Surface acoustic wave (SAW) sensors are versatile devices that can be configured to sense a variety of measurands such as temperature and pressure. The potential use of surface acoustic wave devices for magnetic field detection is explored in this study. Compared to current magnetic field sensors, a sensor based on...
Magnetically programmable surface acoustic wave (MP SAW) devices were designed, fabricated and characterized in this thesis using integrated giant magnetoresistive (GMR) bits with interdigital reflectors. This provides a proof of concept of a novel storage element on radio frequency identification tags. Interdigital transducers (IDTs) on a piezoelectric substrate are used...
As more advanced hybrid electric vehicles begin emerging onto the commercial market, design algorithms for their control become increasingly more complicated. One major hurdle for designers is the mitigation and control of the created high frequency harmonics caused from switching the dc voltage into an ac voltage by use of...
Dense electrical recording of biosignals has been developed to provide spatial resolution and precise temporal information for health monitoring, diagnostics, and clinical research. However, more electrodes require more wires, and wiring density quickly becomes a limiting factor. To break this bottleneck, we proposed a frequency-division multiplexing (FDM) based architecture for...
Microfluidics is an evolving field that focuses on the manipulation of small fluid volumes. Because of its micron-sized features, it is the basis for many lab-on-chip and point-of-care diagnostic devices. The devices are predominantly molded from polydimethylsiloxane (PDMS); however, production is a multi-hour or multi-day process that typically requires clean...
Six parent clones and their 15 single-crosses of tall fescue (Festuca arundinaceae, Schreb) were row-planted in Corvallis, Oregon, row and sward-planted in Columbia, Missouri, and evaluated for genetic variability, genotyp-eenvironment interactions and interrelationships in acid detergent fiber (ADF), neutral detergent fiber (NDF), hemicellulose (HCL), crude protein (CP) and in vitro...
In a story of his life Les reflects on what he
has gained and what he has lost while seeking success in
the moving and shifting of military and academic life
through homes and schools all over the United States.
He describes himself as between races, languages, and
cultures.
These essays are an attempt to rebuild memories that explore the nature of work and family. They explore how work knocks against the joints of the body and against the joints between family members, and, as time passes, how the next generation inherits the family line of work only to...
Improved sensitive techniques were developed for the
determination of soluble proteins in grape, juice and wine.
These techniques which permitted direct sample analysis
without prior dialysis or concentration, were used for: 1)
characterization of heat unstable proteins, 2) evaluating
the effect of bentonite fining and ultrafiltration (UF) on
the soluble...
The efficiency of cellulose hydrolysis under straight saccharification and simultaneous saccharification and fermentation (SSF) conditions was evaluated using three lignocellulosic materials (switchgrass, cornstover, and poplar), which had been pretreated with dilute sulfuric acid under conditions which optimized xylose concentrations in the prehydrolysate liquid. Yields of glucose, cellobiose and ethanol obtained...
As a significant class of nonlinear systems, bilinear systems (BLS) are extensively developed in the past years. In addition to their advantages over linear systems which are often not adequate to represent accurately many control processes, the BLS are particularly appealing in modeling biological systems in which parametric controls are...
The general expressions for finding the network functions, e.g.,
the immittance and the scattering parameters, of a general, uniformly
coupled n-line structure in an inhomogeneous medium are derived in
terms of the normal mode parameters of the system. These are used to
compute or to derive the explicit expressions for...
The adenovirus replication origins reside in the inverted terminal
repetition (ITR) sequences. Replication proceeds unidirectionally by a
strand-displacement mechanism from either or both origins to produce
duplex daughter DNA plus a displaced parental strand. The displaced
strand can be duplicated by two different routes. The cis pathway involves
intramolecular hybridization...
The effect of salt (0, 0.9, 1.7, 2.5%) and pH (range 4
to 10) on surimi gels made from Pacific Whiting (Merluccius
productus) was investigated. Gel-forming ability was measured
by the torsion test. In general, surimi gels
increased in gel strength with increased pH. Breaking shear
stress increased to a...
Dungeness crab (Cancer magister) is an important commercial species along the west coast of North America, and its population dynamics are highly influenced by interactions between environmental variability and early life history distribution. However, the distribution of the early larvae stages of Dungeness crab offshore is poorly known. To fill...
With the growing trend in use of 3D laser scanning technology for data collection, it is important to study the various potential applications of this revolutionary technology. One such application is the measurement of road roughness at both large and small scales. At larger extents, terrestrial laser scanning (TLS) is...
Full Text:
of Road Quality
AN ABSTRACT OF THE THESIS OF
Abby Chin for the degree of Master of Science
Geotechnical engineers design and analyze the interface between the natural and built environments, often based on uncertain and inherently variable data due to the nature of the building material, soil. Engineers must estimate the subsurface conditions at a site using historical, in-situ, and laboratory testing data. However, only discrete representative...
Global biodiversity decline is primarily driven by habitat loss. Deforestation, the primary driver of terrestrial habitat loss, is increasing worldwide, with the most significant impact in the world biodiversity hotspots. Sadly, specific knowledge of such impacts in biodiversity-rich but data-poor countries are still unknown, and many national and regional narratives...
Both oxy-Cope and siloxy-Cope rearrangements involve
(1, 3) and (3, 3) sigrnatropic shifts. Both the concerted mechanism,
and the stepwise mechanism via a diradical intermediate are possible.
In a cyclic system such as cis-l-vinylcyclooct-3-en-l-ol, the thermal
rearrangement takes place preferably through a diradical intermediate.
At high temperature, the reaction also...
A single oral dose of DDT, ranging from 40 to 200 mg/kg, had
a drastic effect on the in vivo acetate metabolism in rats. The normal
elimination pattern of the expired ¹⁴CO₂ from ¹⁴C-labelled
acetate was distorted, and the rate of output of the ¹⁴CO₂ was decreased.
The ratio of...
The herbicides Diquat (1, 1'-ethylene-2, 2'-dipyridylium
dibromide), Paraquat (1, 1'-dimethyl-4, 4'-dipyridylium dichloride),
and Gramoxone (1, 1'-dimethyl-4, 4'-dipyridylium dimethyl sulphate), and the spreader X-77, a mixture of alkylaryl-polyethylene
glycol, free fatty acids and isopropanol, were tested by
several soil microbial methods in an attempt to find out if concentrations of these...
This thesis addresses the research question: How do different
physical layouts of high-rise college dormitories affect residents'
perceptions of satisfaction and crowding? The purpose of the research
was to outline some design strategies that could be used to provide
designers with information which can help them to design better high...
The purposes of this study were to identify factors that
influence industrial education teachers to use computers in their
instruction and to explain the relationships among these factors.
For the purposes of this study, the term "to use computers" meant use
of computers in one or more of the following...
Renewable energy technology continues to grow in popularity as countries aim to reduce greenhouse gas emissions. Land based and offshore wind turbines are one option for expanding renewable energy sources. However, as wind energy adoption increases, so does the need for enhanced monitoring of wind turbines’ potential effect on local...
The goal of this project is to create a lightweight radioactive isotope identification program for an embedded system using the C programming language to perform isotope matching on a subset of isotopes. First, the physics behind radioactive spectra and their key features are explained. Next, the characteristics of the spectra...
Cell counting is a key tool used in biological and clinical laboratories, but at present, commercial cell counters are large and expensive. CMOS technology is a promising platform for creating small, low-cost sensors but currently lacks a robust method of directly interfacing these sensors with the microfluidic networks needed for...
Due to increasing populations, food production must increase significantly to be sustainable. The Internet of Things has been shown to have potential in the field of agriculture to make farming practices more efficient. However, for IoT to be properly integrated into agriculture, sensors must be applied within the field and...
Within the past decade, the continued-scaling of CMOS processes and improvements in industry mixed-signal integrated-circuit designs have enabled a rapid decrease in the cost, form-factor, and power for point-of-care diagnostics and electrochemical instrumentation. Similarly, advances in low-power RF designs have prompted entire System-on-Modules supporting widely varied Internet-of-Things (IoT) applications. The...
Electroanalytical techniques allow scientists and engineers to characterize bulk solutions as well as interfaces. Potentiostats are commonly used by researchers in a variety of disciplines to analyze the chemistry which occurs at a working electrode surface. Advancements in microelectronics and the proliferation of open-source designs have allowed researchers to construct...
Wearable electronic devices are becoming increasingly widespread and are being used to fulfill a variety of needs. These devices range from purely infotainment type systems such as smartwatches and fitness oriented devices to specialized medical devices such as insulin pumps and heart-rate monitors. A challenge faced with all of these...
Wind turbines serve an increasing proportion of total energy generation, with expanded onshore and offshore installations proceeding worldwide. Continued construction, expansion, and operation of wind energy installations must be managed in conjunction with effects on local and migratory wildlife, specifically bird and bat species that may be affected by wind...
Radiation is part of our life. Most people may know a radioactive source is very dangerous. But there are very few situations people are exposed to uncontrolled radionuclides above background. A radioactive source can emit gamma rays which are the highest energy type in electromagnetic radiation.[2] Gamma rays are like...
Modern sensors are complex systems comprising multiple sub-systems such as transducers, analog and mixed-signal interface circuits, digital processing circuits, and packaging. Over the last few decades, innovations in these sub-systems combined with their increased integration in complementary metal-oxide semiconductor (CMOS) processes have led to the rapid growth in sensors for...
Over the last decades, CMOS-integrated sensors have made impressive progress in performance, form-factor, and energy-efficiency for various applications such as imaging, physical/chemical sensing, bio/health monitoring. In the era of the artificial intelligence (AI) and the internet-of-things (IoT), such CMOS-integrated sensors are essential for massive and comprehensive data acquisition, where sensing...
Harvesting energy from ambient sources can provide power autonomy to energy efficient electronics and sensors. The last decade has seen a multitude of ways to scavenge energy from various sources like solar, thermal, electromagnetic, electrostatic, piezo-electric and many more. Thermal energy from human body heat is ubiquitous and can be...
Silicon integrated circuit (IC) technology has enabled numerous electrical and optical sensors used in biological and chemical assays, where they can increase performance while decreasing cost and size compared to traditional detectors. There is significant potential to further leverage IC technology for lab-on-chip applications, creating affordable and portable medical diagnostic...
Impedance measurements are increasingly demanded in modern CMOS sensing systems as impedance is the most common electrical signal obtained from sensors, delivering physical, chemical and biomedical quantity changes. Impedance sensing for wide interested frequency, broad dynamic range, and various sensor interfaces has numerous challenges, especially targeted in CMOS miniaturization with...
Flow rate sensors for in situ gas or liquid monitoring typically comprise multiple transducer elements, including a heater and one or more temperature sensors to measure the rate of heat energy removal by the flowing fluid. The need for multiple transducer elements limits feasibility of shrinking these sensors to microfluidic...
The purpose of this study of the life and career of Dr. Carl
Leonard Anderson was to recount his professional contributions to
the field of health and relate these to public health and health education. The major emphasis of this study concerned Dr. Anderson's
professional life.
The accomplishment of the...
Recent climate projections predict more frequent and severe drought conditions in western Oregon which is a threat to forest health, productivity, and structure. Land managers are increasingly concerned with how to create forest drought resistance: a tree or stand’s ability to maintain its growth rates during a drought, and resilience:...
Due to the advancement of incredibly low power microcontrollers and small form factor integrated circuits, energy harvesting can be considered as an alternative, low power source for remote ocean sensing and measurements. To demonstrate the effectiveness of harvesting thermoelectric energy contained in the temperature differential between ocean surface water and...
The prevalence of obesity is increasing worldwide, causing a subsequent increase in insulin resistance (IR), metabolic disorders, and cardiovascular diseases. Although these conditions significantly impact both the individual and society, their etiologies have not been discovered, inhibiting potential prevention and treatment. Alterations to mitochondrial metabolism are implicated in the development...
African American male students are a small portion of the student body at NCAA Division 1-A schools, but they make up a large portion of population of college football players. African American male college students are also one of the most at-risk student populations on campus in regards to retention....
Crystal morphology and dimensionality of single-crystal semiconducting materials can have dramatic effects on the optical and electrical properties. Organic photovoltaic (OPV) materials and fluorinated graphene folds are two materials that show these dependencies. Anthradithiophene (ADT), is an OPV that can be functionalized with different side groups to form different crystal...
The intent of this research is to explore the entire design space of mechanism topologies by using a graph grammar synthesis approach. A new graph representation of planer mechanism has been developed to represent the planar mechanism with revolute (R), prismatic (P), and pin-in-slot (RP) joints. Following Gruebler's equation, the...