The ubiquity of high quality video and proliferation of mobile devices has contributed to an unprecedented rise in video consumption. HTTP, in conjunction with adaptive streaming, has become the de facto mechanism for delivering the vast majority of video as it readily caters to heterogeneous networks and devices. This dissertation...
This research focuses on receiver architectures which enable better spectral eciency
by handling blockers in the same spectral range as the signal. The presence of
such blockers, without the use of blocker cancelling/ ltering techniques leads to gain
compression and hence, consequent performance degradation of receivers leading to
reduced spectrum...
Traditional approaches to streaming H.264 video over a network typically rely on a single method of transport (i.e., reliable or unreliable) and/or use static values for parameters that can have a significant negative impact on the perceptual quality of the received video. This dissertation presents a dynamic method for wireless...
Analog-to-digital converters are essential components to the portable devices that we are using today. Wireless sensors, body implanted devices, communication devices and so forth require low power ADCs. Therefore achieving higher resolution and bandwidth with lower power consumption is targeted in ADCs design. In this work power efficient ADCs for...
Hybrid automatic repeat request (HARQ) schemes combine packet retransmission with forward error correction to ensure a reliable communications. In multiple-input multiple output (MIMO) systems, interference cancellation (IC) detection is widely used where the detection and cancellation steps of the simultaneously transmitted data streams occur. In principle, the signal stream estimated...
Threshold-based time of arrival (TOA) estimation is a technique for high-precision indoor localization. Existing threshold selection methods, such as xed thresh- old and normalized threshold methods, do not consider the signal-to-noise radio (SNR) value at the receiver. This is not desired for high-precision positioning. A proper threshold value depends on...
Optical wireless communication (OWC) is an alternative to radio frequency (RF)communication with a signi cantly larger and unregulated spectrum. In OWC systems, optical orthogonal frequency division multiplexing (O-OFDM) with intensity modulation and direct detection (IM/DD) is commonly used. There are two common signal structures in most OWC systems based on...
Advances in low-power digital integration and microelectro-mechanical systems (MEMS) have paved the way for micro-sensors. These sensors are equipped with data processing capabilities along with sensory circuits. Sensor data are processed on these individual sensors and transmitted to the target (sink). Lowcost integration and small sizes of these sensors have...
IO transactions within a computer system have evolved along with other system components (i.e., CPU, memory, video) from programmed IO (PIO). In current mainstream systems (spanning from HPC to mobile) the IO transactions are CPU-centric descriptor-based DMA transactions. The key benefit is that slower IO devices can DMA write system...
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
Indoor positioning systems can be used for many applications such as indoor navigation,emergence response, asset monitoring, and shopper assistance. Due to the weak received signal and multipath reflection, the global positioning system (GPS) generally does not work in indoor environments. There are a variety of radio frequency (RF) signals and...
In this paper, we propose a credit-based resource allocation technique for dynamic spectrum access (DSA) systems that is robust against malicious and selfi sh behaviors and ensures good overall system fairness performance while also allowing spectrum users to achieve high amounts of service. We also propose a new objective function...
In modern digital communication systems, error correction codes (ECC) are widely used and play an important role. The main effect of ECCs is to reduce the transmission error caused by channel noise, thereby protecting data and increasing the quality of information transmission. In addition, high spectral efficiency is desired in...
We consider the problem of finding unknown patterns that are recurring across multiple sets. For example, finding multiple objects that are present in multiple images or a short DNA code that is repeated across multiple DNA sequences. We first consider a simple problem of finding a single unknown pattern in...
As computation power continues to grow, the demand for data transfer bandwidth is also rising. This is reflected in the increasing data-rate of high-speed links. However, the increase in data-rate is sustainable only if the I/O energy efficiency improves as well. This dissertation explores several techniques to enable high-speed links...
Continues-Time (CT) Delta-Sigma (ΔΣ) Analog-to-Digital Converters (ADCs) have one important constrain, namely the excess loop delay. Most previous excess lop delay compensation methods need to know the exact value of the excess loop delay in advance. However, the value of the excess loop delay is a uniformly distribution random variable....
The potential for electric energy generation from ocean waves is substantial and much research is being conducted on the conversion process as a renewable, grid-connected, power source. Some of the same attributes that make wave energy harvesting attractive as a grid-connected source also make it attractive as a remote, or...
IC designers are continuously facing the challenges from reduced CMOS feature sizes and supply voltages. ADCs that deliver satisfactory resolutions/speeds while utilizing the state-of-the-art technologies to save power are in high demand. The analog circuits are more and more assisted by various digital calibration techniques to get boosted performances. This...
The broadband wireless interference in a computer platform is resulted by multiple electro-magnetic emission sources. This non-Gaussian interference is proved to be double-sided K-distributed in previous research. With the limitation of transmission power and dimension of the device, interference mitigation is an efficient way to improve received signal bit error...
Incremental ADCs (IADCs) have many advantages for low-frequency high-accuracy data conversion—they are easy to multiplex between channels, need simpler digital decimation filter, and allow extended counting with a Nyquist-rate ADC. A single-loop incremental ADC was designed and fabricated in 90 nm for a biosensor interface circuit. It incorporates one integrator,...
This dissertation presents two high-speed pipeline successive approximation analog-to-digital converters (SAR ADCs). Capacitive DACs and resistive DACs are utilized in these two pipeline SAR ADCs, respectively.
The pipeline SAR ADC with capacitive DACs can save 50% switching power compared with other time-interleaved SAR ADCs since the total capacitance of the...
Network coding, as the next generation of data routing protocols, enables each intermediate node in a network to process and encode its received data before forwarding it to the next nodes. Hence, the core idea in network coding is to allow a network to encode the data that is being...
Multi-instance data, in which each object (e.g., a document) is a collection of instances
(e.g., word), are widespread in machine learning, signal processing, computer vision,
bioinformatic, music, and social sciences. Existing probabilistic models, e.g., latent
Dirichlet allocation (LDA), probabilistic latent semantic indexing (pLSI), and discrete
component analysis (DCA), have been...
Multiple-input multiple-output (MIMO) antennas can be exploited to provide high data rate using a limited bandwidth through multiplexing gain. MIMO combined with orthogonal frequency division multiplexing (OFDM) could potentially provide high data rate and high spectral efficiency in frequency-selective fading channels. MIMO-OFDM technology has been widely employed in modern communication...
The increased use of mobile wireless devices that we have recently been witnessing, such as smartphones, tablets, e-readers, and WiFi enabled devices in general, is driving an unprecedented increase in the amount of data traffic. This fast market adoption of the wireless technology along with the tremendous success of multimedia...
MANETs are known to be useful in situations where mobile nodes need to communicate and coordinate in dynamic environments with no access to fixed network infrastructure. However, connectivity problems can occur when sub-groups within a MANET move out of communication range from one another. The increasingly prolific use of UAVs...
Mobile devices are becoming more prevalent and complex. As a result, the wireless communication aspect of these devices is becoming increasingly significant. At the same time, video demands in terms of availability and quality are also on the uprise. High definition (HD) video is the standard of choice for meeting...
Delta-sigma analog-to-digital converters traditionally have been used for low speed, high resolution applications such as measurements, sensors, voice and audio systems. Through continued device scaling in CMOS technology and architectural and circuit level design innovations, they have even become popular for wideband, high dynamic range applications such as wired and...
The quality of a digital image pipeline relies greatly on its color reproduction which should at a minimum handle the color constancy, and the final judgment of the excellence of the pipeline is made through subjective observations by humans.
This dissertation addresses a few topics surrounding the color processing of...
Relay-assisted cooperative communications are promising solutions for error-performance improvement and cell coverage extension. In this thesis, we propose several efficient cooperative relay communication schemes. First, an efficient space-time coded cooperative relay communications scheme that employs linear precoding and transmission-pattern selection is proposed. This is built upon an existing block linear...
High speed serial links are critical components for addressing the growing demand for I/O bandwidth in next-generation computing applications, such as many-core systems, backplane and optical data communications. Due to continued process scaling and circuit innovations, today's CMOS serial link transceivers can achieve tens of Gb/s per pin. However, most...
Short-range wireless communications continually attract interest from both industry and academia, and it is changing our life in every aspect in the last decade. The design of wireless transceivers is the bottleneck for variety applications, due to RF modeling inaccuracy, stringent FCC regulations over the transmitted power spectrum, interference, multi-path...
As more features are being integrated into mobile platforms, the demand for
long battery life during standby mode has been increasing. Light load efficiency
becomes one of essential features in today's DC-DC converter. The most effective
method to improve light load efficiency is to operate the DC-DC converter under
pulse-frequency-modulation...
Ultra-wideband (UWB) radio has become an attractive alternative for wireless communications due to the robustness to multipath fading, low power transmission, mostly-digital implementation, and low cost. Furthermore, short-range, high data-rates applications are possible with UWB radios due to the wide spectral
allocations at 3.1 - 10.6 GHz.
This thesis presents...
The enormous success of wireless technology has recently led to an explosive demand for, and hence a shortage of, bandwidth resources. This expected shortage problem is reported to be primarily due to the inefficient, static nature of current spectrum allocation methods. As an initial step towards solving this shortage problem,...
Powerline communication (PLC), is becoming a more commonplace method for data transmission, however it is still a very new medium for data transmission, and international standards for powerline communication are still in the process of being developed and established. PLC can provide a means of simplifying the device connectivity to...
Pulsed ultra-wideband (UWB) radio uses extremely short pulses to transmit information. Such pulses provide very fine timing information, which has led to technological advances in high-precision localization. This thesis investigates UWB localization strategies with a focus on receiver synchronization algorithms for time-difference-of-arrival localization to achieve centimeter accuracies in a 3-dimensional...