The focus of this thesis involves developing general fabrication processes relevant to the manufacture of two new devices for the Microscale technology Energy and Chemical Systems (MECS) program at Oregon State University. The two MECS devices developed, capture dots and transparent thin-film heaters (TTFHs), require unique process development for successful...
The Brushless Doubly-Fed Machine (BDFM) has recently become an
important research topic in the field of variable-speed AC drives. In
recent studies, the BDFM has shown significant potential for improving the
reliability and performance of AC drive systems, as well as reducing total
system cost. While the BDFM offers several...
The alternators in today's automobiles are of the claw-pole or Lundell
construction, which is a readily manufactured, low-cost derivative of the conventional
rotating dc field synchronous generator. The efficiency of the Lundell system is low due
to a complicated magnetic circuit of predominantly solid steel and a high windage rotor...
An AC/AC converter has been designed and implemented for the purpose of
providing a modular drive system with a Brushless Doubly-Fed Machine (BDFM.) This
converter is to be used in laboratory testing and also as part of a demonstration system in
the field.
All hardware needed to start and run...
A relatively new development in the electric machines field has been the written-pole technology, of which the latest product is the large single-phase electric motor, the single phase Written-Pole Motor (WPM). The WPM is a synchronous, permanent-magnet single-phase motor having a weak rotor cage for start-up which in addition exhibits...
Environmental concerns have renewed the interest in electric vehicles. To gain
widespread use, electric vehicles will also have to offer good performance and be
reasonably priced. AC drive systems using modern semiconductors can provide
efficient operation at the required power levels, but their cost at present is still too
high....
Brushless Doubly-Fed Machines have potential benefits in variable speed generation and adjustable speed drive applications by combining a robust machine structure with a reduced power converter rating. While recent work has demonstrated feasibility, steady-state performance has not been optimized. The nature of doubly-fed operation causes rotor currents of varying, relatively...
The Brush less Doubly-Fed Machine (BDFM) has the potential to be a more cost effective replacement for conventional induction or synchronous machine drives. The BDFM has two stator windings: a power winding and a control winding. An electronic power converter of variable voltage and frequency is connected to the control...
Wave energy conversion devices are a rapidly growing interest worldwide for the potential to harness a sustainable and renewable energy source. Due to the oscillatory nature of ocean waves, the power generated from a permanent magnet linear generator (PMLG) for ocean wave energy conversion is pulsed. Focusing on direct drive...
Traditionally linear actuator applications are addressed by the use of hydraulic systems. The high maintenance cost and poor reliability will always be the most critical problem in the real applications. Benefited from both the high mechanical advantage of the roll screw and the simple structure of the switched reluctance motor,...