The focus of this thesis involves developing general fabrication processes relevant to the manufacture of two new devices for the Microscale technology Energy and Chemical Systems (MECS) program at Oregon State University. The two MECS devices developed, capture dots and transparent thin-film heaters (TTFHs), require unique process development for successful...
Brushless Doubly-Fed Machines have potential benefits in variable speed generation and adjustable speed drive applications by combining a robust machine structure with a reduced power converter rating. While recent work has demonstrated feasibility, steady-state performance has not been optimized. The nature of doubly-fed operation causes rotor currents of varying, relatively...
The Brush less Doubly-Fed Machine (BDFM) has the potential to be a more cost effective replacement for conventional induction or synchronous machine drives. The BDFM has two stator windings: a power winding and a control winding. An electronic power converter of variable voltage and frequency is connected to the control...
An AC/AC converter has been designed and implemented for the purpose of
providing a modular drive system with a Brushless Doubly-Fed Machine (BDFM.) This
converter is to be used in laboratory testing and also as part of a demonstration system in
the field.
All hardware needed to start and run...
The objective of this thesis is to design a high speed digital FIR filter. The inputs of the
system come from a Delta-Sigma modulator. This FIR filter takes 1024 inputs,
multiplies them with their coefficients and adds the results. The main design task is to
take the input data, which...
Hybrid electric vehicles (HEV’s) are a very important part of today’s transportation system as they are bridging the gap between fully electric vehicles and conventional internal combustion vehicles (ICV’s). They have much higher efficiencies and lower emissions than ICV’s, while still having the ability to travel long range and refuel...
As more advanced hybrid electric vehicles begin emerging onto the commercial market, design algorithms for their control become increasingly more complicated. One major hurdle for designers is the mitigation and control of the created high frequency harmonics caused from switching the dc voltage into an ac voltage by use of...
Spiral inductors are a key component of mixed-signal and analog integrated circuits (IC's). Such circuits are often fabricated using silicon-based technology, owing to the inherent low-cost and high volume production aspects. However, semiconducting substrate materials such as silicon can have adverse effects on spiral inductor performance due to the lossy...
The purpose of this thesis is to represent and calculate unsymmetrical
secondary faults on a grounded wye-to-delta transformer
bank.
This thesis is specifically concerned with the secondary connections
often encountered in industrial installations. Faults on these
systems have not been adequately investigated.
Three types of faults are considered, namely:
1....
A significantly untapped renewable energy source exists in the world's oceans. It is estimated that if 0.2% of the ocean's untapped energy could be harnessed, it could provide power sufficient for the entire world. Ocean energy extraction is an old concept, and it is currently seeing the benefit of advancing...