Deformation of metallic glasses requires the existence of free volume to allow atomic movement under mechanical loading. Accordingly, the present research seeks to understand how free volume variations in alloys of identical compositions affect the fatigue and fracture behavior. By annealing below the glass transition temperature, the free volume of...
The influence of shear rate and temperature on the viscosity and fragility of the Zr₄₁.₂Ti₁₃.₈Cu₁₂.₅Ni₁₀.₀Be₂₂.₅ (Vit1) metallic glass forming liquid is measured in the liquid and undercooled liquid state between 907 and 1300 K. The results show a complex rheological behavior of Vit1. The viscosity of Vit1 is about three...
The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
This report presents progress accomplished during the 20-month period from 1 July 1972 through 31 March 1974 as part of the program "Ecological Studies of Radioactivity in the Columbia River Estuary and Adjacent Pacific Ocean". This program is a continuing study supported by the Division of Biomedical and Environmental Research...
Micro Powder injection molding (μPIM) is a cost-effective technique for
producing small, complex, precision parts in high volumes from ceramic and
metal nanoparticles. This study focuses on research conducted on fabrication of
Micro Ceramic Arrays (MCAs) parts using μPIM. MCAs are widely used as the
major components and design features...
Nitrosomonas europaea carries out the first step in the biological nitrogen removal process in wastewater treatment by oxidizing ammonia to nitrite. It has been shown to be sensitive to a wide range of contaminants. The antibiotic oxytetracycline and the heavy metals chromium and silver have been found in wastewater influent....
The effect of ambient environment on the fatigue behavior of two Zr-Ti-Cu-Ni-Be bulk metallic glasses (BMGs) is examined in the present study. The first metallic glass, Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅, was tested to establish the presence of an environmental effect in the fatigue growth curve measured in ambient air. Fatigue growth curves produced...
Depth-profiled Doppler broadening spectroscopy of positron annihilation on the cyclic fatigue-induced fracture surfaces of three amorphous Zr₄₄Ti₁₁Ni₁₀Cu₁₀Be₂₅ metallic glass specimens reveals the presence of a 30–50 nm layer of increased free volume that is generated by the propagating fatigue crack tip. The presence and character of this fatigue transformation zone...
Currently, the temporal arc distribution across the ingot during the vacuum arc remelting (VAR) process is not a known or monitored parameter. It is has previously been shown that arcs can spatially constrict during VAR, and this constriction can lead to undesired defects in the material. Additionally, correct accounting for...
Elasticity properties of wood studs are essential inputs for
the structural analysis of wood-stud wall systems.
A theoretical procedure was developed to determine the probability
distributions for the deflection-load relations of stud samples.
The procedure is based on the finite element analysis and a Monte-
Carlo type simulation and accounts...
This paper covers the impact of Franklin D Roosevelt's, "Indian New Deal"
and the effect it had on federally recognized Indian tribes. I have taken an
in-depth look at specific areas of New Deal legislation including the Indian
Reorganization Act, the Johnson O'Malley Act, and the Indian Arts and
Crafts...
The thermophilic cyanobacterium Thermosynechococcus elongatus was examined for the ability to sequester CO₂ while producing hydrogen (H₂), polyhydroxybutyrate (PHB), lipids, and glycogen. H₂ was produced at a maximum rate of 188 nmol H₂ mg Chl a⁻¹ hr⁻¹. Hydrogen production occurred in the presence of methyl viologen but the cells were...
The next generation of high temperature structural alloys must exhibit exceptional resistance to fracture, creep, oxidation, and fatigue at high temperatures. Chromium is being considered due to its high melting point (>1800°C), relatively low density (~7.2 g/cc), high temperature strength, and oxidation resistance. Limiting the use of chromium is its...
Covers the period from December 1, 1890 to November 30, 1892. Concerned with fisheries legislation and enforcement, financial reporting, hatcheries and fisheries statistics. 4th report (1891) found in p.1-28. The fifth report (1892) (p.29-46) includes sections on fish and game laws of Oregon. A paper copy of this report may...
Photobiological hydrogen production from live cells of the cyanobacterium Synechocystis sp. PCC 6803 encapsulated in silica gel was investigated. Hydrogen is a dense energy carrier with potential to reduce dependence on fossil fuels, provided a renewable and sustainable means of production can be achieved. Under certain conditions, Synechocystis sp. PCC...
The purpose of this study is to synthesize and characterize the nanoporous structures that can be obtained by the anodization of thin film aluminum sputter deposited on a silicon wafer substrate. This study also investigated the application of nanoporous alumina to fabricate nanorod arrays by using preceramic polymers. Although there...