Recent superconducting thin films studies have attempted to create pure metal layer films of Niobium and Titanium with the same properties of superconducting NbTi wire used in industry. These studies have all reported depression of the superconducting properties of the pure metal films which has been attributed to the proximity...
A steady state, axial flow thermal conductivity test apparatus was designed and constructed to operate between room temperature and approximately 4 Kelvin, and to be compatible with existing electronic instrumentation and a continuous flow cryostat. The test design included a radiation shield that had its temperature profile matched to that...
Wildfire prevention operations like forest thinning and forest fuel removal result in large volumes of woody biomass available for utilization. In 2007 alone, the US federal government spent nearly $2 billion to fight forest fires on federal lands. Annually, the USDA Forest Service spends $1 billion to thin young trees...
A calorimeter capable of measuring the heat capacity of 1 mg size samples from
4.2 to greater than 100 K has been designed, constructed, and tested. The sample is
bonded to the end of a 0.002 inch diameter, 0.5 cm long chromel-constantan
thermocouple (type E) and heated optically with a...
In wood-based composites, the glue-line (interface) between wood-strands affects the stress transfer from one member to the next. The glue-line properties determine the rate of load transfer between phases and these properties depend on wood species, surface preparation, glue properties, glue penetration into wood cells, and moisture content of the...
The metallurgy and superconductivity of the Nb-Ti-Ta ternary alloy system were studied. The Nb-Ti, and Ta-Ti binary samples, and Nb-Ti-Ta ternary samples were precipitation heat treated under different schedules. After the precipitating heat treatment, the samples were characterized by X-Ray Diffraction (XRD) techniques. Equilibrium binary and ternary phase diagrams based...
Mechanical behavior of Nb-Ti superconducting composites with copper matrices have
been studied experimentally and theoretically.
Experimental work includes extensive measurements of Cu/Nb-Ti composite system.
Techniques for fine fiber testing and composite wire measurement have been developed.
Experimental parameters examined in this research include geometry, hardness, Young's
modulus, Poisson's ratio, yield...
Mechanical properties of Nb-Ti composite superconducting wires were tested at
room temperature. The results were analysed using simple composite theory, the rule
of mixtures. The objective is to predict the mechanical properties of Nb-Ti
superconducting composite wires as a function of volume ratio and geometry of the
components, the composite...