Hybrid automatic repeat request (HARQ) schemes combine packet retransmission with forward error correction to ensure a reliable communications. In multiple-input multiple output (MIMO) systems, interference cancellation (IC) detection is widely used where the detection and cancellation steps of the simultaneously transmitted data streams occur. In principle, the signal stream estimated...
Threshold-based time of arrival (TOA) estimation is a technique for high-precision indoor localization. Existing threshold selection methods, such as xed thresh- old and normalized threshold methods, do not consider the signal-to-noise radio (SNR) value at the receiver. This is not desired for high-precision positioning. A proper threshold value depends on...
General purpose computer systems have seen increased performance potential through the parallel processing capabilities of multicore processors. Yet this potential performance can only be attained through parallel applications, thus forcing software developers to rethink how everyday applications are designed. The most readily form of Thread Level Parallelism (TLP) within any...
MANETs are known to be useful in situations where mobile nodes need to communicate and coordinate in dynamic environments with no access to fixed network infrastructure. However, connectivity problems can occur when sub-groups within a MANET move out of communication range from one another. The increasingly prolific use of UAVs...
Mobile devices are becoming more prevalent and complex. As a result, the wireless communication aspect of these devices is becoming increasingly significant. At the same time, video demands in terms of availability and quality are also on the uprise. High definition (HD) video is the standard of choice for meeting...
The amount of instruction level parallelism (ILP) that can be exploited depends
greatly on the size of the instruction window and the number of in-flight instructions
the processor can support. However, this requires a register file with a large set of
physical registers for renaming and multiple ports to provide...
Powerline communication (PLC), is becoming a more commonplace method for data transmission, however it is still a very new medium for data transmission, and international standards for powerline communication are still in the process of being developed and established. PLC can provide a means of simplifying the device connectivity to...
Network coding, as the next generation of data routing protocols, enables each intermediate node in a network to process and encode its received data before forwarding it to the next nodes. Hence, the core idea in network coding is to allow a network to encode the data that is being...
The increased use of mobile wireless devices that we have recently been witnessing, such as smartphones, tablets, e-readers, and WiFi enabled devices in general, is driving an unprecedented increase in the amount of data traffic. This fast market adoption of the wireless technology along with the tremendous success of multimedia...
Pulsed ultra-wideband (UWB) radio uses extremely short pulses to transmit information. Such pulses provide very fine timing information, which has led to technological advances in high-precision localization. This thesis investigates UWB localization strategies with a focus on receiver synchronization algorithms for time-difference-of-arrival localization to achieve centimeter accuracies in a 3-dimensional...
New video-conference devices based on omnidirectional multi-camera systems have been emerging in the last few years. These devices require innovative and automated video quality assessment in the earlier stages of their design in order to guarantee competitive product development and quality monitoring. Current quality assessment techniques are not adequate since...
The purpose of this thesis is to explore methods which can reduce the power dissipation of a mobile system while decoding MPEG video. MPEG decoding is a microprocessor intensive process that makes heavy use of both the L1 and L2 caches as well as main memory. The heavy load placed...
This thesis presents a novel methodology that enables power efficient video decoding
in an embedded system based on MPSoC (Multiprocessor System on Chip). This
methodology is a physical combination of parallel processing which reduces power
consumption of processors by exploiting thread-level parallelism and Dynamic
Voltage Frequency Scaling (DVFS) that allows...
Analog-to-digital converters are essential components to the portable devices that we are using today. Wireless sensors, body implanted devices, communication devices and so forth require low power ADCs. Therefore achieving higher resolution and bandwidth with lower power consumption is targeted in ADCs design. In this work power efficient ADCs for...
Indoor positioning systems can be used for many applications such as indoor navigation,emergence response, asset monitoring, and shopper assistance. Due to the weak received signal and multipath reflection, the global positioning system (GPS) generally does not work in indoor environments. There are a variety of radio frequency (RF) signals and...
Optical wireless communication (OWC) is an alternative to radio frequency (RF)communication with a signi cantly larger and unregulated spectrum. In OWC systems, optical orthogonal frequency division multiplexing (O-OFDM) with intensity modulation and direct detection (IM/DD) is commonly used. There are two common signal structures in most OWC systems based on...
The enormous success of wireless technology has recently led to an explosive demand for, and hence a shortage of, bandwidth resources. This expected shortage problem is reported to be primarily due to the inefficient, static nature of current spectrum allocation methods. As an initial step towards solving this shortage problem,...
IO transactions within a computer system have evolved along with other system components (i.e., CPU, memory, video) from programmed IO (PIO). In current mainstream systems (spanning from HPC to mobile) the IO transactions are CPU-centric descriptor-based DMA transactions. The key benefit is that slower IO devices can DMA write system...
Transmission over wireless networks presents multiple technical challenges due to
noise, interference, fading, power constraints and bandwidth limitation. Different
solutions have been propposed to overcome these issues and some of them are
treated here. Cooperative diversity has been proposed as an implementation for
networks where terminals are restricted to using...
Incremental ADCs (IADCs) have many advantages for low-frequency high-accuracy data conversion—they are easy to multiplex between channels, need simpler digital decimation filter, and allow extended counting with a Nyquist-rate ADC. A single-loop incremental ADC was designed and fabricated in 90 nm for a biosensor interface circuit. It incorporates one integrator,...