An analysis of substrate noise coupling in mixed-signal circuits has been performed in the TSMC 0.25 [mu]m lightly doped and heavily doped CMOS processes. Methods to minimize noise coupling in both the chip design and board design phases are presented along with techniques for accurate circuit simulation of noise coupling....
Three types of low noise amplifiers operating at 2.4GHz were designed. They are the commonly used single-ended and differential amplifiers as well as a new quasi-differential amplifier. The substrate noise injected into these amplifiers is examined for both heavily and lightly doped CMOS substrates. For the single-ended amplifier the noise...
A methodology for rapid estimation of substrate noise generated by digital circuitry in mixed-signal circuits is presented. This methodology is incorporated into the Silencer! framework, and also provides for future improvements including pre-layout noise estimation. Measurements of a test chip fabricated in the TSMC o.25[mu]m heavily doped logic process validate...
A fully integrated CMOS latched comparator is presented for use as a wake-up circuit that is attached to an RF energy harvester in a battery free wireless sensor network. The system consumes less than 36nA static current at 20°C and dissipates 2pJ of energy per conversion. The comparator comprises of...
Digital phase-locked loops (PLLs) have been receiving increasing attention recently due to their ease of integration, scalability and performance comparable to their analog counterparts. In digital PLLs, increased resolution in time-to-digital conversion is desirable for improved noise performance. This work describes the design and simulation of a stochastic time-to-digital converter...
This thesis presents a design-oriented model for lightly doped CMOS substrates. The model predicts the substrate noise coupling between noisy digital and sensitive analog blocks in the early stages of the design. The model scales with the size and separation of these blocks and it is validated with device simulations...
At frequencies exceeding 1-2 GHz, the substrate network models used in substrate coupling simulation must account for the reactive nature of the substrate. Unlike at low frequencies, where the purely resistive substrate models can be validated through DC resistance measurements, these high-frequency models, comprising reactive components, must be validated through...
A new method is presented to compress switching information in large digital circuits. This is combined with an efficient approach of generating the noise signatures of cells in a digital library that results in an accurate and efficient approach for estimating the noise generated in digital circuits. This method provides...
Algorithms and simulators comprised of SPICE3 as a circuit level simulator and two device simulators EOFLOW and PROPHET for accurate simulation of new types of devices are presented in this thesis. An integration of EOFLOW with SPICE3 creates a capability for efficient simulation of a system containing interconnected electroosmotic flow...
This thesis presents algorithms and tools for the automated design of RF LC CMOS voltage controlled oscillators (VCOs) with low phase noise given a set of specifications. The electromagnetic solver, ASITIC, combined with the circuit simulator, SpectreRF, allows optimization of the VCO circuit parameters and inductor layout. This approach gives...
This thesis presents a Z-parameter based model to predict the substratenoise coupling between two contacts in a heavily doped substrate for frequenciesless than 2 GHz. The empirical model is scalable with contact size and spacingsbetween the contacts and model parameters can be readily extracted from simu-lated or measured data. The...
An enhanced swing differential Colpitts VCO (ESDC-VCO) dramatically improves
the swing of a Colpitts VCO by allowing the signal to swing below ground and above the
supply voltage. Fabricated in a 1P8M 0.13 um CMOS process, the ESDC-VCO operates
at 4.9GHz with a 0.475-V supply and consumes 2.7mW. The measured...
An ultra low power crystal oscillator that provides a frequency reference for battery
powered timekeeping applications is presented. An amplitude control circuit is employed to ensure that minimum current is consumed. A subthreshold voltage regulator provides a supply voltage for the oscillator with minimum current consumption. The oscillator and regulator...
A fully integrated CMOS GPS receiver RF front end optimized for low power operation is presented. The system operates with a supply voltage down to 250 mV. A prototype has been fabricated in a 0.13μm CMOS process and includes a low voltage LNA, quadrature oscillators, and quadrature mixers. It exhibits...
An analysis that accounts for the effect of standard electrostatic discharge (ESD) structures on critical LNA specifications of noise figure, input matching and gain is presented. It is shown that the ESD structures degrade LNA performance particularly for higher frequency applications. Two LNAs, one with ESD protection and one without,...
This thesis examines substrate noise coupling for NMOS transistors in heavily doped substrates. The study begins with the analysis of an NMOS transistor switching noise in a digital inverter at the device level. A resistive substrate network for the NMOS transistor is proposed and verified. Coupling between N+- P+ contacts...
Low noise oscillators are universally needed in digital systems for clock generation and synchronization, and in radio-frequency communication front-ends for frequency up- and down-conversion. Noise in oscillators results in timing jitter, and limits the clock frequency of digital systems. In radio-frequency communication systems, phase noise in oscillators lowers the signal-to-noise...
Delay insensitive asynchronous circuitry provides significant advantages with
respect to substrate noise due to localized switching. The differences between the
substrate noise from NULL Convention Logic (NCL) and traditional Clocked
Boolean Logic (CBL) are described and analyzed based on measured results. A test chip fabricated in the TSMC 0.25 um...
This thesis presents a comparison of time-domain and frequency-domain algorithms for phase noise calculation in oscillators. Floquet theory provides the mathematical foundation for these calculations and the numerical methods employ perturbation projection vectors (PPVs). The PPVs are an estimate of an oscillator's sensitivity to noise.
The in-house circuit simulator SPICE3...
A Z-parameter based macromodel for characterizing the substrate noise coupling in a lightly doped substrate at low frequencies has been developed. The model is scalable with contact geometries and separation. The cross-coupling impedance between two contacts is modeled using an improved geometric mean distance formulation. This approach obviates the need...