This work explores the mechanical properties of single-phase niobium alloy C103 from room temperature to 600°C for the purpose of expanding safe uses of the material into new applications. The study utilizes a symmetrically notched triaxial tensile specimens to manipulate the internal stress field in order to observe the changes...
Nickel (Ni)-based alloys with a high chromium (Cr) content are frequently employed in applications where elevated temperatures and/or corrosive environments are present due to their excellent corrosion resistance and mechanical properties. However, a gap exists around the formation, and kinetics of long-range order (LRO) Ni2Cr phase in both model binary...
This work explores the hypothesis that proton irradiation is a feasible alternative to simulate accelerated thermal aging for Ni2Cr long-range ordered phase formation within NiCr and NiCrFe alloys. In this study, various model alloys and commercial alloys 690 and 690+P (0.01 wt.% P) were subject to 2 MeV proton irradiation...
Directed energy deposition and laser cladding technologies are suitable advanced manufacturing techniques for applying corrosion-resistant claddings to large carbon steel components. In this work, we clad 309L stainless steel wire onto carbon steel substrates and examine the effects of cladding parameters (laser power and travel speed) on metallurgical bonding, composition,...
The corrosion resistance of steels and nickel based alloys was investigated in supercritical CO2 (sCO2). Two types of experiments were conducted. The first set of experiments were conducted in a low temperature aqueous environment to simulate conditions that would exist in direct sCO2 power cycle low temperature heat exchangers. The...
The advent of supercritical CO2 as a new heat-exchange medium has seen strong interest from the power industry and the energy research field recently. It is advan- tageous in comparison with other heat-exchange cycles, as it can be operated safely at much higher temperatures and pressures, thus increasing the thermal...
High purity niobium metal is used in the construction of superconducting radio frequency (SRF) cavities in superconducting particle accelerators, such as the Large Hadron Collider (LHC) at CERN or the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The usual method for characterizing the impurities in this niobium, the...
Duplex stainless steels (DSS) are an attractive potential material in nuclear power generation systems due to an excellent combination of corrosion resistance, strength, toughness, and affordability. Thermal embrittlement caused by phase instability in the temperature range of ~300-550°C severely limits the service temperature of DSS. The rate of embrittlement varies...
Variations in heat treatments have significant effects on the microstructure of tool steels. For CPM-M4 tool steel, the changes in microstructure and mechanical properties were observed based off of variations in temperature. Five heat treatments with constant exposure time and variable austenitizing and tempering temperatures were performed on samples of...
The monolithic (plate type) Uranium 10 wt.\% Molybdenum (U-10Mo) fuel system is promising for a variety of applications, most notably for the replacement of highly enriched uranium (HEU) fuels with low enriched uranium (LEU) fuel in United State High Performance Research Reactors (U.S. HPRRs).
Phase transformations and secondary phase formation...