The Comprehensive Nuclear-Test-Ban Treaty (CTBT) bans all nuclear explosion tests for military or civilian purposes. The International Monitoring System (IMS) was established to verify compliance with the treaty. It consists of several monitoring stations that detect: seismic activities, hydrocoustic activities, infrasound waves, and radionuclide particles and noble gases. Radioxenon detection...
Triangulateration uses geometric distance to estimate the location of user by employing techniques like received signal strength (RSS), time-of-arrival (TOA), time-difference-of-arrival (TDOA) and image processing.
Radio frequency (RF) signal positioning using TOA or TDOA techniques generally requires timing synchronization of the anchors and/or the anchors and targets. If the desired...
Recent sensor System-on-Chips (SoC) have enabled significant advances in energy-efficiency by incorporating various micro-powered building blocks. Unfortunately, most of these sensor systems do not address the high power cost associated with data storage and transmission, which in some cases vastly exceeds the power consumed by the rest of the SoC....
This dissertation focuses on the development of ultra-compact optical devices for free-space modulation. We propose a surface-normal modulator using metallic photonic crystals for free-space optical interconnects. The active control of light intensity is achieved by engineering the Fano resonances in metallic photonic crystals. Both thermo-optic modulation and electro-optic modulation of...
In wireless communication, channel state information (CSI) is essential for data detection. Fast fading coefficients estimation is important in order to acquire accurate CSI. Kalman filters (KF) are widely used for real time parameter estimation and can be used to estimate the fast fading coefficients of a mobile communication channel....
Massive MIMO is a promising technique for future 5G communications due to its high spectrum and energy efficiency. To realize its potential performance gain, accurate channel state information at transmitter side (CSIT) is essential. Frequency division duplex (FDD) is widely employed by the most cellular systems today. However, it requires...
Detection of xenon radioisotopes (radioxenons) has proven to be an important method for detecting nuclear explosions and is particularly well suited for detecting undeclared underground testing. The radioxenon isotopes ¹³¹mXe (t₁/₂ = 11.934 d), ¹³³mXe (t₁/₂ = 2.19 d), ¹³³Xe (t₁/₂ = 5.243 d) and ¹³⁵Xe (t₁/₂ = 9.14 h)...
The design of mobile wireless devices has always focused on reducing power, area, and cost. This dissertation proposes two techniques that are leveraged to save power and area and therefore cost. The first techniques reduces the noise in the receiver and results in a relaxed power requirement. The second technique...
All-digital PLLs promise flexible and precise frequency modulation continous-wave(FMCW) radar signal signal for 77GHz radar applications. Such PLLs require digitally-controlled oscillators(DCO) with wide frequency tuning range and high resolution to address a range of applications and low phase noise requirements. In this thesis, novel resonator structures with ne capacitance/inductance switching...
The ability to accurately locate people and objects indoors will enable opportunities for control and automation of indoor environments. Current indoor localization solutions require dedicated hardware which must be custom tailored to each application. There are large technological, societal, and economic benefits in developing a more general purpose system that...
The complexity of designing and testing today's system on chip (SOC) is increasing due to greater integrated circuit (IC) density and higher IO and memory frequencies. SOCs for the mobile phone and tablet market have the unique challenge of short product development windows, at times less than six months, and...
Wireless High Definition Video Transmission (WHDVT) over 802.11-based networks enjoys widespread deployment among today's multimedia solutions. Examples include Intel® Wireless Display and Apple Airplay®, to name a few. In these systems, peer-to-peer networks are established over which H.264-encoded video is transported wirelessly to be decoded and played back at the...
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
A procedure for automating the design and layout of analog-to-digital converters (ADCs) is presented. This procedure makes use of the existing synthesis and place-and-route tools that are common in digital circuit design. A method for adding rudimentary analog cells to the standard library is described, allowing the designer to synthesize...
Recent publications show that successive approximation register (SAR) analog to digital converters (ADC) are capable of achieving high efficiency over other ADC topologies. Furthermore, techniques have been adopted to process signals with low activity periods, such as biomedical and industrial sensors. Prior work used least- significant bit first quantization (LSBFQ)...
Routing from a single source node to multiple destination nodes using node disjoint paths (NDP) has many important applications in parallel systems. For example, if a source node wants to send distinct messages to distinct destination nodes, then the one-to-many NDP routing is useful.
Unlike parallel systems with shared-memory, each...
The Focused Ion Beam (FIB) tool is a versatile instrument for nano-machining in
circuit editing. Circuit editing is one of the most important steps in the design of an
electronic circuit on a chip. Circuit editing can be improved by imaging of silicon
plates and analyzing the resultant images. However...
Radioxenon detection is a technique used to monitor nuclear explosion and verify the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Because of an ultra-low concentration of radioxenon at radioxenon monitoring stations, radioxenon detection systems must have high sensitivity. This sensitivity is measured in terms of detector's minimum detectable concentration (MDC). It is required...
For the past half century, CMOS process scaling has followed Moore's law, approximately doubling transistor density every 18 months. While locally routed wires have generally scaled with transistor size, longer wires have scaled at a slower rate and in some cases have grown larger as chip size and complexity have...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...