An analysis that accounts for the effect of standard electrostatic discharge (ESD) structures on critical LNA specifications of noise figure, input matching and gain is presented. It is shown that the ESD structures degrade LNA performance particularly for higher frequency applications. Two LNAs, one with ESD protection and one without,...
High performance multi-cell delta-sigma modulators are a preferred choice in applications which require programmability. Multi-cell delta-sigma modulators with M unit cells provide 10log10(M) SQNR improvement for the same thermal noise and bias power due to the uncorrelated quantization noises of the M unit ADCs. This concept is used in this...
Full integration of CMOS low noise amplifiers (LNA) presents a challenge for low
cost CMOS receiver systems. A critical problem faced in the design of an RF CMOS LNA
is the inaccurate high-frequency noise model of the MOSFET implemented in circuit
simulators such as SPICE. Silicon-based monolithic inductors are another...
Previous work at Stanford University has demonstrated that inductance in the
substrate connection is the principal problem underlying the coupling of digital
switching noise into analog circuits. The low impedance substrate can be treated
as a single node over a local area. Switching in the digital circuits produces
current transients...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
There is a large and growing market for portable consumer audio products
with very small size. As the size of these products is reduced, the area occupied
by batteries becomes significant and hence limits the number of batteries to one.
In order to build such small products, high levels of...
The purpose of this thesis is to apply the Canonical Correlation
Analysis (CCA) which belongs to the parametric methods for power
spectral estimation in the environments of either white noise or
colored noise. It is shown that optimal state space variables
belong to the range space of the canonical vectors...
The tremendous growth of wireless and mobile communications has resulted in placing of stringent requirements on the channel spacing and, by implication, on the phase noise of oscillators, typically mandating the use of passive LC oscillators with high quality factor (Q). However the trend towards large-scale integration and low cost...
This thesis presents a systematic top-down methodology for simulating a phase-locked loop using a macro model in Verilog-A. The macromodel has been used to evaluate the jitter due to supply noise, thermal noise, and ground bounce. The noise simulation with the behavioral model is roughly 310 times faster (best case)...
Low noise oscillators are universally needed in digital systems for clock generation and synchronization, and in radio-frequency communication front-ends for frequency up- and down-conversion. Noise in oscillators results in timing jitter, and limits the clock frequency of digital systems. In radio-frequency communication systems, phase noise in oscillators lowers the signal-to-noise...