillus casei, Lactobacillus plantarum,
Leuconostoc mesenteroides, Lactococcus diacetylactis Bifidobacterium
bifidum, Leuconostoc oenos, and mixed cultures of Propionibacterium
shermanii and P. cerevisiae were used to ferment cucumber juice brine
(CJB) at 22-26°C for 1.5 months. Sugar utilization ranged from 14.6 to 86.1%.
pH of the fermented CJB ranged from...
The principal aim of this study was the use and evaluation of dynamic
modeling techniques to identify mathematical models for cereal drying rates and
quality changes that best describe thin-layer malt drying data. Seven thin-layer
malt drying experiments were performed at the Great Western Malting pilot
facilities, Vancouver, WA. Malt...
Ferrites have been used for various high frequency applications as bulk
materials. These applications, however, are limited to large dimension devices. In
this thesis, thin film ferrites were deposited from a low temperature solution-based
deposition process that is suitable for micro-scale high frequency applications. The
low temperature nature of this...
The design of two 2.4GHz CMOS LC balanced oscillators in the 0.25μm National BiCMOS process for Bluetooth specifications is presented. These oscillators achieve low phase noise with low power consumption. At a frequency offset of 500KHz from the 2.11GHz carrier, the measured phase noise is -101.9dBc/Hz for the NMOS oscillator...