Modern day digital systems employ frequency
synthesizers to provide a common clock to the system.
They are undergoing large scale integration due to which, mitigation
of the effect of noise on power supply has become a major design consideration
in clocking circuits. Rapid scaling of CMOS technology mandates the
design...
This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise.
In the calibration mode, the incremental ADC...
In wireless sensor network applications, low-power operation of the wireless receiver is critical. To address this need an ultra-low power Binary Frequency Shift Keying (BFSK) receiver using the super-regenerative architecture is developed.
A prototype receiver is built and tested for operation in the 900 MHz ISM band. Lab measurements show...
Error correction codes (ECCs) have been widely used in communication systems and storage devices. Nowadays, the rapid development of integrated circuit technologies makes feasible the implementation of powerful ECCs such as turbo code and low-density parity-check (LDPC) code. However, these high-performance codes require complex decoding algorithms, resulting in large hardware...
Recent advances in wireless technologies have helped the proliferation of wireless devices, ranging from hand-held devices such as cellular phones to more powerful mobile computing platforms as such laptops [1]. Along with that, the end users’
applications running on these devices, ranging from text message to multimedia applications such as...
Multiple-input multiple-output wireless systems promise significant capacity gain
and/or diversity gain over single antenna systems. If channel state information (CSI)
is available at both the transmitter and the receiver, the performance can be further
improved. In this thesis, first, we study binary index feedback problem in beamforming
systems when the...
High speed and high resolution analog-to-digital converter is a key building block for broadband wireless communications, high definition video applications, medical images and so on. By leveraging the down scaling of the latest CMOS technology and the noise shaping properties, delta-sigma (ΔΣ) ADCs are able to achieve wide-band operation and...
This thesis describes circuit architectures and techniques that facilitate the
automatic synthesis and fabrication of analog-to-digital converters (ADCs). Since
automated synthesis already exists for digital circuits and is part of the digital
circuit design flow, this work demonstrates the feasibility of ADC synthesis with
little or no modification to presently...
Advances in process technologies have led to the development of low-power high speed digital signal processing blocks that occupy small areas. These advances are critical in the development of portable electronic devices with small feature size and long battery life. However, the design of analog and mixed-signal
building blocks, especially...
Delta-sigma analog-to-digital converters (ADCs) are suitable for many applications due to several advantages such as relaxed anti-aliasing filter, high signal-to noise and distortion ratio (SNDR) and most important of all, reduced sensitivity to
analog imperfections.This thesis introduces several structures to overcome loop imperfections and stability issues in delta-sigma modulators. First,...
Ocean wave energy shows great potential as a developing form of renewable energy. However, challenges arise in maturing this technology to achieve cost-effective energy conversion. Development and testing of wave energy converters can be problematic due to the harsh environment in which they are operated. To promote development of this...
Phase-Locked Loops (PLLs) are essential building blocks in many communication systems. Designing high performance analog PLLs in the presence of technology imposed constraints such as leakage, poor analog transistor behavior, process variability, and low supply voltage is a challenging task. To overcome these drawbacks, digital PLLs (DPLLs) have recently emerged...
We investigate a number of techniques for increasing throughput and quality of media applications over wireless networks. A typical media communication application such as video streaming imposes strict requirements on the delay and throughout of its packets, which unfortunately, cannot be guaranteed by the underlying wireless network due inherently to...
Advances in electronic systems have lead to the demand for high resolution, high bandwidth Analog-to-Digital Converters (ADCs). Oversampled ADCs are well- known for high accuracy applications since they benefit from noise shaping and they usually do not need highly accurate components. However, as a consequence of oversampling, they have limited...
The classical store-and-forward routing has and will continue to be the most important routing architecture in many modern packet-switched communication networks. In a packet-switched network, data is sent in the form of discrete packets that traverse hop-by-hop from a source to a destination. At each intermediate hop, the router stores...
As CMOS processes keep scaling down devices, the maximum operating frequencies of CMOS devices increase, and hence circuits can process very wide band signals. Moreover, the small physical dimensions of transistors allow the placing of many more blocks into a single chip, including highly accurate analog blocks and complicated digital...
Short-range wireless communications continually attract interest from both industry and academia, and it is changing our life in every aspect in the last decade. The design of wireless transceivers is the bottleneck for variety applications, due to RF modeling inaccuracy, stringent FCC regulations over the transmitted power spectrum, interference, multi-path...
As the semiconductor industry works to integrate increasingly more "non-CMOS" devices onto CMOS ICs, compact model development has become an important step in the circuit/system verification tool flow. This research focuses on the two- and three-dimensional modeling of the physical phenomena that occur in nanoscale magnetic devices. This includes the...
The future of mixed-signal, memory, and microprocessor technologies are dependent on ever increasing analog and digital integration, higher cell densities, and demand for more processing power. As a result MOSFET device dimensions continue to shrink to meet these demands. A side effect of device scaling is increased variability at each...
The imperfections of the propagation channel due to channel fading and the self-generated noise from the RF front-end of the receiver cause errors in the received signal in electronic communication systems. When network coding is applied, more errors occur because of error propagation due to the inexact decoding process. In...
As the number of mobile devices accessing large-scale WLANs such as campus
and metropolitan area networks increases, the need for load balancing among the
cells becomes crucial. In addition, the network must also support some minimum
handoff tolerance defined by an application.
A number of load balancing techniques have been...
The decrease of switching times accompanied by the corresponding increase of
clock speeds and data rates, contributes to improve the overall system
computational performance. At the same time, they also affect wireless
communications due to an increment in the emissions of electromagnetic
radiation on the radio bands.
In this dissertation...
In networked control systems (NCS) information or packets usually flow from a
sensor or a set of sensors to a remotely located controller. Then the controller
processes the received information and sends a series of control commands to the
actuators through a communication network which could be either wireless or...
As the number of autonomous data collection applications keep increasing, the demand for wireless sensor networks (WSNs) has seen explosive growth. In this dissertation, an ultra-low-energy WSN transmitter is developed to reduce the energy consumption of sensor nodes in WSNs. With an ultra-low-energy transceiver, it is possible to eliminate the...
Two aspects of ADC system performance are addressed in this work. First, the combination of the ADC and its associated reference are co-designed for an energy constrained remote sensing system. Second, sampling linearity is mathematically analyzed as a function of frequency to provide enhanced understanding into an ADC's requisite sampling...
High speed serial links are critical components for addressing the growing demand for I/O bandwidth in next-generation computing applications, such as many-core systems, backplane and optical data communications. Due to continued process scaling and circuit innovations, today's CMOS serial link transceivers can achieve tens of Gb/s per pin. However, most...
Renewable energy is a topic of significant interest and importance in the world today. Ocean wave energy, particularly in areas such as the Oregon Coast, has considerable potential as a renewable resource. However, to rightly evaluate the overall cost of energy for wave energy converters, survivability and maintenance issues must...
There is a significant need in recent mobile communication and wireless broadband
systems for high-performance analog-to-digital converters (ADCs) that have wide
bandwidth (BW>5-MHz) and high data rate (>100-Mbps). A delta-sigma ADC is
recognized as a power-efficient ADC architecture when high resolution (>12-b) is
required. This is due to several advantages...
Relay-assisted cooperative communications are promising solutions for error-performance improvement and cell coverage extension. In this thesis, we propose several efficient cooperative relay communication schemes. First, an efficient space-time coded cooperative relay communications scheme that employs linear precoding and transmission-pattern selection is proposed. This is built upon an existing block linear...
Low power, high speed serial transceivers are employed in a wide range of applications ranging from chip-to-chip, backplane, and optical interconnects. Apart
from being capable of handling a wide range of data rates, the transceivers should
have low power consumption (mW/Gbps) and be fully integrated. This work
discusses enabling techniques...
Hand-held devices are among the most successful consumer electronics in modern society. Behind these successful devices, lies a key analog design technique that involves high-performance analog-to-digital conversion combined with very low power consumption. This dissertation presents two different approaches to achieving high power efficiency from a two-step pipelined architecture, which...
The quality of a digital image pipeline relies greatly on its color reproduction which should at a minimum handle the color constancy, and the final judgment of the excellence of the pipeline is made through subjective observations by humans.
This dissertation addresses a few topics surrounding the color processing of...
Over the last decade the increase in penetration of wind power and its variable nature has begun to add considerable stress to and threatened the stability of the nation's grid. In order to continue growth wind farms will need to have the ability to participate in the same grid frequency...
The objective of this dissertation is to develop amorphous metal thin films (AMTFs) for two-terminal electrical device and nanolaminate applications. Two AMTFs, ZrCuAlNi and TiAl, are investigated in both two-terminal electrical device and nanolaminate applications. Material properties including composition, atomic order, surface morphology, surface potential, and electrical resistivity are explored....
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
Delta-sigma analog-to-digital converters traditionally have been used for low speed, high resolution applications such as measurements, sensors, voice and audio systems. Through continued device scaling in CMOS technology and architectural and circuit level design innovations, they have even become popular for wideband, high dynamic range applications such as wired and...
Indium-gallium-zinc oxide (IGZO) and zinc-tin oxide (ZTO) are investigated for thin-film transistor (TFT) applications. Negative bias illumination stress (NBIS) is employed for electrical stability assessment. Unpassivated IGZO and ZTO TFTs suffer from severe NBIS instabilities. Zinc-tin-silicon oxide is found to be an effective passivation layer for IGZO and ZTO TFTs,...
Digitally controlled switching DC-DC converters have recently emerged as an attractive alternative to conventional switching converters based on analog control techniques. This research focuses on eliminating the issues associated with the state of the art switching converters by proposing three novel control techniques: (1) a digitally controlled Buck-Boost converter uses...
Indoor localization systems have a variety of applications such as tracking of assets, indoor robot navigation, and monitoring of people (e.g. patients) in hospitals or at home. Global positioning system (GPS) offers location accuracy of several meters and is mainly used for outdoor location-based applications as its accuracy degrades significantly...
A comprehensive and scalable solution for high-performance switched capacitor amplification is presented. Central to this discussion is the concept of ring amplification. A ring amplifier is a small modular amplifier derived from a ring oscillator that naturally embodies all the essential elements of scalability. It can amplify with accurate rail-to-rail...
Desire for low-power, high performance computing has been at core of the symbiotic union between digital circuits and CMOS scaling. While digital circuit performance improves with device scaling, analog circuits have not gained these benefits. As a result, it has become necessary to leverage increased digital circuit performance to mitigate...
The increased use of mobile wireless devices that we have recently been witnessing, such as smartphones, tablets, e-readers, and WiFi enabled devices in general, is driving an unprecedented increase in the amount of data traffic. This fast market adoption of the wireless technology along with the tremendous success of multimedia...
Fabrication techniques and process integration considerations for amorphous oxide semiconductor (AOS) thin-film transistors (TFTs) constitute the central theme of this dissertation. Within this theme three primary areas of focus are pursued.
The first focus involves formulating a general framework for assessing passivation. Avoiding formation of an undesirable backside accumulation layer...
Multiple-input multiple-output (MIMO) antennas can be exploited to provide high data rate using a limited bandwidth through multiplexing gain. MIMO combined with orthogonal frequency division multiplexing (OFDM) could potentially provide high data rate and high spectral efficiency in frequency-selective fading channels. MIMO-OFDM technology has been widely employed in modern communication...
Multi-instance data, in which each object (e.g., a document) is a collection of instances
(e.g., word), are widespread in machine learning, signal processing, computer vision,
bioinformatic, music, and social sciences. Existing probabilistic models, e.g., latent
Dirichlet allocation (LDA), probabilistic latent semantic indexing (pLSI), and discrete
component analysis (DCA), have been...
In an industrial and consumer electronic marketplace that is increasingly demanding greater real-world interactivity in portable and distributed devices, analog to digital converter efficiency and performance is being carefully examined. The successive approximation (SAR) analog to digital converter (ADC) architecture has become popular for its high efficiency at mid-speed and...
Wireless sensor networks are becoming important in several monitoring and sensing applications. Ultra low power consumption in the sensor nodes is important for extending the battery life of the nodes. In this dissertation, two low power BFSK receiver architectures are proposed and verified with prototype implementations in silicion.
A 2.4...
Voltage controlled oscillator (VCO) based ADC is an important class of time-domain ADC that has gained widespread acceptance due to their several desirable properties. VCO-based ADCs behave like an open-loop continuous time ΔΣ modulator and achieve excellent resolution by first order noise shaping the quantization error. However, the SNDR of...
Frequency synthesizers are critical components of all communication systems. This thesis considers the issue of undesirable frequency spurs of a relatively recent type of frequency synthesis architecture called digital-to-time conversion (DTC). The DTC-based frequency synthesis architecture has important performance benefits over older frequency synthesizers, such as fast frequency switching, large...
As the growth of renewable energy sources, such as wind, solar, and ocean wave, increases, their impact on the electrical grid has been rapidly escalating. Although renewable resources have been able to offset some traditional generation, they have also brought a need for increasing reserve capacity due to their non-dispatchable,...