Search Constraints

Start Over
Filtering by: Alternative title ssim FS 250 Remove constraint Alternative title ssim: FS 250 Committee Member Liu, Huaping Remove constraint Committee Member: Liu, Huaping Resource Type Dissertation Remove constraint Resource Type: Dissertation

Search Results

  • Power Efficient Architectures for Medium-high Resolution Analog-to-Digital Converters

    Creator:
    Sadollahi, Mahmoud
    Abstract:
    Analog-to-digital converters are essential components to the portable devices that we are using today. Wireless sensors, body implanted devices, communication devices and so forth require low power ADCs. Therefore achieving higher resolution and bandwidth with lower power consumption is targeted in ADCs design. In this work power efficient ADCs for...
    Resource Type:
    Dissertation
    Full Text:
    total power consumption was 250 nW from a 0.75V supply voltage. This gives a Walden FoM of 28.8 fJ

  • Design and analysis techniques for nano-joule ADCs and sampling linearity

    Creator:
    Brown, Thomas (Thomas William)
    Abstract:
    Two aspects of ADC system performance are addressed in this work. First, the combination of the ADC and its associated reference are co-designed for an energy constrained remote sensing system. Second, sampling linearity is mathematically analyzed as a function of frequency to provide enhanced understanding into an ADC's requisite sampling...
    Resource Type:
    Dissertation
    Full Text:
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 3.14 Measured fundamental, HD2, HD3, HD4, and HD5 versus input frequency at Fs = 19MSPS

  • Time and statistical information utilization in high efficiency sub-micron CMOS successive approximation analog to digital converters

    Creator:
    Guerber, Jon
    Abstract:
    In an industrial and consumer electronic marketplace that is increasingly demanding greater real-world interactivity in portable and distributed devices, analog to digital converter efficiency and performance is being carefully examined. The successive approximation (SAR) analog to digital converter (ADC) architecture has become popular for its high efficiency at mid-speed and...
    Resource Type:
    Dissertation

  • High efficiency delta-sigma modulation data converters

    Creator:
    Lee, Kyehyung
    Abstract:
    Enabled by continued device scaling in CMOS technology, more and more functions that were previously realized in separate chips are getting integrated on a single chip nowadays. Integration on silicon has opened the door to new portable wireless applications, and initiated a widespread use of these devices in our common...
    Resource Type:
    Dissertation
    Full Text:
    drivers for the headphones. The digital filter increases the sampling rate from fs = 48 kHz to 64·fs

  • Design techniques for low-power multi-GS/s analog-to-digital converters

    Creator:
    Jiang, Tao
    Abstract:
    Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
    Resource Type:
    Dissertation
    Full Text:
    each bit comparison, and then reset the comparator. Typically, if the sampling rate of the ADC is FS

  • Kinematic and cyclostationary parameter estimation for co-channel emitter location applications

    Creator:
    Ohm, David R.
    Abstract:
    The problem of locating a signal source, or an emitter, has many civilian and military applications, such as communication regulations enforcement, military reconnaissance, and search-and-rescue operations. Many of the most widely used emitter location methods rely on the accurate and robust estimation of the differential time delay, or time-difference-of-arrival (TDOA),...
    Resource Type:
    Dissertation
    Full Text:
    . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.8 GCC vs. time for BPSK SOI showing time-varying TDOA estimates. SOI used a 250 kHz center

  • Adaptive, wideband analog-to-digital conversion for convergent communication systems

    Creator:
    Batten, Robert D., 1973-
    Abstract:
    The exponential rate of advances in modern communication devices in the last several years have brought us higher levels of functionality and performance as well as reductions in physical size and power consumption. To continue this rate of advancement, next generation systems require wider bandwidth and higher resolution ADCs. Additionally,...
    Resource Type:
    Dissertation
    Full Text:
    excessive loading and input switching transients. fs Vin + ­ Av Vout Cs Figure 2.2: Open-loop track

  • Linearity enhancement techniques for data converters

    Creator:
    Cao, Jinzhou
    Abstract:
    Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
    Resource Type:
    Dissertation
    Full Text:
    oversampling ratio (OSR) as the actual sampling frequency (fs) over two times the signal bandwidth (fB), or

  • Low-voltage data converters

    Creator:
    Meng, Qingdong
    Abstract:
    With the growing demand for portable/consumer electronics, such as digital audio/video (AV), the downscaling of device dimensions, which enables the integration of an increasing number of transistors in a single chip, is mandatory. This trend also continuously pushes the power supply voltage down to reduce the power consumption and improve...
    Resource Type:
    Dissertation

  • Energy-efficient, short-range ultra-wideband radio transceivers

    Creator:
    Hu, Changhui
    Abstract:
    Short-range wireless communications continually attract interest from both industry and academia, and it is changing our life in every aspect in the last decade. The design of wireless transceivers is the bottleneck for variety applications, due to RF modeling inaccuracy, stringent FCC regulations over the transmitted power spectrum, interference, multi-path...
    Resource Type:
    Dissertation
    Full Text:
    standard utilizes the 2.4GHz ISM band, 250-750MHz UWB band, and 3.1-10.6GHz UWB band. The 3.1-10.6GHz UWB