Part I: Plasmonic color filters can be manufactured at lower cost since they can be fabricated in single lithographic process step as compared to Fabry-Perot based filters. In addition, they have narrow passband making resolving sharp features in sample spectrum possible. Due to these benefits, in this thesis, Plasmonic color...
With the growing demand for portable/consumer electronics, such as digital
audio/video (AV), the downscaling of device dimensions, which enables the
integration of an increasing number of transistors in a single chip, is mandatory.
This trend also continuously pushes the power supply voltage down to reduce the
power consumption and improve...
Digital-to-analog converters (DACs) with wide dynamic range and high
linearity are required for high-end audio applications. A multi-bit delta sigma
audio DAC, using a novel gain-correction technique, is described in this thesis. For
widely varying on-chip RC time constant, the DAC gain can be accurately
controlled by the correction circuitry....
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
This thesis describes design techniques for high-performance switched-capacitor
(SC) circuits, primarily for high-linearity low-noise SC circuits in the presence of
component imperfections, such as nonlinear op-amp voltage transfer characteristics,
capacitor nonlinearities as well as the finite op-amp dc gain and op-amp offset and noise.
Various correlated-double-sampling (CDS) schemes are discussed,...
Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However,...
Enabled by continued device scaling in CMOS technology, more and more functions that were previously realized in separate chips are getting integrated on a single chip nowadays. Integration on silicon has opened the door to new portable wireless applications, and initiated a widespread use of these devices in our common...