Currently, the temporal arc distribution across the ingot during the vacuum arc remelting (VAR) process is not a known or monitored parameter. It is has previously been shown that arcs can spatially constrict during VAR, and this constriction can lead to undesired defects in the material. Additionally, correct accounting for...
A comparison was made of Al₂O₃ films deposited on Si via prompt inorganic condensation (PIC)
and atomic layer deposition (ALD). Current–voltage measurements as a function of annealing
temperature indicate that the solution-processed PIC films, annealed at 500°C, exhibit lower
leakage and roughly equivalent breakdown strength in comparison to ALD films....
Cellulose nanocrystal (CNC) aerogels are coated with thin conformal layers of Al₂O₃ using
atomic layer deposition to form hybrid organic/inorganic nanocomposites. Electron probe
microanalysis and scanning electron microscopy analysis indicated the Al₂O₃ penetrated more
than 1500 μm into the aerogel for extended precursor pulse and exposure/purge times. The
measured profile...
Vacuum arc remelting (VAR) is a secondary melting process for exotic alloys. The main purpose of this process is to increase the input ingot’s physical and chemical homogeneity. This is accomplished through the application of a high current that melts the material through the emergence of electrical arcs that induce...
The behavior of a metal vapor plasma arc in a vacuum arc remelting (VAR) furnace is believed to contribute to the formation of defects in reactive metal and super-alloy ingots. Industry standard instrumentation, which includes electric current and voltage measurements, can asses the stability of an arc but cannot predict...
In the past, fisheries and aquaculture researchers in Africa have been handicapped by poor access to current scientific literature and difficulties in getting published in visible outlets. Efforts in the past decade to improve access, awareness and use of information have flourished. We examine whether these efforts are reflected in...
Full Text:
Journalof Food Science and Technology
2
Tanzania x 2
American Journalof Applied Sciences
1
In the past, fisheries and aquaculture researchers in Africa have been handicapped by poor access to current scientific literature and difficulties in getting published in visible outlets. Efforts in the past decade to improve access, awareness and use of information have flourished. We examine whether these efforts are reflected in...
Full Text:
are not covered by DOAJ: African Journalof Environmental Science and Technology; Ethiopian Journalof
The development of geothermal resources has been delayed in the United States for several reasons: the ready availability of low-cost fossil fuels, the general remoteness from load centers of geothermal areas, and more recently the illusion that nuclear power plants would provide all our needed power at a low cost...
Five Ultra light Fabric Reflux Tubes (UFRTs) were tested in a thermal vacuum chamber at the National Aeronautics and Space Administration's Johnson Space Center in September 1994. These test articles were design and fabricated by staff at the Pacific Northwest Laboratory, operated by Battelle Memorial Institute for the United States...
This report establishes an industry knowledge base for existing anchoring and mooring techniques as applied to wave energy conversion (WEC) devices in and around Oregon. This report on anchoring and mooring techniques is derived from the cumulative experiences of engineers and scientists with many years of experience analyzing, designing and...
This paper reports the feasibility of using surface mount adhesives to produce low temperature microchannel arrays in a wide variety of metals. Sheet metal embossing and chemical etching processes have been used to produce sealing bosses that eliminate channel laminae, resulting in approximately 50% material savings over traditional methods. An...
Full Text:
Institute ofTechnology, Rochester, NY. He is currently working as a manufacturing engineering at Tektronix
The
experimental
procedure
for
evaporating
silicon
monoxide
together
with
the
methods
for
measuring
the film
thickness
have
been
investigated.
The
effects
of
various
process
parameters
on
the
rate
of
deposition,
such
as
source
temperature
and
source-substrate
distance,
have
been
studied.
The
uniformity
of
silicon
monoxide
films
deposited
by
this
particular...
A moderate high-pressure processing (HPP) treatment is proposed to accelerate the shredability of Cheddar cheese. High pressure processing (345 and 483 MPa for 3 and 7 min) applied to unripened (1 d old) stirredcurd Cheddar cheese yielded microstructure changes that differed with pressure level and processing time. Untreated and pressure-treated...
Two large-resistance realisation schemes are proposed using switched-capacitor
circuits. The equivalent resistance of the array realisation
increases as the third power of the number of capacitor pairs, and
that of the ladder realisation increases exponentially. The equivalent
resistance for the ladder scheme also grows with the capacitance
ratio. Using these...
Cooling of freshly formed Cheddar
cheese is thought to be one of the processing
steps that requires tighter control
to achieve more uniform and consistent
product quality. Cheese samples, obtained
after pressing, were rapidly cooled
to 5, 15, 25, or 35°C. Commercial samples
and test cheese at 7, 30, 60,...
Vacuum evaporated dielectrics for use in MOS structures
were studied in this research project. Dielectric
films were deposited on substrates by electron bombardment
evaporation of sapphire and quartz source materials.
These deposited films were studied using infrared spectroscopy,
index of refraction, density, and dielectric constant
measurements. Etching tests were also...
The properties of evaporated aluminum-oxide films were investigated. The characteristics of MOS devices
made with single-layer aluminum-oxide films and double-layer
films which were made by evaporating aluminum oxide
over thermally-grown silicon dioxide as gate insulation
have been investigated. Vacuum-evaporated aluminum oxide
has features which are suitable for fabricating MOS devices....
Analysis of substrate noise coupling has been performed for a 0.18¹m lightly doped silicon germanium BiCMOS process. Techniques to minimize noise coupling in the chip and board design are presented, as well as methods for accurate modeling for substrate noise coupling simulations. Measurements from a test chip were taken to...
This dissertation has two objectives. The first objective is to determine where best to situate the study of mentoring (i.e. the 'making of scientists') on the landscape of the history of science and science studies. This task is accomplished by establishing mentoring studies as a link between the robust body...
Hard Fescue (Festuca longifolia Thuill.) has potential for in
creased turf use but does not respond well to normal seed production
management practices in Oregon. Field burning (the normal residue
management practice) results in reduced seed yields in commercial hard
fescue seed production fields but stimulates seed production in Chewings...
This chapter addresses compost quality specifications, chemical and physical properties of compost, evaluation of compost maturity and stability, and variability in compost analytical data.
Ultraviolet-protective compounds, such as mycosporine-like amino acids (MAAs) and related gadusols produced by some bacteria, fungi, algae, and marine invertebrates, are critical for the survival of reef-building corals and other marine organisms exposed to high-solar irradiance. These compounds have also been found in marine fish, where their accumulation is thought...
This work sought to determine high pressure processing (HPP) effects on the activity of cathepsins B and D in the muscle of mackerel (Scomber scombrus) and horse mackerel (Trachurus trachurus). In mackerel, the cathepsin B activity decrease reached 40% at 450 MPa while in horse mackerel, low and intermediate pressures...
In the semiconductor industry, numerous potential occupational exposures exist as a result of the diversity of chemical and physical hazards unique to integrated circuit manufacturing. The hazards associated with maintenance tasks are challenging because the sporadic nature of the tasks make exposure monitoring difficult. In particular, vacuum pump maintenance is...
In my view, ecocriticism needs a foundation in something akin to metaphysics. This work in progress began as an effort to find such a foundation. In the course of working on it, I discovered philosophers today, mostly young, clearly a new generation, philosophizing under the umbrella term “speculative realism” what...
The work reported herein constitutes a final report for a project funded by the U.S. Department of Interior, Office of Water Resources and Technology, Grant No. 14-31-0001-4218.
This dissertation explores the structural dynamics of human understanding and particularly the concept of meaning and its connections to concepts of ultimate ground, necessity and contingency, language, and perception. It focuses on the history of the concept of meaning in early twentieth-century European physics and philosophy, through an analysis of...
In this thesis, novel design techniques have been proposed for implementing high-linearity SC circuits in a standard digital CMOS process. They use nonlinear MOSFET capacitors instead of linear double-poly capacitors. To reduce their nonlinearities, a bias voltage is applied to keep MOSFET capacitors in their accumulation regions. For further reduction...
The future of mixed-signal, memory, and microprocessor technologies are dependent on ever increasing analog and digital integration, higher cell densities, and demand for more processing power. As a result MOSFET device dimensions continue to shrink to meet these demands. A side effect of device scaling is increased variability at each...
During the course of ripening, Cheddar cheese frequently develops
a flavor defect described as fruity. Recent work has indicated
that the use of certain starter cultures ultimately results in the
development of the defect as the cheese ages. The flavor compounds
responsible for the defect, however, have not been elaborated....
In February 1905 the Oregon State Academy of Sciences formed in
Portland to promote scientific research and diffusion of scientific
knowledge in Oregon. The founders also planned to assist in the
discovery and development of the state's natural resources. The
Academy was the first scientific society in Oregon with professional...
Jalapeño peppers are usually consumed raw and fresh with minimal processing. They
contain antioxidants and bioactive compounds which are of human health benefits.
There have been an increasing number of reports of foodborne outbreaks attributed to
inaccessibility of sanitizers to Salmonella , E.coli and Listeria monocytogenes when
embedded in fruit...
Increasing interest has been shown in the irradiation sterilization
and irradiation pasteurization of foods, but problems of off-flavors
and odors are still unsolved, especially in the case of dairy products.
From the flavor chemistry point of view, milk lipids are very highly
susceptible to irradiation effects. Therefore, this investigation was...
Karl Jordan (1861-1959) was an extraordinarily productive entomologist who influenced the development of systematics, entomology, and naturalists' theoretical framework as well as their practice. He has been a figure in existing accounts of the naturalist tradition between 1890 and 1940 that have defended the relative contribution of naturalists to the...
At the Oregon State University heating plant the primary source
of heat energy is natural gas with crude oil as the standby supply of
fuel. In the future, as natural gas becomes a rarer commodity, more
reliance will be placed on the use of the more expensive, more polluting,
but...
The use of honey bees to pollinate apple orchards seems natural, even inevitable. This dissertation examines the relationship of beekeeping and apple growing in Hood River, Oregon in the mid-nineteenth to the mid-twentieth centuries, as a case study in the development of commercial pollination service. Within this time period the...