The loads on the electrical systems of automobiles are projected
to increase significantly in the near future. This will result in a
requirement for improved efficiency over the present-day car
alternators. An alternative scheme proposed at Oregon State
University employs a Brushless Doubly-Fed Machine (BDFM) as an
alternator.
This thesis...
Driven by the need for high energy-density power sources, demand has
stimulated the development of small-scale engines. A small-scale engine
with a fuel supply could replace batteries and utilize higher energy-density
liquid hydrocarbon fuels; such an advance could deliver a new age of
portable devices. Currently, operable small-scale engines exist;...
The designing of electrical machinery is fully
as essential to the thorough understanding of power
equipment and apparatus, as is the taking of a laboratory
testing course. One learns the relationship
of the different parts, the methods of computing
their dimensions, and the predetermination of outputs,
efficiencies, etc. and thus...
A variable gain, high linearity, low power baseband filter for WLAN applications is implemented in a 1.5 V 3 V 0.15 μm CMOS process. This fourth-order low-pass filter, which is introduced in the transmit channel as a reconstruction filter between the D/A converter and the mixer, has a measured cut-off...
The design and implementation of Switched-Current (SI) ladder filters is
described. SI filters require only a standard digital CMOS process and the power
supply voltage requirement is low. SI circuits also can be potentially operated at
higher frequencies than Switched-Capacitor (SC) filters due to the low-impedance
wideband nodes of the...
The design of two 2.4GHz CMOS LC balanced oscillators in the 0.25μm National BiCMOS process for Bluetooth specifications is presented. These oscillators achieve low phase noise with low power consumption. At a frequency offset of 500KHz from the 2.11GHz carrier, the measured phase noise is -101.9dBc/Hz for the NMOS oscillator...
A design style is presented for a self-synchronized,
multiple input change, asynchronous state machine which
processes input changes at a speed limited only by the
required machine behavior and implementation technology.
This state machine will operate at this ultimate speed
because of a new asynchronous delay element with unequal
rising...
The alternators in today's automobiles are of the claw-pole or Lundell
construction, which is a readily manufactured, low-cost derivative of the conventional
rotating dc field synchronous generator. The efficiency of the Lundell system is low due
to a complicated magnetic circuit of predominantly solid steel and a high windage rotor...