The Timoshenko beam theory, as an engineering alternative to
the elementary and exact theories, introduces a factor, k', called
the shear coefficient which has been given various interpretations and
values. It is the objective of this study to experimentally evaluate
k' for a brass bar of rectangular cross-section.
Analytical results...
The effects of round, square, and reentrant entrances on flow
regimes and local heat transfer coefficients were determined using a symmetrical,
plane-wall two-dimensional, subsonic air diffuser with one
of the diverging walls heated and maintained isothermal.
Flow and heat transfer studies were made at total divergence
angles ranging from 0...
A program of research has been established at Oregon State
University to study wood residue combustion using an experimental
spreader-stoker combustor. This research was conducted to increase
the understanding of combustion occurring in wood fired boilers.
Using Douglas Fir screened to 3/8-3/4 inches, two 4x4 factorial
experiments were conducted varying...
Wave dispersion and fracture are phenomena that involve. mechanisms triggered at the scale of a material's internal structure. Experiments were performed with a candidate material to judge the hypothesis that wave dispersion measurements can be used to nondestructively predict fracture strength. Wood-based particleboard was chosen as the candidate material because...
Adequate lubrication is of the utmost importance in internal combustion engines. Low temperature operation with low-proof alcohol may create some operational problems if alcohol and or water accumulates in the crankcase oil. Condensates of unburned alcohol and water may be blown into the crankcase oil with blow by gases. The...
This study is primarily concerned with the measurement of the local radiative component of total heat transfer around a horizontal tube immersed in a large particle fluidized bed at elevated temperatures.Total heat transfer was also measured in order to assess the relative radiation contribution.The radiation measurement probe employs a silicon...
The influence of microwave radiation on the fabrication
of cermet materials has been investigated for alumina-titanium
cermets with compositions ranging from 20 to 80 wt. % titanium.
An industrial microwave oven was characterized and adapted to
process cermet materials. Physical and mechanical property
determinations were made as a function of...
The objective of this investigation is the development
of improved techniques for the estimation of robustness for
dynamic systems with structured uncertainties, a problem
which was approached by application of the Lyapunov direct
method. This thesis considers the sign properties of the
Lyapunov function derivative integrated along finite intervals
of...
Recently, fiber-reinforced plastics (FRP lamina) have
been applied to glued-laminated (glulam) timber for the
purpose of improving bending strength and stiffness.
Initially, full length reinforcement using FRP lamina was
developed. However, the cost of FRP lamina is a significant
portion of the total cost of reinforced glulam. Therefore,
it is...
The Oregon State University (OSU) Advanced Plant Experiment (APEX) is a one-fourth height, one-half time scale, reduced pressure integral systems test facility designed to model the long-term cooling capabilities of the emergency core cooling systems of the Westinghouse AP600. This study provides a brief description of the APEX test facility,...
A hypothesis used to explain the relationship between timber harvesting
and landslides is that tree roots add mechanical support to soil, thus increasing
soil strength. Upon harvest, the tree roots decay which reduces soil strength and
increases the risk of management -induced landslides. The technical literature
does not adequately support...
Volatile organic emissions (VOCs) from the kiln drying
of lumber are of concern to government, research agencies,
and the forest products industry. In the Pacific
Northwest, neither the quantity of VOC emissions from kilns
drying Douglas-fir is available, nor the effects of drying
schedule and lumber-related characteristics on the
emissions....
The phenomena of interest in this work is the thermal stratification which occurs during the early stages of a loss of coolant accident (LOCA) in the OSU APEX Thermal Hydraulic Test Facility, which is a scaled model of the Westinghouse AP600 nuclear power plant. Thermal stratification has been linked to...
The primary goal of any model is to emulate, as closely as possible, the desired behavioral phenomena of the real system but still maintain some tangible qualities between the parameters of the model and the system response. In keeping with this directive, models by their very nature migrate towards increasing...
This study investigates the atmospheric flight dynamics of a munition system and the effect of a tether reel resistance mechanism for limiting the impact that the unreeling process has on the munition system. The munition system consisting of two projectiles connected by a tether line is released from an aircraft...
An analysis and modeling method of the diagnostic characteristics of a mechanical or electromechanical system is presented. Diagnosability analysis is especially relevant given the complexities and functional interdependencies of modern-day systems, since improvements in diagnosability can lead to a reduction of a system's life-cycle costs. The diagnosis process of a...
The effects of the orifice geometry and the surface boundary condition on the heat transfer distribution to a flat surface of an impinging jet array were investigated. The jet array impinged normally onto the surface which was either isothermal or had a uniform heat flux. The experiments were performed for...
Eighteen Ponderosa Pine (Pinus ponderosa Dougl.ex.laws) veneer flitches
were randomly selected and crosscut into paired flitches. Serpentine-end-matched
(SEM) joints were machined in the flitches, joint amplitude equal to the width in
one half of the paired flitch and joint amplitude equal to 2/3 width in the other half
of the...
Lake Kinneret is Israel's only fresh water lake (unless you count the Dead Sea). It spans roughly 20km from north to south, and about 12km at its widest east west extent. It is not quite 50m deep at its deepest point. In late spring, the lake stratifies significantly and remains...
The implementation of concurrent engineering into many large
companies has greatly improved their product development processes.
These companies have seen significant gains in quality and customer
satisfaction with reduced product costs, defects, and time-to-market
(Lake, 1992). Many large companies have successfully employed this
relatively new product development philosophy. However, smaller...
The present study proposes to investigate the flow structure of different arrays of jets impinging on a flat surface enclosed by three walls, creating a channel that forces the air to leave in one preferential direction, generating a self sustain crossflow. Details of both the mean and some turbulence quantities...
The metallurgy and superconductivity of the Nb-Ti-Ta ternary alloy system were studied. The Nb-Ti, and Ta-Ti binary samples, and Nb-Ti-Ta ternary samples were precipitation heat treated under different schedules. After the precipitating heat treatment, the samples were characterized by X-Ray Diffraction (XRD) techniques. Equilibrium binary and ternary phase diagrams based...
A model has been developed for accurate emulation of the complex behavior of high performance dynamometers used in a broad range of applications including manufacturing systems, biomechanics research, and crash testing. The key objective of this research has been to reach the proper balance between the accuracy of emulation and...
The characteristics of the free surface in an orifice driven by a periodic forcing function have been studied both theoretically and experimentally. In the theoretical study, two wall boundary condition cases were examined: 1) the radial velocity at the wall of the orifice is zero; and 2) the axial velocity...
Air compressors are a significant industrial energy user and therefore a prime target for industrial energy audits. The project goals were to develop a software tool, AIRMaster, develop a methodology for performing compressed air system audits, and conduct field audits to refine the methodology and assess savings potential from six...
The effectiveness of a direct fire penetrator projectile equipped with an actively controlled ram air mechanism is investigated through dynamic simulation. The ram air control mechanism consists of a rotary sleeve valve which directs air flow from an inlet at the center of the nose to side ports. The projectile...
Analyzing systems during the conceptual stages of design for characteristics essential to the ease of fault diagnosis is important in today's mechanical systems because consumers and manufacturers are becoming increasingly concerned with cost incurred over the life cycle of the system. The increase in complexity of modem mechanical systems can...
The effects of varying flow rate ratio and Reynolds number on the momentum diffusion and flow development of two co-flowing, laminar streams in a rectangular microchannel are presented. The microchannel has an aspect ratio of approximately 16 with a width of 1006 μm and a height of 63 μm. A...
Impact point dispersion of a direct fire rocket can be drastically reduced with a ring of appropriately sized lateral pulse jets coupled to a trajectory tracking flight control system. The system is shown to work well against uncertainty in the form of initial off-axis angular velocity perturbations as well as...
This research studied the effects of changing from a traditional manufacturing
system to a cell manufacturing system in a value-added wood products company.
Discrete event simulation was used to describe the current system and the proposed
new systems. Parts were separated into part families that shared similar processing
requirements. From...
The effect of jet flow pulsing and blowing ratio on a jet in cross flow has been investigated. Preliminary jet flow studies were performed without cross flow and an extensive study of jet with cross flow was done for a total of nine test cases. The effect of velocities ratios...
Micro-fluid mixing is an important aspect of many of the various micro-fluidic systems used in biochemical production, biomedical industries, micro-energy systems and some electronic devices. Typically, because of size constraints and laminar flow conditions, different fluids may only have the opportunity to mix by diffusion, which is extremely rate limited....
Cavitation instabilities in elastic-plastic solids under spherically-symmetric and axisymmetric loadings were investigated using the finite element method. Both quasi-static and dynamic analyses were used to solve these problems. In the quasi-static analyses, we investigated a cavitation instability in elastic/perfectly-plastic, linear hardening elastic-plastic, power hardening elasticplastic, and constrained silver materials. Here,...
A two-dimensional model was developed to predict concentration profiles from passive, laminar mixing of concentration layers formed in a fractal-like merging channel network. Both flat and parabolic velocity profiles were used in the model. A physical experiment was used to confirm the results of the model. Concentration profiles were acquired...
A computational model is developed to study the effects of alumina layer formation on an ablative surface when exposed to high temperature particle laden gas flow. The solidification dynamics i.e., the solid and liquid alumina layer growth rate, and the heat transferred to the ablative surface are investigated. A one-dimensional...
This paper documents the investigation into injection molding, or die casting, a bulk metallic glass (BMG). A BMG is an amorphous metal of a thickness greater than 25 μm, according to leading researchers in the field. This critical thickness differentiates a normal metallic glass from a "bulk" metallic glass. The...
Interbody fusion cages are increasingly used in the treatment of spinal disease and injury in order to stabilize movement and promote arthrodesis of the vertebral bodies, but the micro-mechanics of the interaction between the cage and the adjacent host bone is not fully understood. This information has bearing on post-surgical...
Metallic foams have become widely available and have unique properties
that make them attractive for use in a variety of engineering applications. Due to
their complex structure, the behavior of foams under complex loading conditions
is a subject of continued research.
Digital volume correlation is a technique wherein full-field strains...
Droplet formation in inkjet cartridges has been studied for several decades to improve print qualities. Currents and rigid nozzle plates are used inside the cartridge to fix the size of droplets exiting the chamber. This research is focused on studying the effect of nozzle flexibility on droplet formation. A flexible...
A particle image velocimetry system was established to determine flow fields in low Reynolds number flows through a branching flow network. Due to the fabrication procedure of the test device, flows were limited to a Reynolds number of 1.5 in the largest channel. Data was acquired at each channel inlet,...
Droplet formation from a rigid and a vibration nozzle driven by a pulsing pressure is simulated. Droplet formation is simulated by using one-dimensional model. For the case of droplet formation from a vibration nozzle, the nozzle vibration is simulated by large deflection plate vibration equation. Droplet formation from a rigid...
Large-scale engineering systems provide important functions and at the same
time address serious concerns to human society. Because of the complexity and
resources involved, the development of these systems is currently a challenging
undertaking. In this work, an axiomatic design approach, based on Suhs axiomatic
design theory, and combined with...
Pedicle screw breakage and loosening remain as clinical complications of short segment instrumentation procedures for spinal stabilization. This study has directly visualized and measured elastic, plastic and total vertebral pedicle trabecular bone full-field strains in the regions immediately surrounding the pedicle screw during pedicle screw insertion by utilizing functional microCT...
The decision sequences used for troubleshooting of complex electro-mechanical systems are often ad hoc and less than optimal. This research investigated Decision Analysis and Bayesian Networks for generating an optimal decision sequence for troubleshooting. The model that was used in this research was the bleed air control system of the...
The use of a permeable membrane to mechanically constrain a film of water with an area of 12 cm² and a thickness of 150 μm in a gas/liquid contactor was investigated. The membrane separated the vapor and liquid phases, and a stiffener
plate made from a gas-permeable material was used...
The focus of this study is the effective prioritization of customer requirements in collaborative product development. The CR priorities are often retrieved by questioning and interviewing targeted customers. But the targeted customer might not always be easily questioned, because they might not always be obvious or clearly known. If customers...
Launch uncertainties in uncontrolled direct fire projectiles can lead to significant impact point dispersion, even at relatively short range. A model predictive control scheme for direct fire projectiles is investigated to reduce impact point dispersion. The control law depends on projectile linear theory to create an approximate linear model of...
A miniature reciprocating expander is being developed as part of a larger program to develop a heat actuated heat pump for portable applications. By utilizing the higher energy density of liquid hydrocarbon fuels relative to batteries, a heat actuated heat pump would be able to provide cooling for much longer...
Recent studies of flow boiling within microchannels have shown high heat fluxes, leading to successful design and testing of compact heat exchangers, cooling systems for electronics and other high efficiency, miniature components. An experimental study of flow boiling of a concentrated salt solution in microchannels is presented. Experiments examined flow...
Population counts of aquatic insects are a valuable tool for monitoring the water quality of rivers and streams. However, the handling of samples in the lab for species identification is time consuming. An aquatic insect imaging device was designed as part of a system to automate aquatic insect classification and...
Research in the miniaturization of thermomechanical systems in recent years has proven to be both rewarding and challenging. Micro-scale devices have tremendous technological potential but come with a new set of design problems. One such problem is energy storage. Heat actuated systems, driven primarily by thermal energy, take advantage of...
With growing concerns on environment impact of industrial product development, the product developers are seeking better solutions to achieve desired environmental benign requirements by the regulators and customers besides economic growth. During the last decade, some of the most successful product development companies (such as HP) have established their own...
The transfer of air travelers with disabilities between a mobility aid and an aircraft seat is a major source of injury for both the travelers and the airline personnel assisting in the transfer. The risk to both parties might be reduced through the biomechanical study of the transfer task. Such...
Infrared (IR) thermography is applied to estimate heat transfer rates in external and internal microscale convective flows. The technique and analysis are developed in the context of external jet impingement flow and internal single-phase liquid flows. A heated-thin-foil thermography technique is applied to perform surface temperature visualization on a submerged...
Sawmills are very complex systems that involve many manufacturing processes. The variability of their raw material adds further to this complexity as each log has characteristics that determine its processing path. Therefore, computer simulation is a very useful technique for analyzing sawmill performance. This thesis describes a simulation computer model...
A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
A reduced-order dynamic model is derived that captures the primary dynamics of a jet-in-crossflow. This is significant progress toward the end goal of reduced order model based closed-loop flow control. The reduced order model is a set of differential equations obtained through the use of snapshot based Proper Orthogonal Decomposition...
Jets in crossflow are used in a wide range of engineering applications and have been studied for more than 60 years. The transversal penetration and structure of a jet placed in a crossflow is known to be strongly three-dimensional. It is believed that, by using a pulsed jet inclined in...
Two-phase flow in a fractal-like branching microchannel heat sink may have
enhanced heat transfer capabilities over single phase flow in the same branching
channel network. In order to exploit this potential, a complete understanding
of flow boiling in this geometry is required. The fractal-like geometry is similar
to that of...
Microscale fluid processes are an increasingly important subgroup of fluid mechanics. Applications for heat transfer and micro-electro-mechanical devices use flows on the scale of less than one hundred microns. This study is part of a larger work in which a multiphase, high shear environment is studied in a microchannel that...
An experimental investigation into the behavior of micro-bubbles flowing
through a micro-channel has been conducted. Experiments were performed within a
rectangular micro-channel with dimensions of 5 cm x 13.2 mm x l30 jim. Bubbles
were generated in an electrolyte solution by electrolysis at the lower channel wall near
the inlet....
An experimental study was performed in which an ammonia-water solution was desorbed within a branching fractal-like microchannel array. The solution entered in the center of a disk, and flowed out radially until discharging in to a gravity-driven separation chamber. Heat was added to the ammonia-water through a thin wall, above...
A unique channel surface enhancement technique via diffusion-bonding a layer of conductive fine wire mesh onto the heating wall was developed and used to experimentally study flow boiling enhancement in parallel microchannels. Each channel was 1000 μm wide and 510 μm high. A dielectric working fluid, HFE 7000, was used...
A need exists to develop a non-destructive testing technique that can identify
the formation and propagation of diagonal tension cracks in conventionally
steel reinforced concrete deck girder (RCDG) highway bridges in the State of
Oregon. Such a technique could be included into a structural health
monitoring (SHM) system installed on...
With the miniaturization of microelectronics and increase of processor speeds in the last few decades, thermal management is drastically affecting overall packaging and system capabilities. Due to the special needs introduced, research focusing on microscale cooling has increased. This study combines the positive characteristics of single- and two-phase flows in...
A brake-based wheel speed control system for a rear-wheel drive vehicle is developed and simulated in this thesis. The OSU mini-Baja vehicle team will use this study in the development and implementation of a similar system for upcoming competitions. Vehicle submittals must differ to a specified degree from previous year’s...
Aquatic insect population counts can be a good indicator of the health, or water quality, of rivers and streams. Stoneflies (Plecoptera) are particularly susceptible to pollution in streams. However, today’s current method for obtaining these population counts requires biologists to examine individual specimens under a microscope for identification to the...
A distinct characteristic of legged locomotion is its periodic nature. This periodic motion, in the form of a periodic orbit, has been the target of many walking and running control strategies. The spring loaded inverted pendulum (SLIP) has become a popular model of sagittal plane locomotion, exhibiting behavior characteristic of...
Normal gait of human is believed to be an adapted motor control result of optimal behavior of individual. Normal gait would be altered by aging or injury without being perceived. Subtle changes in gait which is not easy to detect, can cause many serious problems including joint pains and even...
Extending the flight time of an autonomous unmanned air vehicle by soaring is
considered. A suboptimal controller is developed and successful static soaring is
demonstrated with a 6 degree of freedom glider model. Altitude gain rates of between
¼ and ½ m/s are achieved with this simple implementation.
A hybrid...
The droplet formation process in the vicinity of the nozzle exit and the behavior of a spreading droplet during impingement on a smooth glass surface were studied. Two nozzle geometries were tested. The first case was a stiff stainless steel nozzle plate 0.787 mm thick. The second case was a...
An experiment was conducted to examine the possible impact of an engineering design and problem solving process overview document on knowledge management and capture. A process overview document was first created. Next, two multi-disciplinary design teams worked over a two-week span to develop concepts to address a problematic opportunity. One...
Product design is often driven by customer needs and desires. In this case the customer is the US military, and the desire is to have a cooling unit small enough and light enough to incorporate into hazard suits for use in desert combat. The Micro technology-based Energy and Chemical Systems...
It is crucial for the development of high quality products that design requirements are identified and clarified as early as possible in the design process. In many projects the design requirements and design specifications evolve during the project cycle. Shifting needs of the customer, advancing technology, market considerations and even...
Proper orthogonal decomposition (POD) in conjunction with the Galerkin projection has been used as a model reduction technique for the tractable real-time control of high-dimensional systems. While POD based model reduction may improve the tractability of high-dimensional models, the nonlinear POD based model may be impractical for control due to...
Design and preliminarily characterization of two thermally-actuated pumps is presented
in this thesis. The unique feature of both pumps is the presence of periodic asymmetrical
structures on the channel walls. Two heat transfer effects are used with surface
asymmetry to generate forces that drive the fluid in a preferential direction...
Background: Hip replacements are considered routine operations which improve the quality of life in patients by reducing pain and restoring function. There are many variations in prostheses with varying benefits and disadvantages.
Methods: Literature from the United States and Europe was collected on total hip replacements between 2001 and the...
For piezoelectric stack (PZT) driven droplet generator, the driving waveform
and driving frequency effect on liquid filament shape and droplet characteristics have
been experimentally studied. The experimental study was based on a PZT driven
droplet generator with known geometric design parameters and working fluid
properties. A lumped-element-model (LEM) constructed to...
A large part of low-back pain occurrences are due to disc herniation or prolapse of the nucleus pulposus. An alternative technique to existing treatments of low back pain includes nucleus pulposus replacement by an artificial material to relieve pain and restore normal function. To date, there has been a deficiency...
People often grow increasingly culturally confused when spending significant amounts of time in a foreign land. Identity can become lost only to reform in the image of the host society. This thesis presents a creative nonfiction series of essays that explore the author’s loss of self and contextual identity, the...
An experimental study of the near-field flow structure produced by an incompressible turbulent Acoustically Self-Excited Jet (ASEJ) in a large enclosure using Particle Image Velocimetry (PIV) is presented. The salient feature of this jet is that it provides an increase in near-field mixing and turbulence without additional external power input....
It is hypothesized that increases in pressure drop due to vapor generation during boiling in microchannels can be reduced by extraction of vapor at its point of inception. Ultimately, this local vapor extraction decreases the pressure drop required to drive the flow through a fractal-like branching, microchannel flow network within...
Air travel presents several problems for passengers with disabilities.
One in particular is how they get from their wheelchair and to an aircraft seat.
The commonly used manual transfer method is hazardous to the assistants
and the passenger. There are other alternatives, but they have plenty of room
for improvement....
Oregon Department of Transportation’s bridge no. 9743b is a multi-span, two-girder steel deck bridge connecting the busy interstates 5 and 205. Vertical cracks have been detected in the welded girder-to-crossbeam connections at the bents. Distortion-induced fatigue is suspected to be responsible for the cracking. Linear elastic beam analysis, 2-D and...
Students participating in international engineering internships are still relatively rare. It is commonly held that more engineering students would choose to intern abroad if there were role models available, as there are in other disciplines. Profiles of past students, participants, and Alumni serve as role models to perspective students allows...
An experimental study of absorption of ammonia into a constrained thin film of ammonia-water solution is presented. A large aspect ratio microchannel with one of its walls formed by a porous material is used to constrain the thickness of the liquid film. Experiments were performed at a pressure of 1,...
Driven by the need for high energy-density power sources, demand has
stimulated the development of small-scale engines. A small-scale engine
with a fuel supply could replace batteries and utilize higher energy-density
liquid hydrocarbon fuels; such an advance could deliver a new age of
portable devices. Currently, operable small-scale engines exist;...
Droplet formation from a flexible nozzle plate driven by a prescribed-waveform excitation of a piezoelectric is numerically investigated using a computational fluid dynamics (CFD) model with the VOF method. The droplet generator with a flexible nozzle plate, which is free to vibrate due to the pressure acting on the plate,...
Transportation plays such an important role in daily living that, without it, a person might be totally homebound. The nation’s air travel system for persons with disabilities is an area of substantial dissatisfaction, with both passengers and the airline industry recognizing the need for improvement. One of the major concerns...
A PID controller was designed to control the performance of an oil-heated fractal-like branching microchannel desorber for use in an ammonia-absorption refrigeration system. Both the amount and concentration of ammonia refrigerant generated at the desorber can be controlled by choosing the rectified circulation ratio as the controlled variable in a...
The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
A Mixed Reactant Single Chamber (MRSC) Fuel Cell is a relatively recent concept in the field of fuel cell engineering originally developed in the late 1950’s. Typical fuel cells have separated reactants (a separated fuel and oxidizer) that react on their usually non-selective electro-catalytic materials. A mixed reactant fuel cell...
Coordinating multiple robots to achieve a complex task requires solving two distinct control problems: the high-level control problem of ensuring that each robot aims to perform a useful task (e.g., coordination) and the low-level control problem of ensuring that each robot actually performs the correct actions to achieve its task...
Flow separation is an important phenomenon in fluid dynamics because of the effect it has on lift and drag on immersed bodies. Areas of swirl within a separated flow region may have a distinct effect on the surface forces, modifying the lift and drag characteristics. A correlation between the passage...
A non-intrusive measurement technique for direct quantitative thermal visualization of channel wall temperatures in two phase microchannel flows using infrared thermography (IRT) is presented. Specifically, the measurement of top channel wall temperatures in a fractal-like branching microchannel silicon heat sink during flow boiling is demonstrated and thoroughly documented. Obtaining quantitative...
Field biologists are in need of more specialized and technical equipment than they are able to produce on their own in order to collect data more efficiently or gather data that is not currently available. This presents a challenge for design engineers because these products are typically highly specialized and...
Introduction Over the past century, great technological advances have enabled high-speed communication and transportation across the globe. This technology trend combined with the needs of continuous expansion of market place has motivated major corporations not to restrict their business activities to within a single principality. Engineering design activities can take...
Based on experimental investigations the present study evaluates flow instability and
void fraction in a fractal-like branching microchannel network with rectangular cross-section. The hydraulic diameter of the channels ranged from 308μm at the inlet to 143μm at the outlet. The flow network used is characterized by set branching ratios for...
Identification and population counts of soil mesofauna can be an
important tool for soil ecologists to determine the soil biodiversity. Information
provided from population counts can give insight to soil ecologists about the
effects of human land use, monitoring soil and water health, benefits of soil
biodiversity in agriculture, and...