This thesis focuses on two aspects of transparent electronics, SnO₂ transparent thin-film transistors (TTFTs) and transparent circuits. Both depletion- and enhancement-mode SnO₂ TTFTs are realized. The maximum effective mobility for the depletion- and enhancement-mode devices are 2 cm²V⁻¹s⁻¹ and 0.8 cm²V⁻¹s⁻¹, respectively. A variety of techniques to decrease the carrier...
In recent years, a new class of high-performance thin-film transistors (TFTs) has emerged comprising amorphous oxide channel materials composed of heavy-metal cations (HMCs) with (n-1)d¹⁰ns⁰ (n ≥ 4, where 'n' refers to the row of the periodic table) electronic configuration. This thesis is devoted to the fabrication and characterization of...
At frequencies exceeding 1-2 GHz, the reactive nature of a silicon substrate must be accounted in the substrate network models used in substrate coupling simulation. High-frequency substrate models, containing reactive components, must be validated through high-frequency network analyzer measurements. Prior fabricated test fixtures have been modified to enable high-frequency (up...
The integration of renewable energy sources and the associated power electronics to notebook power and thermal management systems was investigated in this work. Both thermoelectric (TE) and photovoltaic (PV) energy extraction techniques were explored with the goal of achieving best sustainability. Semi-realistic usage assumptions were taken into account to evaluate...
Multiple-input multiple-output (MIMO) antenna technology is promising
for high-speed wireless communications without increasing the transmission band-
width. Space time coding (STC) is a scheme that employs multiple antennas to
increase transmission rate or to improve transmission quality. STC is used widely
in mobile cellular networks, wireless local area networks (WLAN)...
The amount of instruction level parallelism (ILP) that can be exploited depends
greatly on the size of the instruction window and the number of in-flight instructions
the processor can support. However, this requires a register file with a large set of
physical registers for renaming and multiple ports to provide...
Efficient methods for simulating the substrate noise generated by complex synchronous and asynchronous digital logic circuits are presented. By simulating digital logic at the gate level, and precharacterizing the gates, the substrate noise generation can be predicted and used in a transistor level simulation of the sensitive analog blocks. This...
Accurate scaled modeling and simulation are critical to advancing ocean wave linear generator buoys. A 100th scaled model of ocean wave generator buoy systems is analyzed by solving the Navier-Stokes equations. These equations are numerically solved using Computational Fluid Dynamics (CFD) by implementing the front capturing method. In this thesis,...
Ultra-wideband (UWB) communication has emerged as a very promising
technology for short-range wireless applications, including
high-speed multimedia transmissions and sensor networks. UWB
system designs involve many different aspects covering analog and
digital processing, channel estimation and modeling, and
modulation and demodulation. Although UWB still faces many
challenges, significant progress has...
Systems biology is becoming increasingly important for the study of living organisms. It focuses on the mathematical understanding of biological systems. Cells, the basic units of all living creatures, are biological systems of major interest. Considerable work is being done towards modeling cells as mathematical systems. At the same time,...
The purpose of this thesis is to explore methods which can reduce the power dissipation of a mobile system while decoding MPEG video. MPEG decoding is a microprocessor intensive process that makes heavy use of both the L1 and L2 caches as well as main memory. The heavy load placed...
A large number of sequential decision-making problems in uncertain environments
can be modeled as Markov Decision Processes (MDPs). In such settings, an agent
can observe at each time step the state of the environment and then executes an
action, causing a stochastic transition to a new state of the environment...
In this thesis, maximum likelihood Doppler frequency estimation and phase noise suppression algorithms for Orthogonal Frequency Division Multiplexing (OFDM) systems are presented. A novel handover decision algorithm for wireless systems, called predictive base station switching (PBSS), is also introduced.
The maximum Doppler Frequency is the ratio of the speed of...
Circuits operating outside the earth’s atmosphere are more vulnerable to cosmic radiation and require special design consideration. The purpose of this work is to explore methods of mitigating the effect of radiation in phase locked loop (PLL) circuits. Several voltage controlled oscillators (VCOs) and two complete PLLs are designed and...
The primary objective of the thesis research is to study novel schemes of on-chip crosstalk suppression employing magnetic films at microwave frequencies. Since extraction of various material properties of the magnetic films is essential for successful application of the proposed method, the research also involves development of a new material...
The world's oceans contain tremendous renewable energy potentials. It is estimated that if 0.2% of the ocean's untapped energy could be harnessed, it could provide power sufficient for the entire world [1]. This thesis provides a comprehensive description of the state-of-the-art of ocean energy extraction technologies and lessons learned from...
The world’s energy consumption is growing at an alarming rate and the need for renewable energy is apparent now more than ever. Estimates have shown that optimization of the extraction of energy from the ocean could significantly aid the world’s quest for sustainable and affordable energy services for all. From...
Wave energy conversion devices are a rapidly growing interest worldwide for the potential to harness a sustainable and renewable energy source. Due to the oscillatory nature of ocean waves, the power generated from a permanent magnet linear generator (PMLG) for ocean wave energy conversion is pulsed. Focusing on direct drive...
There is a large and growing market for portable consumer audio products
with very small size. As the size of these products is reduced, the area occupied
by batteries becomes significant and hence limits the number of batteries to one.
In order to build such small products, high levels of...
High performance multi-cell delta-sigma modulators are a preferred choice in applications which require programmability. Multi-cell delta-sigma modulators with M unit cells provide 10log10(M) SQNR improvement for the same thermal noise and bias power due to the uncorrelated quantization noises of the M unit ADCs. This concept is used in this...
This thesis presents new, compact configurations for RF/microwave bandstop and lowpass filters for embedded passive applications. A simple design methodology is presented for designing the folded-transmission line filters on a microstrip platform. Unlike the conventional stub-loaded filter designs, the proposed folded-line filters will have practical dimensions for a wide range...
Transmission over wireless networks presents multiple technical challenges due to
noise, interference, fading, power constraints and bandwidth limitation. Different
solutions have been propposed to overcome these issues and some of them are
treated here. Cooperative diversity has been proposed as an implementation for
networks where terminals are restricted to using...
Achieving sharpened (enhanced detail) features of a multi-dimensional data source using the linear prediction (LP) bandwidth extrapolation (BWE) technique in the transform domain is the main objective of this research. The evolution of sensor technology has provided acquisition scenarios in which the data format is inherently multi-dimensional, including hyperspectral imaging...
Orthogonal frequency division multiplexing (OFDM), which has been very attractive for future high rate wireless communications, is very robust to channel multipath fading effect while providing high transmission data rate with high spectral efficiency.
Multiple antennas can be combined with OFDM to increase diversity gain and to improve spectral efficiency...
Nowadays, error correction codes have become an integral part in almost all the modern digital communication and storage systems. With the continuously increasing demands for higher speed and lower power communication systems, efficient VLSI implementations of those error correction codes have great importance for practical applications. In this thesis, several...
With the growing demand for portable/consumer electronics, such as digital
audio/video (AV), the downscaling of device dimensions, which enables the
integration of an increasing number of transistors in a single chip, is mandatory.
This trend also continuously pushes the power supply voltage down to reduce the
power consumption and improve...
The demand for portable electronic systems and the continued
down-scaling of device dimensions resulted in rapid improvement in
the performance of integrated systems. Several low-voltage design
techniques have been proposed to operate analog circuits with sub-1V
supply. However, these techniques require higher power consumption
to achieve large dynamic range while...
Low-Density Parity-check (LDPC) codes have attracted considerable attention due to their capacity approaching performance over AWGN channel and highly parallelizable decoding schemes. They have been considered in a variety of industry standards for the next generation communication systems. In general, LDPC codes achieve outstanding performance with large codeword lengths (e.g.,...
To realize pipelined ADCs in deep-submicron processes, low voltage techniques
must be developed to work around problems created by limited supply voltages such as
the floating switch dead zone, reduced SNR, and reduced OpAmp performance.
This thesis analyzes standard and low voltage design issues for pipelined ADCs
and proposes a...
Power reduction can be achieved at many different levels, such as architecture, algorithm, logic, and transistor levels in circuit design. This thesis focuses on low power scheduling at the algorithm level. We present a latency-constrained scheduling and a latency and resource constrained scheduling, which minimize power consumption for the resources...
As the functionality of digital chips continues to increase dramatically, chip- to-chip communication bandwidths must scale accordingly to avoid constraining the overall system performance. Therefore, high speed transceiver design has be- come an important research topic. In particular, the performance of the circuits that are responsible for timing accuracy are...
The problem of locating a signal source, or an emitter, has many civilian and military applications, such as communication regulations enforcement, military reconnaissance, and search-and-rescue operations. Many of the most widely used emitter location methods rely on the accurate and robust estimation of the differential time delay,
or time-difference-of-arrival (TDOA),...
A significantly untapped renewable energy source exists in the world's oceans. It is estimated that if 0.2% of the ocean's untapped energy could be harnessed, it could provide power sufficient for the entire world. Ocean energy extraction is an old concept, and it is currently seeing the benefit of advancing...
Dynamic multithreaded processors attempt to increase the performance of a single
sequential program by dynamically extracting threads from sources such as loop
iterations. The scheduling of instructions in such a processor plays a vital role in the
amount of thread level parallelism that can be extracted and thus the overall...
The primary objective of this thesis is to explore new absorber and p-type window layer materials for thin-film solar cell applications. A new thin-film electron beam deposition system has been installed, is now operational, and has been used to deposit several types of solar cell absorber layers. Material investigations include...
Smart weapons promise to provide leap ahead capability with regard to accuracy and engagement range for medium and large caliber projectiles. One of the most critical components of a smart weapon system is its sensor suite that provides position, orientation, and velocity information as the projectile flies down range so...
The detection of motor faults at their incipient stage is of prime importance to any industrial plant. The introduction of adjustable speed drives has improved the control and the efficiency of induction motors, however, this has changed the nature of motor faults and how they can be detected.
Current signature...
Although the digital revolution can realize many of past analog components in the digital forms, our world is surrounded with analog signals such as voice, temperature, etc. The bridge between these two worlds is one of key performance limitations among overall systems and it includes analog filters and data converters....
Ultra-wideband (UWB) radio is the transmission of data using an extremely wide bandwidth and very low power spectral density. In this thesis, the mereits and challenges of UWB architectures versus conventional narrowband architectures will be compared. Pulsed UWB systems can be implemented with very simple architectures. These advantages make UWB...
In advanced hybrid electric vehicle development, performance and dependability are essential considerations in the design process. High efficiency is crucial in a successful design and fault tolerance is necessary to provide limp-home capability under faulted operating conditions. The reduction of electromagnetic interference is mandatory to reduce interference in communications and...
Ferrites have been used for various high frequency applications as bulk
materials. These applications, however, are limited to large dimension devices. In
this thesis, thin film ferrites were deposited from a low temperature solution-based
deposition process that is suitable for micro-scale high frequency applications. The
low temperature nature of this...
The substrate noise injected by a stepped buffer circuit into two single-ended 1.5GHz low noise amplifiers is examined for a heavily doped 0.25µm CMOS process. The difference in the LNA noise rejection is characterized as a function of the size and placement of substrate contacts. The use of a resistive...
End-user programmers, because they are human, make mistakes. However, past research has not considered how visual end-user debugging devices could be designed to ameliorate the effects of mistakes. This paper empirically examines oracle mistakes mistakes users make about which values are right and which are wrong to reveal differences in...
Continuously tunable diode laser sources coupled to single-mode fiber are useful sources for fiber Bragg grating (FBG) strain sensors. This paper describes the
development and fabrication of such a device. An introduction is given describing
applications of tunable lasers and some of the different methods of creating a tunable
diode...
The main contributions of this thesis are the development and
application of four computationally efficient solutions for
least-squares-based (LS-based) minimum variance spectral estimation
(MVSE). They are: (1) fast computational solution for the 1-D
covariance LS-based MVSE, (2) fast computational solution for the
1-D modified covariance LS-based MVSE, (3) fast computational...
Full dynamic control of physically simulated characters is the holy grail of video
games and other interactive applications. Recent advances in the field have
presented controllers that can handle the balance and fall response after a
collision. This thesis addresses the development of a controller that handles the
response before...
Digital-to-analog converters (DACs) suffer from static and dynamic nonlinearity problems, which degrade their accuracy and performance. Mismatch errors in the analog components restrict the maximum achievable linearity.
This thesis presents various techniques for correcting these errors. It describes a correction process for the nonlinear behavior of DACs, on three different...
Previous research has revealed gender differences that impact females’ willingness to adopt software features in end users’ programming environments. Since these features have separately been shown to help end users problem solve, it is important to female end users’ productivity that we find ways to make these features more acceptable...
Multiple-input multiple-output (MIMO) communication systems have recently been considered as one of the most significant technology breakthroughs for modern wireless communications, due to the higher spectral efficiency and improved link reliability. The sphere decoding algorithm (SDA) has been widely used for maximum likelihood (ML) detection in MIMO systems. It is...
Harvesting energy from the environment for powering micro-power devices have been increasing in popularity. These types of devices can be used in embedded applications or in sensor networks where battery replacement is impractical. In this dissertation, different methods of energy harvesting from the environment are explored as alternative sources of...
A discrete trap model is developed and employed for elucidation of thin-film transistor (TFT) device physics trends. An attractive feature of this model is that only two model parameters are required, the trap energy depth, E[subscript T], and the trap density, N[subscript T]. The most relevant trends occur when E[subscript...
A digital implementation of a PLL has several advantages compared to its
analog counterpart. These include easy scalability with process shrink, elimination
of the noise susceptible analog control for a voltage controlled oscillator (VCO) and
the inherent noise immunity of digital circuits. Several recent digital PLL (DPLL)
implementations have achieved...
As the Tekbots program expands into senior and graduate level classes at Oregon State University, so does the need arise for more complex learning platforms. These complex hardware platforms cannot be adequately tested in a manufacturing environment as we have done previously. Also, due to their complexity, these platforms require...
The aim of this dissertation is to develop oxide semiconductors by radio-frequency
sputtering for thin-film transistor (TFT) applications. A variety of oxide semiconductors
are used as the TFT channel layer, including indium gallium oxide (IGO), zinc tin
oxide (ZTO), and indium gallium zinc oxide (IGZO). The variety of materials used...
Spacecrafts experience radiation in the course of their operation
and all electronic equipment on board these spacecrafts has to
be designed to withstand the effects of this radiation.
This thesis describes the effects of total ionization dose (TID)
and single event transients (SET) in phase-locked loops - an
important circuit...
The continued scaling of deep-submicron CMOS technology enables low-voltage high-frequency phase-locked loops (PLLs) to be fully integrated in complex mixed-signal systems. However, fluctuations due to the manufacturing process and variations in
environmental conditions, such as supply voltage and temperature, are also significantly increased. As a result, the performance of PLLs...
With the ever-increasing demand for portable devices used in applications
such as wireless communication, mobile computing, consumer electronics, etc.,
the scaling of the CMOS process to deep submicron dimensions becomes more
important to achieve low-cost, low-power and high-performance digital systems.
However, this downscaling also requires similar shrinking of the supply...
Scaling of CMOS technology has progressed relentlessly for the past several
decades. In order for this unprecedented scaling to benefit the performance of
large digital systems, the communication bandwidth between integrated circuits
(ICs) must scale accordingly. However, interconnect technology does not scale as
aggressively, making communication between chips the major...
In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications.
So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....
The purpose of this thesis is to explore dependency speculation in Dynamic Simultaneous Multi-Threading (DSMT). DSMT is a microprocessor architecture which attempts to extract Thread Level Parallelism (TLP) from single-threaded programs at run-time. This is accomplished by running multiple iterations of program loops in parallel. The DSMT architecture was originally...
There is a new possibility of generating deep ultraviolet laser radiation from a solid-state source. With recent advances in material development, a new nonlinear optical crystal provides a greater damage threshold than current materials making higher conversion efficiencies possible.
This thesis examines the possibility of using this crystal to generate...
Authentication protocols play important roles in network security. A variety of authentication protocols ranging from complex public-key cryptosystems to simple password-based authentication schemes have been proposed. However, currently there is no fully secure authentication scheme that can resist all known attacks. When a user authentication is performed over an insecure...
This thesis focuses on two aspects of oxide-based thin-film transistors (TFTs), contact resistance and instability assessment.
First, determination of the contact resistance of indium tin oxide (ITO) on two wide-band gap semiconductors, zinc oxide (ZnO) and indium gallium oxide (IGO), is attempted and the effects of contact resistance on device...
A Z-parameter based macromodel for characterizing the substrate noise coupling in a lightly doped substrate at low frequencies has been developed. The model is scalable with contact geometries and separation. The cross-coupling impedance between two contacts is modeled using an improved geometric mean distance formulation. This approach obviates the need...
This thesis presents a comparison of time-domain and frequency-domain algorithms for phase noise calculation in oscillators. Floquet theory provides the mathematical foundation for these calculations and the numerical methods employ perturbation projection vectors (PPVs). The PPVs are an estimate of an oscillator's sensitivity to noise.
The in-house circuit simulator SPICE3...
Delay insensitive asynchronous circuitry provides significant advantages with
respect to substrate noise due to localized switching. The differences between the
substrate noise from NULL Convention Logic (NCL) and traditional Clocked
Boolean Logic (CBL) are described and analyzed based on measured results. A test chip fabricated in the TSMC 0.25 um...
A digital phase locked loop (DPLL) and a statistical time-to-digital converter (STDC) were previously fabricated in a 0.35µm, 3.3V SOI CMOS process. This work summarizes these designs and characterizes the measured performance. Simulations supplement the measurements where applicable.
The DPLL was found to reach a locked state under a limited...
Designing spectral efficient, high-speed wireless links that offer high quality-
of-service and range capability has been a critical research and engineering challenge. In this thesis, we mainly address the complexity and performance issues of
channel estimation and data detection in multiple-input multiple-output (MIMO)
orthogonal frequency division multiplexing (OFDM) systems over...
Contemporary circuit design involves significant computer-based simulation, calling for a balance between circuit model accuracy and simulation run time. Traditionally, circuit modelers concentrated on producing either (1) physically-based models, where each element in the model correlates to a physically meaningful aspect of the device being modeled or (2) mathematically-based "macromodels,"...
An automated method, requiring the fabrication of a small set of test structures, efficiently extracts the coefficients of Z-parameter based macromodels. The extraction approach has been validated for both heavily and lightly doped substrates and can be applied to a variety of technologies. After the parameters of a macromodel have...
Conventional register files spread porting resources uniformly across all registers. This paper proposes a method called Asymmetric Clustering using a Register Cache (ACRC). ACRC utilizes a fast register cache that concentrates valuable register file ports to the most active registers thereby reducing the total register file area and power consumption....
Analog-to-Digital Data Converters (ADCs) used in instrumentation and measurements often require high absolute accuracy, including excellent linearity and negligible dc offset. Incremental data converters (IDCs) provide a solution for such measurement applications. Since IDCs are essentially delta-sigma converters with reset operation before each conversion, they retain most of the advantages...
A computationally efficient and accurate substrate noise coupling model for multiple contacts in heavily doped CMOS processes is presented and validated with simulations and experimental data. The model is based on Z parameters that are scalable with contact separation and size. This results in fast extraction of substrate resistances for...
This thesis presents a Z-parameter based model to predict the substratenoise coupling between two contacts in a heavily doped substrate for frequenciesless than 2 GHz. The empirical model is scalable with contact size and spacingsbetween the contacts and model parameters can be readily extracted from simu-lated or measured data. The...
Cryptographic devices leak timing and power consumption information that is easily measurable, radiation of various levels, and more. Such devices also have additional inputs, other than plaintext and keys, like voltage, which can be modified to force the device to produce certain faulty outputs that can be used to reveal...
Traditionally linear actuator applications are addressed by the use of hydraulic systems. The high maintenance cost and poor reliability will always be the most critical problem in the real applications. Benefited from both the high mechanical advantage of the roll screw and the simple structure of the switched reluctance motor,...
In modern on-chip memories, an increasing demand for higher performance, lower power, reduced area, and improved robustness creates a rising need for advanced microarchitecture and circuit design techniques. Particularly in large-signal multi-ported register files, these advanced design techniques include: (i) multi-banked arrays, (ii) multi-frequency arrays, (iii) multi-bit width gating, (iv)...
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are widely used in wireless transceivers. Recently, continuous-time (CT) ΔΣ ADCs gain growing interest in wireless applications for their lower power consumption and wider input bandwidth as compared with the discrete-time (DT) counterparts.
In this thesis, a wideband low-power CT ΔΣ modulator for next generation...
At frequencies exceeding 1-2 GHz, the substrate network models used in substrate coupling simulation must account for the reactive nature of the substrate. Unlike at low frequencies, where the purely resistive substrate models can be validated through DC resistance measurements, these high-frequency models, comprising reactive components, must be validated through...
Recently, delta-sigma modulation has become a widely applied technique for high-performance analog-to-digital conversion of narrow-band signals. Most of the early designs used discrete-time structure for good accuracy and good linearity. The transfer functions are independent of the clock frequency. However, high unity-gain bandwidths of the opamps are required to satisfy...
This thesis presents a design-oriented model for lightly doped CMOS substrates. The model predicts the substrate noise coupling between noisy digital and sensitive analog blocks in the early stages of the design. The model scales with the size and separation of these blocks and it is validated with device simulations...
Digital phase-locked loops (PLLs) have been receiving increasing attention recently due to their ease of integration, scalability and performance comparable to their analog counterparts. In digital PLLs, increased resolution in time-to-digital conversion is desirable for improved noise performance. This work describes the design and simulation of a stochastic time-to-digital converter...
What are the most effective ways to improve the engineering curriculum? Improvements should result in increased student retention, undergraduates who are more industry-ready and graduates who are better prepared to be leaders. Current research suggests that the best predictor of persistence is a person’s self-efficacy. The focus of this thesis...
Ocean wave energy is rapidly becoming a field of great interest in the world of renewable energy. Significant advancements in design and technology are being made to make wave energy a viable alternative for our growing energy demands. The two major hurdles for ocean wave energy to make a significant...
Digital-to-analog converters (DACs) with wide dynamic range and high
linearity are required for high-end audio applications. A multi-bit delta sigma
audio DAC, using a novel gain-correction technique, is described in this thesis. For
widely varying on-chip RC time constant, the DAC gain can be accurately
controlled by the correction circuitry....
The design of a 10-bit pipelined charge redistribution DAC employing MOSCAPs biased in their accumulation mode is presented in this thesis. A switched capacitor filter and output buffer have also been designed for the system. The effect of MOSCAP nonlinearity on the performance of the pipelined charge redistribution DAC has...
Determining the performance characteristics of various ocean wave energy converters (OWEC) has proven to be difficult due to problems replicating a baseline motion profile in the ocean or wave tank to compare these devices. The linear test bed seeks to mechanically simulate the relative linear motion between the active components...
This dissertation presents a dual-path 2-0 MASH (Multi-stAge-noise -SHaping) ADC with two verified digital corrections of DAC mismatch error and quantization noise leakage. By using these two techniques, the requirements for the analog circuits are greatly relaxed. The dual-path structure generates two outputs, one only composed of conversion errors, the...
Commonly proposed ocean wave energy converters (OWEC) use inefficient and maintenance demanding intermediate hydraulic and pneumatic systems. We propose a novel rotary direct-drive OWEC that eliminates these intermediate stages. The new device employs a contactless force transmission system (CFTS) comprising a “piston” and a “cylinder” and a ball screw to...
Recently, continuous-time ΔΣ modulators are appearing increasingly often in both the literature and the marketplace due to their features of inherent antialiasing and relaxed requirements for opamp and so on. However, several nonideal factors such as clock jitter, excess loop delay, inter-symbol interference and so on, degrade the SNR performance...
This thesis presents a channelized digital receiver design for UWB sytems in a multipath indoor environment. The UWB technology has been used for commercial and military purposes due to a number of advantages such as low-power consumption, noise-like and carrier free. The energy of UWB signal is spread over a...